@UKTechHub

💫 UKTechHub

UK Tech Forums

.
.

NETGEAR routers that support DHCP option 60 and 61

› UKTH forums › 🛜 Wireless Routers & Modems › 💬 NetGear & Wireless › NETGEAR routers that support DHCP option 60 and 61

Viewing 1 post (of 1 total)
  • Author
    Posts
  • June 10, 2025 at 7:42 pm #37981
    UK SentinelUK Sentinel
    Moderator
    • Replies 7,999
    • The Skipper

    Some Internet service providers (ISPs) require you to configure DHCP option 60 and 61 on your router in order for your router to work with your ISP modem, these include Sky.

    DHCP option 60 is the vendor class identifier string. DHCP option 61 is the client identifier string. Your ISP provides this information. If your ISP did not provide information about option 60 or 61, contact your ISP.

    The following NETGEAR routers support DHCP option 60 and 61:

     

    Below table taken directly from Netgear (03/11/2021)

    ProductFirmware version
    R9000V1.0.4.28 and above
    RBK50V2.5.0.22 and above
    RBK13V2.5.0.22 and above
    R7800V1.0.2.64 and above
    XR500V2.3.2.56 and above
    XR700V1.0.1.10 and above
    RAX40V1.0.3.62 and above
    RAX80V1.0.3.88 and above
    RAX200V1.0.1.12 and above
    D62201.0.0.16 and above
    D6400V1.0.0.38 and above
    D7000V2V1.0.0.38 and above

    https://kb.netgear.com/000062426/Which-NETGEAR-routers-support-DHCP-option-60-and-61

    Share the knowledge

    In a completely sane world, madness is the only freedom (J.G.Ballard).

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.