› UKTH forums › 🛜 Wireless Routers & Modems › DrayTeK & Wireless › Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? › Reply To: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode?
Right now using mobile telnet.
DrayTek> vdsl status
———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 77976000 bps US Actual Rate : 20000000 bps
DS Attainable Rate : 78065656 bps US Attainable Rate : 22670304 bps
DS Path Mode : Fast US Path Mode : Fast
DS Interleave Depth : 1 US Interleave Depth : 1
NE Current Attenuation : 12 dB Cur SNR Margin : 6 dB
DS actual PSD : 1. 2 dB US actual PSD : 1. 4 dB
NE CRC Count : 383 FE CRC Count : 42313
NE ES Count : 307 FE ES Count : 38055
Xdsl Reset Times : 0 Xdsl Link Times : 1
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
——————————– ATU-C Info ———————————
Far Current Attenuation : 11 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544eb206
DSLAM CHIPSET VENDOR :
DrayTek> vdsl status counts
———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
[ Counters: Showtime ]
Near End Far End Note
ElapsedTime : 228064 228064 (seconds)
CRC : 383 42313
FEC : 5503 3919747
HEC : 0 0
CRC_P : 134 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 307 38055
SES : 0 67
LOSS : 0 1760
UAS : 0 0
LOFS : 0 0
[ Counters: 15Min ]
Near End Far End Note
ElapsedTime : 464 464 (seconds)
CRC : 1 1
FEC : 13 4
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 1 1
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0
[ Counters: 1DAY ]
Near End Far End Note
ElapsedTime : 2264 2264 (seconds)
CRC : 1 2
FEC : 26 11
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 1 2
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0
DrayTek> vdsl status more
———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Near End Far End Note
Trellis : 1 1
Bitswap : 1 1
ReTxEnable : 0 0
VirtualNoise : 0 0
20BitSupport : 0 0
LatencyPath : 0 0
LOS : 0 0
LOF : 0 0
LPR : 0 0
LOM : 0 0
SosSuccess : 0 0
NCD : 0 0
LCD : 0 0
FECS : 5505 3919747 (seconds)
ES : 307 38055 (seconds)
SES : 0 67 (seconds)
LOSS : 0 1760 (seconds)
UAS : 33 16569854 (seconds)
HECError : 0 0
CRC : 383 42313
INP : 0 0 (symbols)
INTLVDelay : 0 0 (1/100 ms)
NFEC : 255 255
RFEC : 16 16
LSYMB : 5410 20895
INTLVBLOCK : 255 255
AELEM : 0 —-
Only PSD info is with decimal values, but snr it’s just round to full.
You need to login in order to vote