RT-AC86U 384.16 Hi, I updated to the latest Merlin firmware this morning (about 9 am) and since doing so my NE CRC count has gone up to 326598 over 5 hours. ...

[UK Sentinel]

Bitswap Near End is Off, run the Telnet command again to get it back On

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[Bully]

Should i leave it off as my FEC errors seem to have dropped?

 

I cant seem to add images from Imgur using BB codes?

You need to login in order to vote

[Mrk26]

Don’t turn on bitswap by telnet. Wait, they will turn on automatically.

You need to login in order to vote

[UK Sentinel]

Images are limited to 1Mb – try for a while leaving it Off, just incase that works, but I would assume your CRC will increase ?

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[Bully]

Does the below mean 0 = on as default?

bitswap      [US] =      1, [DS] =      1.
[0: default(ON), 1: ON, 2: OFF]

You need to login in order to vote

[UK Sentinel]

Mrk26 wrote:

Don’t turn on bitswap by telnet. Wait, they will turn on automatically.

Does that take 4 hours for Bitswap to be enabled ?

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[Mrk26]

Within 2h max 3h should be on. I realised that telnet adjustment on vigor may cause issues.

You need to login in order to vote

[UK Sentinel]

Mrk26 wrote:

Within 2h max 3h should be on. I realised that telnet adjustment on vigor may cause issues.

@bully modem has been on for 4 hours and Bitswap was Off for Near End – hence recommendation to enable via Telnet ?

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[Bully]

Been on from 10am, so approx 5 hrs

You need to login in order to vote

[Bully]

Blue wires to living room phone.

You need to login in order to vote

[UK Sentinel]

Bully wrote:

Does the below mean 0 = on as default? bitswap [US] = 1, [DS] = 1. [0: default(ON), 1: ON, 2: OFF]

I believe so

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[UK Sentinel]

@Bully – I will drop out of this conversation for a while as @Mrk26 and I must be driving you mad with our different advice.

Hope all goes well as I have a Sunday roast to prepare 

In a completely sane world, madness is the only freedom (J.G.Ballard).

Liked by:

You need to login in order to vote

[Mrk26]

@bully

Do you have anything connected to back of faceplate?

Also how heavy you use internet now. It’s really strange that bitswap didn’t turn on on downstream.

@Uk Sentinel

Aaaaa Sunday roast 🤤

In generally if bits don’t swap then “bitswap” is not activated.

Couple of speed test or heavy usage should help to turn them on “naturally” (as per my experience).

You need to login in order to vote

[Bully]

Nope, nothing connected to back of face plate.  So if i am correct, the blue wires to the living room are filtered?

You need to login in order to vote

[Mrk26]

Yes, these are filtered, so basically shouldn’t cause issues….

And actually you socket is later edition so shouldn’t be issues with it…

You need to login in order to vote

[Author]

Posts