Reply To: ASUS ZenWiFi AX Whole Home Tri-Band Mesh WiFi 6 System Not sure if this is the right place to ask…. I am thinking of upgrading my Google Mesh wifi to the above. Has anyone used this and does it…

[dodgydrains]

Interference Level: Acceptable
Mode : AP Only

DFS status: state IDLE time elapsed 0ms radar channel cleared by DFS none

Channel Information
—————————————-
Channel 36 A Band
Channel 40 A Band
Channel 44 A Band
Channel 48 A Band
Channel 52 A Band, RADAR Sensitive, Passive
Channel 56 A Band, RADAR Sensitive, Passive
Channel 60 A Band, RADAR Sensitive, Passive
Channel 64 A Band, RADAR Sensitive, Passive

Stations List
—————————————-
idx MAC Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
AA:45:C4:F8:E3:8A Yes Yes -69dBm ac Yes Yes Yes Yes 1 80M 325M 6M 00:08:12
44:E4:EE:77:DA:5A Yes Yes -40dBm n No Yes No No 1 40M 150M 135M 34:40:54

SSID: “Home-Mesh 5G-2”
noise: -87 dBm Channel: 100/160
BSSID: FC:34:97:9B:0B:08 Capability: ESS RRM
Supported Rates: [ 6(b) 9 12 18 24(b) 36 48 54 ]
HE Capable:
Chanspec: 5GHz channel 114 160MHz (0xe872)
Primary channel: 100
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-31
Supported VHT MCS:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
NSS4 Tx: 0-11 Rx: 0-11
Supported HE MCS:
80 Mhz:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
NSS4 Tx: 0-11 Rx: 0-11
160 Mhz:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
NSS4 Tx: 0-11 Rx: 0-11

Interference Level: Acceptable
Mode : AP Only

DFS status: state In-Service Monitoring(ISM) time elapsed 24432900ms radar channel cleared by DFS channel 100/160 (0xE872)

Channel Information
—————————————-
Channel 100 A Band, RADAR Sensitive
Channel 104 A Band, RADAR Sensitive
Channel 108 A Band, RADAR Sensitive
Channel 112 A Band, RADAR Sensitive
Channel 116 A Band, RADAR Sensitive
Channel 120 A Band, RADAR Sensitive
Channel 124 A Band, RADAR Sensitive
Channel 128 A Band, RADAR Sensitive
Channel 132 A Band, RADAR Sensitive, Passive
Channel 136 A Band, RADAR Sensitive, Passive
Channel 140 A Band, RADAR Sensitive, Passive

In terms of my wireless backhaul, under the AiMesh tab, it initially showed the mesh connecting at 2.4GHz ‘uplink-type’.  After 5-10 minutes all the nodes changed to 5GHz with connection quality ‘Great’ and various ‘PHY rate’.

Node 1: Transmit rate 2882.3 Mbps, Receive rate 2882.3 Mbps

Node 2: Transmit rate 2041.7 Mbps, Receive rate 2450 Mbps

Node 3: Transmit rate 1945.6 Mbps, Receive rate 2041.7 Mbps

It has remained at Channel: 100/160 for 1 day 11 hours.  I am living near central London, if that helps.

Liked by:

You need to login in order to vote