Forum Replies Created
-
AuthorPosts
-
Hello
Bad news for the new DSL-AC88U-B – with new stable firmware, both – HW acceleration and Ai Security not work properly all together. I have also my older router DSL-AC68U, there is speed with Ai Security setup “on” preserved and all the possible bandwidth is utilized. All types of download.
My test with the DSL-AC88U-B FW 1.10.06_Build585
bittorrent download over 50Mbps/5Mbps VDSL line:
————————————————
4.8-5MBps – AiProtection off, auto QoS off (one LAN host with RJ45 connection) – met my expectations
50kBps – AiProtection on, auto QoS on (one LAN host with RJ45 connection) – unusable for multimediaTo enjoy full speed I had to turn AiSecurity off. Again.
Hope it helps for the FW investigation.
But many thanks for https, it works fine.Wishlist: same functionality as DSL-AC68U plus new profiles, aimesh, WPA3 ready
Pavel
You need to login in order to vote
https://www.asus.com/ae-en/Networking/DSL-AC88U-Annex-B/HelpDesk_BIOS/
New firmware out:
Version 1.10.06_Build585 2018/11/0933.33 MBytesASUS DSL-AC88U Annex B Firmware version 1.10.06-Build585 (This product supports Annex B)
Release note:
– Fixed memory leak issue.
– xDSL Datapump updated: B2pvfbH043q. Fixed various xDSL issues.
– xDSL Driver updated: A2x027b. Fixed various xDSL issues.
– Added 35b support for VDSL Profile > Multi-mode.
– Fixed system DHCP server related issues.
– Adopt Broadcom BSP Patch5 changes.
– Fixed MDNS Multicast issues.
– Fixed AiProtection related issues.
– Fixed PS3/PS4 PPPoE pass-through issue when the WAN interface has no VLAN tag.
– Now Web UI support HTTPS option(Administration > System).
– Added “-R” option to start minidlna, force minidlna reparse USB content.
– Fixed always show alert message after finish restoring Setting file issue.
– Fixed Network Services under Firewall does not work properly issue.
– Fixed issue show incorrect message “Signature Version”.
– Fixed Web History related issues.
– Fixed the issue of firewall is not properly working by default.
– Web access from WAN, removed HTTP option, for security concern.
– Exclude G.fast capability in Auto-Sync mode for DSL modulation and removed some driver bits, for ADSL2+ compatibility.Please unzip the firmware file first then check the MD5 code.
MD5: 67a0ecd7d9136e2fe69ef012602d80a4You need to login in order to vote
Hi Sentinel,
please, have you any news about Annex B firmware? Pavel.
You need to login in order to vote
Hi Damis, the same problem.
I have also the DSL-AC68U – it adopts profiles: -8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a. In O2 CZ network worked this box for me fine till 50/5 VDSL rate (17a profile). I tried switch to 100/10 VDSL with autosync on, but without effort. Many restarts with all possible setup fallowed. Nothing worked. Then I ordered O2 for rollback to 50/5 Mbps and 17a.
Next day I found in the O2 offer very well promoted box “O2 Smart-BOX”. O2 CZ, of course, push it to customers with high pressure for 100/10 and 250/20 VDSL contracts (They have here add. money from IoT services, etc.) I read the tech. spec. and there are profiles ……, 17a, 35b ! What surprise: Profile 17a doesn’t work on 68U and 30a is missing on “O2 Smart Box”! So next I confirmed the speeds 50+ in Czech Republic probably use the 35b profile. Don’t know, tech. or politics.
So as I described , In Czech Republic you will need probably new dsl-modem-router with 35b profile for upgrade from 50 to 100 Mbps VDSL. Annex B, of course. I know nothing about Germany.
Hope it helps
Regards
Pavel
You need to login in order to vote
Thank you Sentinel, this is good advice. Hopefully Asus will publish it without delay. Regards PP
You need to login in order to vote
-
AuthorPosts