Netgear DM200 Enable Telnet Command

Home Forums Wireless Routers & Modems … NetGear & Wireless Netgear DM200 Enable Telnet Command

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #14844
    UK Sentinel
    Moderator
    • Posts 3645
    • Skipper

    For anyone who own the Netgear DM200 modem, to enable Telnet enter the following URL.

    http://192.168.5.1/debug_detail.htm

    In a completely sane world, madness is the only freedom (J.G.Ballard).

    #14845
    UK Sentinel
    Moderator
    • Posts 3645
    • Skipper

    To factory reset the Netgear DM200 Modem

    DM200 Factory Reset Instructions:

    1. On the back of the modem, locate the recessed Reset button above the yellow LAN port.
    2. Using a straightened paper clip, press and hold the Reset button for at least five seconds.
    3. Release the Reset button.
    4. The Power LED starts blinking amber and the configuration is reset to factory default settings. When the reset is complete, the modem reboots. This process takes about two minutes.

     

    https://factory-reset.com/wiki/DM200

    In a completely sane world, madness is the only freedom (J.G.Ballard).

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.