The engineer has been today and has reset the Dlm.
What I didn’t know is after his last visit a week ago he had put the downstream snr up from 3 to 6 and I guess that’s why my speeds dropped from an average of about 63 down to the low 50s sometime lower.
He’s put the snr back down to 3 and also changed the ports for the connection in the cabinet.
With the Dlm reset should my speeds have jumped right back up to 80 even if I’m not lucky enough for it to stay that high?
My speeds are still sitting in the 50s for now,I also showed him the modem line stats and he noticed the fec and crc errors which when he tested the line himself fro 15 ins it showed no crc and only a very small amount of fec errors.
The download is back to interleaved which I’m guessing will change and is because of the Dlm reset?
I’ll post up vdsl status since the dlm.
I’ve meant to ask in previous posts about a setting I changed which lets you view the modem login and set up pages when you type the ip address,special requirement from isp.
The settting is Enable VPN + DHCP Connection I’ve set it to on and now I can use my browser to view the Vigor log in,although the detailed line stats are via telnet cmd is this ok to leave on and won’t affect my line speed etc?
I’ve also seen on another forum you can now get merlin custom firmware for dsl routers including mine,do any of you guys use custom firmware for a dsl router?
And is it ok to upgrade now or wait for the dsm settling period,sorry for all the questions but as I’ve stated before I’m a complete noob at this.
Attachments:
You need to login in order to vote