Forum Replies Created
-
Sorry, but this is just a forum and no need for maximum security in my opinion.
As I wont use 2FA I would leave here, no problem, just for consideration.Login at bottom of threads I could live with as Firefox autofilled it and has been only one click.
If I need to login daily at login-mask and then search thread again for posting would be to troublesome for me.Liked by:
You need to login in order to vote
At least there ist login-button at the end of a thread again, so not really a problem right now.
Till yesterday it has gone an we needed to use login, after that you ended on a different page.I can only say, that in all other large forums which I use, I never have to login, even after browser restart they remain logged in.
Liked by:
You need to login in order to vote
For now there is a small bugfix release for these 2 boxes.
OS 7.56 final released for Fritz!Box 7530: https://download.avm.de/fritzbox/fritzbox-7530/other/
OS 7.56 final released for Fritz!Box 7590: https://download.avm.de/fritzbox/fritzbox-7590/other/# Further Improvements of FRITZ!OS 7.56
## System:
– **Fixed** “Transfer your settings to a new FRITZ!Box” was not visible in fritz.box / WizardsLiked by:
You need to login in order to vote
To be more clearly it should be reactivate instead of activate.
OME are preactivatet already.Liked by:
You need to login in order to vote
OS 7.55 final released for Fritz!Box 7530: https://download.avm.de/fritzbox/fritzbox-7530/other/
OS 7.55 final released for Fritz!Box 7590: https://download.avm.de/fritzbox/fritzbox-7590/other/# New functions of FRITZ!OS 7.55
## System:
– **NEW** In the new energy-saving mode, Wi-Fi, LAN and USB use even less power for slightly reduced performance
– **NEW** New wizard transfers all important Internet, telephony, and WLAN settings as well as connections to mesh, telephony, and smart home devices to a new FRITZ!Box <for more, see [7]># Further Improvements of FRITZ!OS 7.55
## Internet:
– **Improved** Clarified wording when configuring WireGuard VPN connections
– **Improved** NTP interoperability improved through better estimation of the hardware clock’s deviation
– **Improved** Optimization of bandwidth reservation in the home network through adjustment to transmitted downstream rate
– **Improved** Optimized switching from public DSN servers to provider-side DNS servers
– **Improved** The setting to send all IPv4 data traffic of the FRITZ!Box via the WireGuard VPN connection to (!) a single device is no longer supported
– **Fixed** “Reserve bandwidth in the home network” did not work with IPv6
– **Fixed** During preparation of the first WireGuard connection via remote dial-in the FRITZ!Box ended up in permanent wait mode
– **Fixed** In certain scenarios, switching the type of internet connection led to the WAN interface being switched to LAN
– **Fixed** Interoperability of IPSec VPN connections to LANCOM remote sites including usage of VNC and RDP with active packet acceleration not available
– **Fixed** MyFRITZ! access permission (device sharing) could sometimes only be terminated via IPv4
– **Fixed** Occasionally an IPv6 prefix sharing of a previous “outdated” prefix for a downstream router was not deleted
– **Fixed** On DS Lite connections, switching off IPv6 manually (incorrect configuration) could result in repeated dial-in attempts by the FRITZ!Box
– **Fixed** On TIM connections (Telecom Italia), configuration of a WireGuard connection led to repeated clearing of the internet connection
– **Fixed** Parental controls: Tickets for devices with the standard profile could not be redeemed
– **Fixed** Problems with functionality and/or display of the parental controls in certain application scenarios
– **Fixed** Repeaters sometimes used external NTP servers for initial time determination even if the upstreamFRITZ!Box offered an NTP server
– **Fixed** Under certain circumstances a switch to public DNS servers occurred although the current DNS server could be reached
– **Fixed** Under certain circumstances a switch to public DNS servers took place too early
– **Fixed** VPN: When configuring an IPSec-LAN-LAN connection, the address of the FRITZ!Box was not proposed
– **Fixed** When all IPv4 data traffic was routed over a WireGuard VPN connection, incoming calls were not always signaled
– **Fixed** When packet acceleration was enabled during longer LAN-LAN linkups to CISCO remote sites via IPSec, occasional connection losses occurred## Wi-Fi:
– **Fixed** Mesh Repeater operating mode: The “Select Wi-Fi Network” list did not display invalid Wi-Fi network names (SSID)## Mesh:
– **Fixed** After changing the connection of a repeater, the connection display on the “Home Network > Mesh” page of the user interface was wrong
– **Fixed** When using certain powerline adapters together with a network switch, the connection display on the “Home Network > Mesh” page of the user interface was wrong## Telephony:
– **Improved** Robuster handling of inconsistent data in Apple telephone contacts
– **Improved** Support for using up to 10 individual telephone numbers (MSNs) with the “Telekom CompanyFlex” rate
– **Change** Outdated entries removed from the list of telephone providers## DECT:
– **Improved** Support for DECT headsets from the Sennheiser EPOS series for outgoing calls and picking up calls via the headset button## Home Network:
– **Fixed** Devices with a dot in their name could no longer be renamed
– **Fixed** Display for search for updates for devices in the Mesh was not suitable in certain cases
– **Fixed** Possibly lacking rendering of IP addresses could cause subsequent defects## System:
– **Fixed** “Change notice” push service sent too often information on supposedly new port sharing
– **Fixed** Repeater events were occasionally listed twice in the Event Log
– **Fixed** There were too many events on changed settings in the Event Log## Mobile Network:
– **Improved** Internet connection with username/password supported for Alcatel IK41VE1 IoT/M2M 4G (MBIM) mobile network dongle## USB:
– **Fixed** No network drive function (SMB) could be established to Rclone
– **Fixed** WebDAV online storage could not be used when the country was set to “Spain”————————————————————
Liked by:
You need to login in order to vote
We have some funny german explanations for FIAT (like FORD=fix or repair daily).
For Italians Adequate Technique
Failure In Italian Automotive
Fehler in allen Teilen = failure in all parts
Fehler ist aber teuer = but failure are expensive
Fahr immer am Tag = drive always with daylight (because at night service stations are closed)Main problems we saw in the past that their cars are built for warm mediterranean (italian) climate and not for wet and cold weather with strong winters in the alps.
Liked by:
You need to login in order to vote
You have about 40% overhead over WiFi, so what faster would you asume with max-link apeed 1200Mb/s?
Liked by:
You need to login in order to vote
Why dont you keep it simple and use an ax-Repeater with LAN-Ports?
So you are connected with this subnet to specific WLAN and you can use wired or wireless devices behind in their own clowd.
You even need less devices to be managed seperately.Of course, that wont be that challenging …
Liked by:
You need to login in order to vote
FWIW: On AVM modems/routers you can set one LAN-port to guest-WiFi, but they miss VLAN support.
Liked by:
You need to login in order to vote
