› UKTH forums › 🛜 Wireless Routers & Modems › ASUS & Wireless › Converting DSL-AC68U to RT-AC68U for use as AiMesh Node – Solved I’m sure there were a series of posts on the old forum about hacking a DSL-AC68U to make it into an RT-AC68U. Sadly those posts are lost and not cached... › Reply To: Converting DSL-AC68U to RT-AC68U for use as AiMesh Node – Solved I’m sure there were a series of posts on the old forum about hacking a DSL-AC68U to make it into an RT-AC68U. Sadly those posts are lost and not cached…
Thanks, Hopefully the overheating did not cause to much damage, I will ask ASUS for another link for the firmware and then try flashing (recovery) two or three times and in between, clear the NVRAM a couple of times and then just flash again with UI with recovery firmware, sounds a little long winded, but worked also for others.
If you flashed with GNUTON, then hopefully this was just a bad flash and not poor firmware build ?
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote