UK Tech Forums
Ok all the suggested settings were already set at the time of updating firmware. The only additional setting i added now is the turning off of WMM APSD. Hope that tweak helps.
also, my node isn’t really far from the main router, yes it’s on the second floor but i can still see the main router if i stand beside the node upstairs (around 10-15meters apart). And i consistently get -41 rssi (great) signal whenever i check from the app.
Adding some screenshots of my settings:
https://mega.nz/file/YZBB2b6S#q4kHT6kY4Qn8PCkltdpAwwIMaNI9HMlyTG6lWBqyCJI
https://mega.nz/file/YZBB2b6S#q4kHT6kY4Qn8PCkltdpAwwIMaNI9HMlyTG6lWBqyCJI
https://mega.nz/file/YZBB2b6S#q4kHT6kY4Qn8PCkltdpAwwIMaNI9HMlyTG6lWBqyCJI
You need to login in order to vote
Yes that’s how i set it up once i updated to the latest firmware. 80ghz, unchecked auto select including dfs and unchecked enable 160ghz.
You need to login in order to vote
6 days after hopping into the latest firmware and trying out suggested settings, my node reverted back to ‘weak’ 2.4g wireless backhaul. Bummer. Ever since purchasing this xt8, my longest run w/o reverting to 2.4g wireless backhaul is 8days uptime. So frustrating. Starting to get ‘buyers remorse’ now with this device. It’s so powerful and yet clunky.
You need to login in order to vote
Nice. I have an option to use 160mhz solo too? Great! If this current 80mhz setup fails, i’ll try your suggestion. Thanks a lot!
You need to login in order to vote
So sorry for the mix up. Yes, it’s Asus zenwifi AX XT8.
Oh ok, so instead of selecting 20,40,80mhz. I just choose 80mhz only? Also unclick auto channel dfs?
thanks a lot! Will try these! More power to you! Great help!
You need to login in order to vote
Hi guys! Been having trouble with my ATX8 wireless backhaul reverting to 2.4ghz (weak signal). After backreading alot here, may i know if the consensus here to avoid backhaul slowdown is to set 5ghz2 settings to:
hide ssid: yes
wireless mode: ax only
wifi6: enabled
Channel bandwidth: 20/40/80mhz
Control channel: Auto
clicked selected: auto channel including DFS
Is this correct? Yes?
I updated to 22525 a couple weeks back but after a few days, node beacame useless as it reverted to 2.4ghz even if I specifically set backhaul as 5ghz2 on the app. Hope the setup above will cure the common and annying weak signal due to recerting the backhaul from 5ghz2 to 2.4ghz.
thanks in advance!
You need to login in order to vote
