Reply To: Netgear DM200 Enable Telnet Command For anyone who own the Netgear DM200 modem, to enable Telnet enter the following URL. http://192.168.5.1/debug_detail.htm In a completely sane world, madness is the only freedom (J.G.Ballard).

[UK Sentinel]

To factory reset the Netgear DM200 Modem

DM200 Factory Reset Instructions:

1. On the back of the modem, locate the recessed Reset button above the yellow LAN port.
2. Using a straightened paper clip, press and hold the Reset button for at least five seconds.
3. Release the Reset button.
4. The Power LED starts blinking amber and the configuration is reset to factory default settings. When the reset is complete, the modem reboots. This process takes about two minutes.

 

https://factory-reset.com/wiki/DM200

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote