› UKTH forums › 🛜 Wireless Routers & Modems › DrayTeK & Wireless › Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? › Reply To: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode?
We have all been there, I had the DrayTeK 130 in for ages and G.inp would not kick in, I finally plugged in my Fritz!Box 3490 and two days later G.inp was working. for me it appears that most DSL chipsets keeps FastPath/G.inp enabled, but only certain ones are suitable to re-enable a service and/or the firmware also ? DrayTek 130 = Lantiq (VR9) Fritz!Box 3490 = Lantiq (VRX288) https://openwrt.org/docs/techref/hardware/soc/soc.lantiq
Was thinking about this, that vigor don’t want to enable g.inp, do you know which modem code was used (there is two to choose), if you set default, modem could use one which is not suitable for g.inp.
You need to login in order to vote