[Ivan Singleton]

This seems to be newer (3.0.0.6.102_36564) than the one that was pulled.  On the download page it has 9.0.0.6.102_36564 as the id number, but once it is installed has the production build number.  I’m assuming as are other folks that it is a QA build and will be pushed live after final tests, but not sure.  I never know what to expect from Asus, just kind of go with the flow.  It was posted to the Asus Web Storage download on the 20th of March.

1

Share

• This reply was modified 1 year, 2 months ago by Ivan Singleton.

Main Router: 1 x RT-BE96U merlin FW running 3006.102.3 with 2GB Swap
aiMesh Nodes: 3 x Zenwifi ET12 Pro running Stock 3.0.0.6.102_36564
AddOns: AMTM 5.2.1, Skynet 7.6.4, Diversion 5.4.4, scMerlin 2.5.10, MerlinAU 1.4.2, uDivstats 4.0.9, BACKUPMON 1.8.22

Liked by:

You need to login in order to vote

[Ivan Singleton]

I installed this build from the link posted on SNB and my ET12 mesh is running super solid!  There is NO VLAN support (port assigning) as earlier confirmed, but Guest Network Pro is working with my be96U main router!  It is a huge step up from the last beta 9.0.0.6.102.4856 aside from no longer being able to assign vlans to ports.

https://www.snbforums.com/threads/asus-zenwifi-pro-et12-firmware-version-3-0-0-6-102_36382-2025-03-12.94094/#post-949068

Main Router: 1 x RT-BE96U merlin FW running 3006.102.3 with 2GB Swap
aiMesh Nodes: 3 x Zenwifi ET12 Pro running Stock 3.0.0.6.102_36564
AddOns: AMTM 5.2.1, Skynet 7.6.4, Diversion 5.4.4, scMerlin 2.5.10, MerlinAU 1.4.2, uDivstats 4.0.9, BACKUPMON 1.8.22

You need to login in order to vote

[Ivan Singleton]

Looks like Asus pulled the build.  It’s no longer available, or never really was in the first place.

1

Share

Main Router: 1 x RT-BE96U merlin FW running 3006.102.3 with 2GB Swap
aiMesh Nodes: 3 x Zenwifi ET12 Pro running Stock 3.0.0.6.102_36564
AddOns: AMTM 5.2.1, Skynet 7.6.4, Diversion 5.4.4, scMerlin 2.5.10, MerlinAU 1.4.2, uDivstats 4.0.9, BACKUPMON 1.8.22

You need to login in order to vote

[Ivan Singleton]

For clarity the Zenwifi ET12 isn’t a wifi 7 device it is wifi 6e.  Hope you were able to find the wifi disable.  What mesh are you running behind?  I have 3 ET12 aimesh nodes behind my be96u and they seem to run really well.

Main Router: 1 x RT-BE96U merlin FW running 3006.102.3 with 2GB Swap
aiMesh Nodes: 3 x Zenwifi ET12 Pro running Stock 3.0.0.6.102_36564
AddOns: AMTM 5.2.1, Skynet 7.6.4, Diversion 5.4.4, scMerlin 2.5.10, MerlinAU 1.4.2, uDivstats 4.0.9, BACKUPMON 1.8.22

Liked by:

You need to login in order to vote

[Ivan Singleton]

I can confirm the VLAN statement.  I bought a BE96u as a main router for my 3 ET12’s nodes.  With the latest version of 388 my iot devices just pull an ip address from the main dhcp pool.  When I down/up graded to the 9.0.0.6.102 beta version for the ET12’s, the vlans worked.  It seems stable enough at this point to work with until the 3.0.0.6 comes out for the ET12’s.  I’m running about 120 hosts across the IoT and main network.

Main Router: 1 x RT-BE96U merlin FW running 3006.102.3 with 2GB Swap
aiMesh Nodes: 3 x Zenwifi ET12 Pro running Stock 3.0.0.6.102_36564
AddOns: AMTM 5.2.1, Skynet 7.6.4, Diversion 5.4.4, scMerlin 2.5.10, MerlinAU 1.4.2, uDivstats 4.0.9, BACKUPMON 1.8.22

Liked by:

You need to login in order to vote

[Author]

Posts