Thanks, The configuration used is
WWW > Plusnet Router (Wifi Disabled) > XT8 router > 2 x XT8 mesh nodes
Screen shots of the config attached. The main network has most of the connections with two devices connected to a 2.4GHz SSID for IoT devices that cause problems. The smartplug needed the Mesh disabled which is fine given the location/bandwidth of the devices that do not move.
The devices I bought were from here but there are plenty of other smart plugs using the same Tasmota software on UP111 hardware. It would be good if owners of smarrt devices didn’t have to debug this problem with the Asus devices.
Attachments:
You need to login in order to vote