Reply To: GT-AX11000 LAN Flooding with 4K UHD iPTV Stream – Solved Running a GT-AX11000 with a Draytek Vigor 130 on a BT 80/20 FTTC connection. Have solved the dreaded IP6023 issue with some tweaking of the Draytek settings. Now have a…

[Mharv]

Six wrote:

Have solved the issue after a lot of work and swapping of kit and cables. An extremely frustrating process full of false hope as the 4K picture settles then degrades again. Tried every setting under the sun on the router. Jumped technology with the Powerline setup from 1200Mbps AV2 to 2400Mbps G.hn. Tried various new Cat 6 and 7 cables to rule out local interference. Double and triple checked the Draytek settings although tbh there was nothing to change once in bridge mode. Yes it was running latest BT firmware. Then as a last gasp I swapped out the Draytek for a BT HG612 and hey presto, rock solid picture. Looking at the traffic monitor somehow the multicast traffic was doubling and also spiking even higher when using the Draytek.

Are you running 384 firmware for DT 130 and check your pass through mode on Internet Access>MP0A/Static or Dynamic IP> check at bottom Bridge Mode Box is Ticked.

In my router AC86U under LAN>IPTV> Microsoft and Enable multicast routing (IGMP Proxy) Enabled.  No other setting used.  4k streaming IPTV Netflix and Prime Video and BT Sports all work fine.  (I too had to reuse my old BT OR modem to check which worked.) is you TV Smart and have WiFi to setup… and not use the wifi plugins… also my dratek 130 is on my router for stats… via its own web browser.  I have used dsl 68u and dsl 88u, the latter would not work IPTV unless i changed the QOPS and set upload to 18mb/s to get a picture but then WiFi on both channels would not work… also echo alexa would only work on channel 36, but now they find their own channels.. weird right… really like the 68u and the 86u is so much better.

You need to login in order to vote