› UKTH forums › 🛜 Wireless Routers & Modems › ASUS & Wireless › Converting DSL-AC68U to RT-AC68U for use as AiMesh Node – Solved I’m sure there were a series of posts on the old forum about hacking a DSL-AC68U to make it into an RT-AC68U. Sadly those posts are lost and not cached... › Reply To: Converting DSL-AC68U to RT-AC68U for use as AiMesh Node – Solved I’m sure there were a series of posts on the old forum about hacking a DSL-AC68U to make it into an RT-AC68U. Sadly those posts are lost and not cached…
OK can you try a couple more things before making any of the above changes.
Power down the router, hold the WPS button in, power up, wait 5 -10 seconds and then release WPS button. Allow to boot and check if weird setting are still there.
If that fails to get rid of them, then enable telnet, open a terminal connection, login and enter the command mtd-erase2 nvram. It is important that you power down the router immediately after doing this. Do not do anything else, especially a soft reboot. Power back on. Then again check to see if your weird settings are still there.
You need to login in order to vote