@UKTechHub

UKTechHub

UK Tech Forums

PayPal-Donate button
.
.

kamiboy

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 30 total)
1 2
  • Author
    Posts
  • October 12, 2019 at 9:32 pm in reply to: ASUS DSL-N16 issue with wifi show me password is incorrect Hello.my asus dsl-n16 has issue with wifi. some times wifi connection drop and i can’t connect to wifi . also i notice that FREE RAM IS ONLY 3 MB!! IS... #4784
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    I have seen from other users the DSL-N16 is using a high amount of RAM, I am sure the usage should not be that high, does the RAM usage ever increase to 58MB ? Wifi password is interesting, is this 2.4Ghz and is this only with certain wifi clients, what length password are you using currently ? Try changing wifi control channel to 3 or 7 ?

    ram usage increase during times right after reboot free RAM was 22MB.modem uptime was more than 3 days.but you are correct it should not be that high and asus firmware has bug/glitch.

    wifi band is 2.4 GHz and all client lost wifi connection and internet connection, also i was not able to open modem setup page (192.168.1.1) via wifi. password length is 13 characters.

    i’ll try to change wifi channel and see if problem happen again.

     

     

    Attachments:

    1. 2019-10-12-19_59_15-Microsoft-Edge.png

    October 8, 2019 at 4:47 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4736
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    @kamiboy – I have spoken with ASUS and they will look at the VPN (L2TP) issue next week, I am told there is a national holiday at some point this week over in Taiwan. Could you send feedback again and include in comments box you have spoken with ‘UK Sentinel’ at beginning of text, so they can easily find feedback submission

    thank you ,i sent feedback to ASUS and mention you in the comment section.

     

     

    Attachments:

    1. 2019-10-08-19_13_59-Window.png

    October 3, 2019 at 4:07 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4674
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    @kamiboy – I have spoken with ASUS this morning and they say they believe there are no issues with DSL-N16 and L2TP – ASUS have asked if you could do the following via a mobile device (to test) ———– It seems user is attempting to connect to DE L2TP server, can user set up this VPN account on phone(user phone’s VPN Client instead) and connect to that server through DSL-N16? Perhaps indeed local ISP blocked it. ———– UK Sentinel

    hello dear,i am able to connect to DE server with my iphone and it has no problem .also vpn client in asus dsl-n16 modem-router is disable

     

    Attachments:

    1. IMG_0006.png

    2. IMG_0005.png

    October 2, 2019 at 1:35 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4653
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    kamiboy wrote:
    UK Sentinel wrote:

    I agree, something does not seem correct, did you ever have another router and did L2TP VPN work with other router ?

    i have another router but it doesn’t support vpn client. as you can see with PPTP protocol it has no issue and modem uptime is more than 15 hours …

     

    also did ASUS reply to your feedback? please ask them to release a new beta update and address this issue

    October 2, 2019 at 1:31 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4650
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    I agree, something does not seem correct, did you ever have another router and did L2TP VPN work with other router ?

    i have another router but it doesn’t support vpn client. as you can see with PPTP protocol it has no issue and modem uptime is more than 15 hours …

     

     

    Attachments:

    1. 2019-10-02-15_57_41-Window.png

    2. 2019-10-02-15_55_52-.png

    October 1, 2019 at 3:09 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4645
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    I have already mentioned this issue to ASUS yesterday and am awaiting a response, Which L2TP service do you use ? screen dump with username /password hidden would be good ?

    no matter what vpn service i use it has problem with all vpn services .i tested different vpn services with l2tp protocol all have rebooting issue .currently i use seed4me vpn .

     

     

    Attachments:

    1. 2019-10-01-17_34_22-Window.png

    2. 2019-10-01-17_34_52-Window.png

    October 1, 2019 at 1:54 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4643
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    Understood, I think try Version 1.1.2.3_473 if this does not work, then we need to look at how you are setting up L2TP Is there any reason why you prefer L2TP, as this does not offer any encryption and do you only have the VPN Client set up (no VPN server) ?

    hello dear , i flashed oldest firmware available in asus website (1.1.2.3_473) and i did factory reset but the rebooting issue is not solved when i use l2tp vpn client .

    i setup l2tp vpn client with vpn server address, username and password then activate it . i use it because it is faster and the vpn service i use only support pptp and l2tp protocol.

    do you think asus is aware about this issue ?

    September 30, 2019 at 6:51 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4636
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    Did any of the DSL-N16 older firmware’s work before ?

    i don’t know when i bought this modem i was not aware about this issue and i updated modem to latest software .firmware version that came with modem was (1.1.1.2)..

    so far i tested these versions all have same issue and factory reset didn’t help :

    1. v1.1.2.3_743
    2. v1.1.2.3_674
    3. v9.1.2.3_783 (latest beta)

    which version you suggest me to test ?

     

    September 30, 2019 at 5:51 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4634
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    kamiboy wrote:
    UK Sentinel wrote:

    Ok, is the configuration new, maybe factory reset router and build manually, not from backup I notice in logs that there is a (dnsmasq[3367]: bad address at /etc/hosts line 2) but am surprised if this is causing the reboot ?

    i didn’t restore setting to default but i will try that and report back.

    after factory reset and setup modem as new the issue with l2tp vpn connection apears again …

     

    2011-01-01 00:00:45 syslogd started: BusyBox v1.00 (2019.09.06-08:28+0000)
    2011-01-01 00:00:46 WAN Connection: Wan link down.
    2011-01-01 00:00:46 stop_nat_rules: apply the redirect_rules!
    2011-01-01 00:00:49 kernel: [route_setting]remove interface[0]=[nas8_0]
    2011-01-01 00:00:49 kernel: Firmware version=[v9.1.2.3]
    2011-01-01 00:01:26 kernel: Link State: DSL link up.
    2011-01-01 00:01:27 kernel:
    2011-01-01 00:01:27 kernel: $s: go into unregister_mulif_device
    2011-01-01 00:01:27 kernel:
    2011-01-01 00:01:27 kernel: nas8_0: vifname = unregister_mulif_device
    2011-01-01 00:01:27 kernel: vdev is NULL
    2011-01-01 00:01:27 kernel: mt7510_config
    2011-01-01 00:01:27 RFC1483/2684 bridge: Interface “nas0” created sucessfully
    2011-01-01 00:01:27 RFC1483/2684 bridge: Communicating over ATM 0.0.33, encapsulation: LLC
    2011-01-01 00:01:28 kernel: mt7510_atm_open
    2011-01-01 00:01:28 kernel: vpi: 0
    2011-01-01 00:01:28 kernel: vci: 33
    2011-01-01 00:01:28 kernel: mt7510_atm_open vc 0:
    2011-01-01 00:01:28 kernel: ATM over ADSL mode init
    2011-01-01 00:01:28 kernel: dslUpRate: 1809
    2011-01-01 00:01:28 kernel: enter br2684_init_hook function
    2011-01-01 00:01:28 kernel: mt7510_init_MPOA
    2011-01-01 00:01:28 kernel: Init VC 0 MPOA Function
    2011-01-01 00:01:28 kernel: MPOA Mode: MODE_BRIDGE
    2011-01-01 00:01:28 kernel: MuxType: MUX_LLC
    2011-01-01 00:01:28 kernel: Mode: MODE_BRIDGE
    2011-01-01 00:01:28 kernel: br2684_init_hook: success
    2011-01-01 00:01:28 RFC1483/2684 bridge: Interface configured
    2011-01-01 00:01:28 RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started
    2011-01-01 00:01:29 syslog: Initialize LCP.
    2011-01-01 00:01:29 syslog: Plugin libpppoe.so loaded.
    2011-01-01 00:01:29 syslog: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
    2011-01-01 00:01:29 syslog: pppd 2.4.7 started by admin, uid 0
    2011-01-01 00:01:29 syslog: LCP is allowed to come up.
    2011-01-01 00:01:30 WAN Connection: Fail to connect with some issues.
    2011-01-01 00:01:59 kernel: Probe Service Type: PPPoE
    2011-01-01 00:01:59 kernel:
    2011-01-01 00:01:59 kernel: sys autopvc set mac 88 d7 f6 61 3e 60
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 0 0 32
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 1 0 33
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 2 0 34
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 3 0 35
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 4 0 38
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 5 0 40
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 6 0 50
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 7 0 59
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 8 0 66
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 9 0 67
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 10 0 100
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 11 1 32
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 12 1 33
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 13 1 34
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 14 1 35
    2011-01-01 00:01:59 kernel: sys autopvc set vcpool 15 1 50
    2011-01-01 00:02:00 kernel: sys autopvc probe vcpool
    2011-01-01 00:02:03 kernel: Probe Service Type: PPPoE
    2011-01-01 00:02:03 kernel:
    2011-01-01 00:02:03 kernel: sys autopvc set mac 88 d7 f6 61 3e 60
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 0 1 100
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 1 1 500
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 2 2 32
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 3 6 35
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 4 8 32
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 5 8 35
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 6 8 36
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 7 8 42
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 8 8 48
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 9 8 60
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 10 8 81
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 11 9 148
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 12 10 40
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 13 17 32
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 14 35 33
    2011-01-01 00:02:03 kernel: sys autopvc set vcpool 15 38 100
    2011-01-01 00:02:03 kernel: sys autopvc probe vcpool
    2011-01-01 00:02:04 syslog: Timeout waiting for PADO packets
    2011-01-01 00:02:04 syslog: Unable to complete PPPoE Discovery
    2011-01-01 00:02:04 syslog: LCP down.
    2011-01-01 00:02:07 kernel: Probe Service Type: PPPoE
    2011-01-01 00:02:07 kernel:
    2011-01-01 00:02:07 kernel: sys autopvc set mac 88 d7 f6 61 3e 60
    2011-01-01 00:02:07 kernel: sys autopvc set vcpool 0 130 32
    2011-01-01 00:02:07 kernel: sys autopvc probe vcpool
    2011-01-01 00:02:08 syslog: LCP is allowed to come up.
    2011-01-01 00:02:15 kernel: Probe Service Type: PPPoE
    2011-01-01 00:02:15 kernel:
    2011-01-01 00:02:15 kernel: sys autopvc set mac 88 d7 f6 61 3e 60
    2011-01-01 00:02:15 kernel: sys autopvc set vcpool 0 8 35
    2011-01-01 00:02:15 kernel: sys autopvc probe vcpool
    2011-01-01 00:02:23 kernel: Probe Service Type: PPPoA
    2011-01-01 00:02:23 kernel:
    2011-01-01 00:02:23 kernel: sys autopvc set mac 88 d7 f6 61 3e 60
    2011-01-01 00:02:23 kernel: sys autopvc set vcpool 0 0 32
    2011-01-01 00:02:23 kernel: sys autopvc set vcpool 1 0 35
    2011-01-01 00:02:23 kernel: sys autopvc set vcpool 2 0 38
    2011-01-01 00:02:23 kernel: sys autopvc set vcpool 3 0 100
    2011-01-01 00:02:23 kernel: sys autopvc set vcpool 4 1 33
    2011-01-01 00:02:23 kernel: sys autopvc set vcpool 5 1 50
    2011-01-01 00:02:23 kernel: sys autopvc set vcpool 6 8 35
    2011-01-01 00:02:23 kernel: sys autopvc set vcpool 7 8 48
    2011-01-01 00:02:23 kernel: sys autopvc set vcpool 8 35 33
    2011-01-01 00:02:24 kernel: sys autopvc probe vcpool
    2011-01-01 00:02:32 kernel: Probe Service Type: PPPoA
    2011-01-01 00:02:32 kernel:
    2011-01-01 00:02:32 kernel: sys autopvc set mac 88 d7 f6 61 3e 60
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 0 0 32
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 1 0 33
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 2 0 35
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 3 0 36
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 4 0 38
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 5 0 50
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 6 0 100
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 7 1 32
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 8 1 33
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 9 1 35
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 10 1 50
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 11 5 35
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 12 8 32
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 13 8 35
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 14 8 48
    2011-01-01 00:02:32 kernel: sys autopvc set vcpool 15 8 80
    2011-01-01 00:02:33 kernel: sys autopvc probe vcpool
    2011-01-01 00:02:36 kernel: Probe Service Type: PPPoA
    2011-01-01 00:02:36 kernel:
    2011-01-01 00:02:36 kernel: sys autopvc set mac 88 d7 f6 61 3e 60
    2011-01-01 00:02:36 kernel: sys autopvc probe vcpool
    2011-01-01 00:02:44 syslog: Timeout waiting for PADO packets
    2011-01-01 00:02:44 syslog: Unable to complete PPPoE Discovery
    2011-01-01 00:02:44 syslog: LCP down.
    2011-01-01 00:02:44 kernel: Probe Service Type: DHCP
    2011-01-01 00:02:44 kernel:
    2011-01-01 00:02:44 kernel: sys autopvc set mac 88 d7 f6 61 3e 60
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 0 0 32
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 1 0 33
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 2 0 34
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 3 0 35
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 4 0 37
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 5 0 44
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 6 0 96
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 7 0 100
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 8 0 101
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 9 1 32
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 10 1 40
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 11 1 101
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 12 8 32
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 13 8 35
    2011-01-01 00:02:44 kernel: sys autopvc set vcpool 14 8 36
    2011-01-01 00:02:45 kernel: sys autopvc probe vcpool
    2011-01-01 00:02:45 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 8
    2011-01-01 00:02:46 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 104
    2011-01-01 00:02:48 syslog: LCP is allowed to come up.
    2011-01-01 00:02:53 kernel: Probe Service Type: DHCP
    2011-01-01 00:02:53 kernel:
    2011-01-01 00:02:53 kernel: sys autopvc set mac 88 d7 f6 61 3e 60
    2011-01-01 00:02:53 kernel: sys autopvc set vcpool 0 0 40
    2011-01-01 00:02:53 kernel: sys autopvc set vcpool 1 8 32
    2011-01-01 00:02:53 kernel: sys autopvc set vcpool 2 8 35
    2011-01-01 00:02:53 kernel: sys autopvc probe vcpool
    2011-01-01 00:03:02 kernel: tc3162_atm_close done
    2011-01-01 00:03:02 kernel:
    2011-01-01 00:03:02 kernel: ==> check_mulif_interface_existnas0
    2011-01-01 00:03:02 kernel: ==> to find mulif group of device nas0
    2011-01-01 00:03:02 kernel: ==>mulif err, no find mulif group of device nas0
    2011-01-01 00:03:02 kernel: mt7510_config
    2011-01-01 00:03:02 RFC1483/2684 bridge: Interface “nas0” created sucessfully
    2011-01-01 00:03:02 RFC1483/2684 bridge: Communicating over ATM 0.0.33, encapsulation: LLC
    2011-01-01 00:03:02 kernel: mt7510_atm_open
    2011-01-01 00:03:02 kernel: vpi: 0
    2011-01-01 00:03:02 kernel: vci: 33
    2011-01-01 00:03:24 kernel: The test lab:255
    2011-01-01 00:03:24 kernel: SRAON
    2011-01-01 00:03:24 kernel: US bitswap on,DS bitswap on
    2011-01-01 00:03:24 kernel: OlrON
    2011-01-01 00:03:24 kernel: Set SNRM OFFSET = 0.0 db
    2011-01-01 00:03:24 kernel: Set Agc Vref1 = 65535 ; Vref2 = 65535 ; Vref3 = 65535
    2011-01-01 00:03:24 kernel: AGC Vref1 = 65535 ; Vref2 = 65535 ; Vref3 = 65535 ; Vref4 = 65535
    2011-01-01 00:03:24 kernel: Reset sync sym update to default value !!!
    2011-01-01 00:03:24 kernel: PROFILE30A_MULTI_MODE
    2011-01-01 00:03:24 kernel: G.inp mode
    2011-01-01 00:03:25 kernel: ANNEXAIJLM
    2011-01-01 00:03:25 kernel: annex auto-switch flag = 0
    2011-01-01 00:03:27 kernel: Link State: DSL link down.
    2011-01-01 00:03:36 syslog: Timeout waiting for PADO packets
    2011-01-01 00:03:36 syslog: Unable to complete PPPoE Discovery
    2011-01-01 00:03:36 syslog: LCP down.
    2011-01-01 00:03:37 WAN Connection: Wan link down.
    2011-01-01 00:03:40 syslog: LCP is allowed to come up.
    2011-01-01 00:04:12 WEB: Configuration changed: SysInfo_Entry
    2011-01-01 00:04:15 syslog: Timeout waiting for PADO packets
    2011-01-01 00:04:15 syslog: Unable to complete PPPoE Discovery
    2011-01-01 00:04:15 syslog: LCP down.
    2011-01-01 00:04:15 WEB: Configuration changed: Account_Entry0
    2011-01-01 00:04:15 WEB: Configuration changed: SysInfo_Entry
    2011-01-01 00:04:15 kernel:
    2011-01-01 00:04:15 kernel:
    2011-01-01 00:04:15 kernel: wlan_write—goto fopen!!WPSActiveStatus = NULL
    2011-01-01 00:04:15 kernel: WPSOOBActive = NULL
    2011-01-01 00:04:15 kernel: ReCounterActive = NULL
    2011-01-01 00:04:15 kernel: WPSGenPinCode = NULL
    2011-01-01 00:04:15 kernel: write_wlan_AutoChannelSkipList -(0x20)
    2011-01-01 00:04:15 kernel:
    2011-01-01 00:04:16 kernel: MTPciPollTxRxEmpty
    2011-01-01 00:04:16 kernel: AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0
    2011-01-01 00:04:16 kernel: RTMPSetPiggyBack(879): Not support for HIF_MT yet!
    2011-01-01 00:04:17 kernel: RT28xxPciAsicRadioOff(): Not support for HIF_MT yet!
    2011-01-01 00:04:17 kernel: tx_kickout_fail_count = 0
    2011-01-01 00:04:17 kernel: tx_timeout_fail_count = 0
    2011-01-01 00:04:17 kernel: rx_receive_fail_count = 0
    2011-01-01 00:04:17 kernel: alloc_cmd_msg = 241
    2011-01-01 00:04:17 kernel: free_cmd_msg = 241
    2011-01-01 00:04:17 kernel: br0: port 1(ra0) entering forwarding state
    2011-01-01 00:04:17 kernel: device ra0 left promiscuous mode
    2011-01-01 00:04:17 kernel: br0: port 1(ra0) entering disabled state
    2011-01-01 00:04:19 syslog: LCP is allowed to come up.
    2011-01-01 00:04:36 kernel: TX_BCN DESC a1bc0000 size = 320
    2011-01-01 00:04:36 kernel: RX[0] DESC a1bc2000 size = 2048
    2011-01-01 00:04:36 kernel: RX[1] DESC a1bc3000 size = 2048
    2011-01-01 00:04:36 kernel: cfg_mode=9
    2011-01-01 00:04:36 kernel: cfg_mode=9
    2011-01-01 00:04:36 kernel: wmode_band_equal(): Band Equal!
    2011-01-01 00:04:36 kernel: FW Version:CL173766-A
    2011-01-01 00:04:36 kernel: FW Build Date:20170925114906
    2011-01-01 00:04:36 kernel: AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
    2011-01-01 00:04:36 kernel: efuse_probe: efuse = 10000002
    2011-01-01 00:04:36 kernel: RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5
    2011-01-01 00:04:38 kernel: tc3162_atm_close done
    2011-01-01 00:04:38 kernel:
    2011-01-01 00:04:38 kernel: ==> check_mulif_interface_existnas0
    2011-01-01 00:04:38 kernel: ==> to find mulif group of device nas0
    2011-01-01 00:04:38 kernel: ==>mulif err, no find mulif group of device nas0
    2011-01-01 00:04:39 RFC1483/2684 bridge: Interface “nas0” created sucessfully
    2011-01-01 00:04:39 RFC1483/2684 bridge: Communicating over ATM 0.0.35, encapsulation: LLC
    2011-01-01 00:04:39 kernel: mt7510_config
    2011-01-01 00:04:39 kernel: mt7510_atm_open
    2011-01-01 00:04:39 kernel: vpi: 0
    2011-01-01 00:04:39 kernel: vci: 35
    2011-01-01 00:04:39 kernel: mt7510_atm_open vc 0:
    2011-01-01 00:04:39 kernel: ASIC dslUpRate Setting
    2011-01-01 00:04:39 kernel: ATM over ADSL mode init
    2011-01-01 00:04:39 kernel: dslUpRate: 2416
    2011-01-01 00:04:39 kernel: enter br2684_init_hook function
    2011-01-01 00:04:39 kernel: mt7510_init_MPOA
    2011-01-01 00:04:39 kernel: Init VC 0 MPOA Function
    2011-01-01 00:04:39 kernel: MPOA Mode: MODE_BRIDGE
    2011-01-01 00:04:39 kernel: MuxType: MUX_LLC
    2011-01-01 00:04:39 kernel: Mode: MODE_BRIDGE
    2011-01-01 00:04:39 kernel: br2684_init_hook: success
    2011-01-01 00:04:39 RFC1483/2684 bridge: Interface configured
    2011-01-01 00:04:39 RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started
    2011-01-01 00:04:40 syslog: Initialize LCP.
    2011-01-01 00:04:40 syslog: Plugin libpppoe.so loaded.
    2011-01-01 00:04:40 syslog: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
    2011-01-01 00:04:40 syslog: pppd 2.4.7 started by admin, uid 0
    2011-01-01 00:04:40 syslog: LCP is allowed to come up.
    2011-01-01 00:04:42 WEB: Configuration changed: Wan_PVC
    2011-01-01 00:04:43 kernel: generate miniupnpd.conf
    2011-01-01 00:04:43 kernel: launch upnp
    2011-01-01 00:04:43 kernel: start_miniupnpd. force(1)
    2011-01-01 00:04:43 kernel: stop upnp first
    2011-01-01 00:04:43 kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
    2011-01-01 00:04:43 WEB: Configuration changed: Upnpd_Entry
    2011-01-01 00:04:43 kernel: Link State: DSL link up.
    2011-01-01 00:04:43 WEB: Configuration changed: LanguageSwitch_Entry
    2011-01-01 00:04:44 WAN Connection: Wan link up.
    2011-01-01 00:04:47 kernel: tc3162_atm_close done
    2011-01-01 00:04:50 kernel:
    2011-01-01 00:04:50 kernel: ==> check_mulif_interface_existnas0
    2011-01-01 00:04:50 kernel: ==> to find mulif group of device nas0
    2011-01-01 00:04:50 kernel: ==>mulif err, no find mulif group of device nas0
    2011-01-01 00:04:50 kernel: mt7510_config
    2011-01-01 00:04:50 RFC1483/2684 bridge: Interface “nas0” created sucessfully
    2011-01-01 00:04:50 RFC1483/2684 bridge: Communicating over ATM 0.0.35, encapsulation: LLC
    2011-01-01 00:04:50 kernel: mt7510_atm_open
    2011-01-01 00:04:50 kernel: vpi: 0
    2011-01-01 00:04:50 kernel: vci: 35
    2011-01-01 00:04:50 kernel: mt7510_atm_open vc 0:
    2011-01-01 00:04:50 WAN Connection: Fail to connect with some issues.
    2011-01-01 00:04:50 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 104
    2011-01-01 00:05:03 syslog: PPP session is 25033
    2011-01-01 00:05:03 syslog: Connected to a0:e0:af:cc:71:92 via interface nas0
    2011-01-01 00:05:03 syslog: Using interface ppp0
    2011-01-01 00:05:03 syslog: Connect: ppp0 <–> nas0
    2011-01-01 00:05:04 syslog: PAP authentication succeeded
    2011-01-01 00:05:04 syslog: peer from calling number A0:E0:AF:CC:71:92 authorized
    2011-01-01 00:05:04 syslog: local IP address 5.160.113.145
    2011-01-01 00:05:04 syslog: remote IP address 5.202.112.165
    2011-01-01 00:05:04 syslog: primary DNS address 5.202.100.99
    2011-01-01 00:05:04 syslog: secondary DNS address 5.202.100.102
    2011-01-01 00:05:04 dnsmasq[7012]: started, version 2.78 cachesize 150
    2011-01-01 00:05:04 dnsmasq[7012]: using nameserver 5.202.100.102#53
    2011-01-01 00:05:04 dnsmasq[7012]: using nameserver 5.202.100.99#53
    2011-01-01 00:05:04 dnsmasq[7012]: reading /etc/resolv.conf
    2011-01-01 00:05:04 dnsmasq[7012]: using nameserver 5.202.100.102#53
    2011-01-01 00:05:04 dnsmasq[7012]: using nameserver 5.202.100.99#53
    2011-01-01 00:05:04 dnsmasq[7012]: ignoring nameserver 127.0.0.1 – local interface
    2011-01-01 00:05:04 dnsmasq[7012]: bad address at /etc/hosts line 2
    2011-01-01 00:05:04 dnsmasq[7012]: read /etc/hosts – 5 addresses
    2011-01-01 00:05:04 kernel: [route_setting]remove interface[0]=[ppp0]
    2011-01-01 00:05:05 kernel: Link State: PVC_0 logistic interface up.
    2011-01-01 00:05:05 WAN Connection: WAN was restored.
    2011-01-01 00:05:05 start_nat_rules: apply the nat_rules(/tmp/nat_rules)!
    2019-09-30 15:26:07 kernel: [qos_execute(9327)]:Force Turn Off Bandwidth Limiter on Guest Network.
    2019-09-30 15:26:08 kernel:
    2019-09-30 15:26:08 kernel: #### wan_primary: [5.160.113.145]
    2019-09-30 15:26:08 kernel: ddns_execute(), DDNS is not enable, so remove /etc/ddns.conf.
    2019-09-30 15:26:16 kernel: AP SETKEYS WPA2 MAC=4C:57:CA:29:91:56
    2019-09-30 15:26:16 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2011-01-01 00:00:37 syslogd started: BusyBox v1.00 (2019.09.06-08:28+0000)
    2011-01-01 00:00:37 rstats[1884]: [start rstats]
    2011-01-01 00:00:37 WAN Connection: Wan link down.
    2011-01-01 00:00:37 stop_nat_rules: apply the redirect_rules!
    2011-01-01 00:00:40 kernel: [route_setting]remove interface[0]=[ppp0]
    2011-01-01 00:00:40 kernel: Firmware version=[v9.1.2.3]
    2011-01-01 00:00:57 syslog: Timeout waiting for PADO packets
    2011-01-01 00:00:57 syslog: Unable to complete PPPoE Discovery
    2011-01-01 00:00:57 syslog: LCP down.
    2011-01-01 00:01:01 syslog: LCP is allowed to come up.
    2011-01-01 00:01:02 kernel: AP SETKEYS WPA2 MAC=D8:68:C3:55:1B:E1
    2011-01-01 00:01:04 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2011-01-01 00:01:04 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 104
    2011-01-01 00:01:17 kernel: Link State: DSL link up.
    2011-01-01 00:01:18 WAN Connection: Fail to connect with some issues.
    2011-01-01 00:01:20 kernel: tc3162_atm_close done
    2011-01-01 00:01:20 kernel:
    2011-01-01 00:01:20 kernel: ==> check_mulif_interface_existnas0
    2011-01-01 00:01:20 kernel: ==> to find mulif group of device nas0
    2011-01-01 00:01:20 kernel: ==>mulif err, no find mulif group of device nas0
    2011-01-01 00:01:21 kernel: AP SETKEYS WPA2 MAC=4C:57:CA:29:91:56
    2011-01-01 00:01:21 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2011-01-01 00:01:21 RFC1483/2684 bridge: Interface “nas0” created sucessfully
    2011-01-01 00:01:21 RFC1483/2684 bridge: Communicating over ATM 0.0.35, encapsulation: LLC
    2011-01-01 00:01:21 kernel: mt7510_config
    2011-01-01 00:01:21 kernel: mt7510_atm_open
    2011-01-01 00:01:21 kernel: vpi: 0
    2011-01-01 00:01:21 kernel: vci: 35
    2011-01-01 00:01:21 kernel: mt7510_atm_open vc 0:
    2011-01-01 00:01:21 kernel: ATM over ADSL mode init
    2011-01-01 00:01:21 kernel: dslUpRate: 1809
    2011-01-01 00:01:21 kernel: enter br2684_init_hook function
    2011-01-01 00:01:21 kernel: mt7510_init_MPOA
    2011-01-01 00:01:21 kernel: Init VC 0 MPOA Function
    2011-01-01 00:01:21 kernel: MPOA Mode: MODE_BRIDGE
    2011-01-01 00:01:21 kernel: MuxType: MUX_LLC
    2011-01-01 00:01:21 kernel: Mode: MODE_BRIDGE
    2011-01-01 00:01:21 kernel: br2684_init_hook: success
    2011-01-01 00:01:21 RFC1483/2684 bridge: Interface configured
    2011-01-01 00:01:21 RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started
    2011-01-01 00:01:21 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 104
    2011-01-01 00:01:22 syslog: Initialize LCP.
    2011-01-01 00:01:22 syslog: Plugin libpppoe.so loaded.
    2011-01-01 00:01:22 syslog: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
    2011-01-01 00:01:22 syslog: pppd 2.4.7 started by admin, uid 0
    2011-01-01 00:01:22 syslog: LCP is allowed to come up.
    2011-01-01 00:01:28 syslog: PPP session is 12388
    2011-01-01 00:01:28 syslog: Connected to a0:e0:af:cc:71:92 via interface nas0
    2011-01-01 00:01:28 syslog: Using interface ppp0
    2011-01-01 00:01:28 syslog: Connect: ppp0 <–> nas0
    2011-01-01 00:01:28 syslog: PAP authentication succeeded
    2011-01-01 00:01:28 syslog: peer from calling number A0:E0:AF:CC:71:92 authorized
    2011-01-01 00:01:28 syslog: local IP address 5.160.114.215
    2011-01-01 00:01:28 syslog: remote IP address 5.202.112.165
    2011-01-01 00:01:28 syslog: primary DNS address 5.202.100.99
    2011-01-01 00:01:28 syslog: secondary DNS address 5.202.100.102
    2011-01-01 00:01:28 dnsmasq[2581]: started, version 2.78 cachesize 150
    2011-01-01 00:01:28 dnsmasq[2581]: using nameserver 5.202.100.102#53
    2011-01-01 00:01:28 dnsmasq[2581]: using nameserver 5.202.100.99#53
    2011-01-01 00:01:28 dnsmasq[2581]: reading /etc/resolv.conf
    2011-01-01 00:01:28 dnsmasq[2581]: using nameserver 5.202.100.102#53
    2011-01-01 00:01:28 dnsmasq[2581]: using nameserver 5.202.100.99#53
    2011-01-01 00:01:28 dnsmasq[2581]: ignoring nameserver 127.0.0.1 – local interface
    2011-01-01 00:01:28 dnsmasq[2581]: bad address at /etc/hosts line 2
    2011-01-01 00:01:28 dnsmasq[2581]: read /etc/hosts – 5 addresses
    2011-01-01 00:01:29 kernel: [route_setting]remove interface[0]=[ppp0]
    2011-01-01 00:01:29 kernel: Link State: PVC_0 logistic interface up.
    2011-01-01 00:01:29 kernel: [qos_execute(9327)]:Force Turn Off Bandwidth Limiter on Guest Network.
    2019-09-30 15:33:51 kernel:
    2019-09-30 15:33:51 kernel: #### wan_primary: [5.160.114.215]
    2019-09-30 15:33:51 kernel: ddns_execute(), DDNS is not enable, so remove /etc/ddns.conf.
    2019-09-30 15:33:53 syslog: Initialize LCP.
    2019-09-30 15:33:53 syslog: Plugin pppol2tp.so loaded.
    2019-09-30 15:33:53 syslog: pppd 2.4.7 started by admin, uid 0
    2019-09-30 15:33:53 syslog: LCP is allowed to come up.
    2019-09-30 15:33:53 syslog: Using interface ppp20
    2019-09-30 15:33:53 syslog: Connect: ppp20 <–> l2tp (128.51.117.76)
    2019-09-30 15:33:53 syslog: CHAP authentication success
    2019-09-30 15:33:53 syslog: CHAP authentication succeeded
    2019-09-30 15:33:53 syslog: local IP address 172.31.0.140
    2019-09-30 15:33:53 syslog: remote IP address 172.31.1.1
    2019-09-30 15:33:53 syslog: primary DNS address 217.218.155.155
    2019-09-30 15:33:53 syslog: secondary DNS address 8.8.8.8
    2019-09-30 15:33:53 dnsmasq[2581]: exiting on receipt of SIGTERM
    2019-09-30 15:33:53 dnsmasq[2784]: started, version 2.78 cachesize 150
    2019-09-30 15:33:53 dnsmasq[2784]: using nameserver 8.8.8.8#53
    2019-09-30 15:33:53 dnsmasq[2784]: using nameserver 217.218.155.155#53
    2019-09-30 15:33:53 dnsmasq[2784]: reading /etc/resolv.conf
    2019-09-30 15:33:53 dnsmasq[2784]: using nameserver 8.8.8.8#53
    2019-09-30 15:33:53 dnsmasq[2784]: using nameserver 217.218.155.155#53
    2019-09-30 15:33:53 dnsmasq[2784]: ignoring nameserver 127.0.0.1 – local interface
    2019-09-30 15:33:53 dnsmasq[2784]: bad address at /etc/hosts line 2
    2019-09-30 15:33:53 dnsmasq[2784]: read /etc/hosts – 5 addresses
    2019-09-30 15:33:54 WAN Connection: WAN was restored.
    2019-09-30 15:33:54 start_nat_rules: apply the nat_rules(/tmp/nat_rules)!
    2019-09-30 15:34:00 kernel: AP SETKEYS WPA2 MAC=C8:02:10:7B:6A:60
    2019-09-30 15:34:03 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2019-09-30 15:34:22 crond[1864]: time disparity of 4600293 minutes detected
    2019-09-30 15:37:09 WEB: User [admin] logged in from [192.168.1.2] via WEB
    2019-09-30 15:40:23 WEB: Configuration changed: SysInfo_Entry
    2019-09-30 15:40:24 kernel:
    2019-09-30 15:40:24 kernel:
    2019-09-30 15:40:24 kernel: WPSActiveStatus = NULL
    2019-09-30 15:40:24 kernel: WPSOOBActive = NULL
    2019-09-30 15:40:24 kernel: ReCounterActive = NULL
    2019-09-30 15:40:24 kernel: WPSGenPinCode = NULL
    2019-09-30 15:40:24 kernel: write_wlan_AutoChannelSkipList -(0x20)
    2019-09-30 15:40:24 kernel:
    2019-09-30 15:40:25 kernel: MTPciPollTxRxEmpty
    2019-09-30 15:40:25 kernel: AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0
    2019-09-30 15:40:25 kernel: RTMPSetPiggyBack(879): Not support for HIF_MT yet!
    2019-09-30 15:40:25 kernel: RT28xxPciAsicRadioOff(): Not support for HIF_MT yet!
    2019-09-30 15:40:25 kernel: tx_kickout_fail_count = 0
    2019-09-30 15:40:25 kernel: tx_timeout_fail_count = 0
    2019-09-30 15:40:25 kernel: rx_receive_fail_count = 0
    2019-09-30 15:40:25 kernel: alloc_cmd_msg = 3025
    2019-09-30 15:40:25 kernel: free_cmd_msg = 3025
    2019-09-30 15:40:25 kernel: br0: port 1(ra0) entering forwarding state
    2019-09-30 15:40:25 kernel: device ra0 left promiscuous mode
    2019-09-30 15:40:25 kernel: br0: port 1(ra0) entering disabled state
    2019-09-30 15:40:44 kernel: TX_BCN DESC a1afd000 size = 320
    2019-09-30 15:40:45 kernel: RX[0] DESC a1aff000 size = 2048
    2019-09-30 15:40:45 kernel: RX[1] DESC a1b04000 size = 2048
    2019-09-30 15:40:45 kernel: cfg_mode=9
    2019-09-30 15:40:45 kernel: cfg_mode=9
    2019-09-30 15:40:45 kernel: wmode_band_equal(): Band Equal!
    2019-09-30 15:40:45 kernel: FW Version:CL173766-A
    2019-09-30 15:40:45 kernel: FW Build Date:20170925114906
    2019-09-30 15:40:45 kernel: AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
    2019-09-30 15:40:45 kernel: efuse_probe: efuse = 10000002
    2019-09-30 15:40:45 kernel: RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5
    2019-09-30 15:40:45 WEB: Configuration changed: ACL_Entry
    2019-09-30 15:40:45 kernel: HTB: quantum of class 10001 is big. Consider r2q change.
    2019-09-30 15:40:45 kernel: HTB: quantum of class 20001 is big. Consider r2q change.
    2019-09-30 15:40:45 kernel: HTB: quantum of class 30008 is small. Consider r2q change.
    2019-09-30 15:40:45 kernel: HTB: quantum of class 20008 is small. Consider r2q change.
    2019-09-30 15:40:45 WEB: Configuration changed: QoS
    2019-09-30 15:40:48 kernel: AP SETKEYS WPA2 MAC=C8:02:10:7B:6A:60
    2019-09-30 15:40:49 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2019-09-30 15:41:43 syslog: Terminating on signal 15
    2019-09-30 15:41:43 syslog: Connect time 7.9 minutes.
    2019-09-30 15:41:43 syslog: Sent 261192 bytes, received 36009 bytes.
    2019-09-30 15:41:43 syslog: LCP down.
    2019-09-30 15:41:43 dnsmasq[2784]: exiting on receipt of SIGTERM
    2019-09-30 15:41:44 dnsmasq[13292]: started, version 2.78 cachesize 150
    2019-09-30 15:41:44 dnsmasq[13292]: using nameserver 5.202.100.102#53
    2019-09-30 15:41:44 dnsmasq[13292]: using nameserver 5.202.100.99#53
    2019-09-30 15:41:44 dnsmasq[13292]: reading /etc/resolv.conf
    2019-09-30 15:41:44 dnsmasq[13292]: using nameserver 5.202.100.102#53
    2019-09-30 15:41:44 dnsmasq[13292]: using nameserver 5.202.100.99#53
    2019-09-30 15:41:44 dnsmasq[13292]: ignoring nameserver 127.0.0.1 – local interface
    2019-09-30 15:41:44 dnsmasq[13292]: bad address at /etc/hosts line 2
    2019-09-30 15:41:44 dnsmasq[13292]: read /etc/hosts – 5 addresses
    2019-09-30 15:41:49 syslog: Connection terminated.
    2019-09-30 15:41:49 syslog: Modem hangup
    2019-09-30 15:41:49 syslog: LCP down.
    2019-09-30 15:41:49 syslog: Exit.
    2019-09-30 15:42:05 WEB: Configuration changed: VPNC_Entry
    2019-09-30 15:42:30 kernel: stop_miniupnpd
    2019-09-30 15:42:33 kernel: generate miniupnpd.conf
    2019-09-30 15:42:33 kernel: launch upnp
    2019-09-30 15:42:33 kernel: start_miniupnpd. force(1)
    2019-09-30 15:42:33 kernel: stop upnp first
    2019-09-30 15:42:33 kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
    2019-09-30 15:42:35 kernel: * Phyaddr=8 RegAddr=00 value=8000
    2019-09-30 15:42:35 kernel: * Phyaddr=9 RegAddr=00 value=8000
    2019-09-30 15:42:35 kernel: * Phyaddr=10 RegAddr=00 value=8000
    2019-09-30 15:42:35 kernel: * Phyaddr=11 RegAddr=00 value=8000
    2019-09-30 15:42:35 kernel: tcphy[0]: Link-down!!!
    2019-09-30 15:42:35 kernel: Link State: LAN_1 down.
    2019-09-30 15:42:38 kernel: Link State: LAN_1 up.
    2019-09-30 15:42:38 kernel: tcphy[0]: Link-up at 100F. tx_amp_save=0.
    2019-09-30 15:42:38 kernel: tcphy[8]: boosten=1 agccode=5 zfgain=4 ch_idx=20 snr=2
    2019-09-30 15:42:38 kernel: AP SETKEYS WPA2 MAC=D8:68:C3:55:1B:E1
    2019-09-30 15:42:39 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2019-09-30 15:43:17 WEB: User [admin] logged in from [192.168.1.2] via WEB
    2019-09-30 15:43:49 WEB: Configuration changed: VPNC_Entry
    2019-09-30 15:43:49 syslog: Initialize LCP.
    2019-09-30 15:43:49 syslog: Plugin pppol2tp.so loaded.
    2019-09-30 15:43:49 syslog: pppd 2.4.7 started by admin, uid 0
    2019-09-30 15:43:49 syslog: LCP is allowed to come up.
    2019-09-30 15:43:49 syslog: Using interface ppp20
    2019-09-30 15:43:49 syslog: Connect: ppp20 <–> l2tp (128.51.117.76)
    2019-09-30 15:43:50 syslog: CHAP authentication success
    2019-09-30 15:43:50 syslog: CHAP authentication succeeded
    2019-09-30 15:43:50 syslog: local IP address 172.31.0.140
    2019-09-30 15:43:50 syslog: remote IP address 172.31.1.1
    2019-09-30 15:43:50 syslog: primary DNS address 217.218.155.155
    2019-09-30 15:43:50 syslog: secondary DNS address 8.8.8.8
    2019-09-30 15:43:51 dnsmasq[13292]: exiting on receipt of SIGTERM
    2019-09-30 15:43:51 dnsmasq[16701]: started, version 2.78 cachesize 150
    2019-09-30 15:43:51 dnsmasq[16701]: using nameserver 8.8.8.8#53
    2019-09-30 15:43:51 dnsmasq[16701]: using nameserver 217.218.155.155#53
    2019-09-30 15:43:51 dnsmasq[16701]: reading /etc/resolv.conf
    2019-09-30 15:43:51 dnsmasq[16701]: using nameserver 8.8.8.8#53
    2019-09-30 15:43:51 dnsmasq[16701]: using nameserver 217.218.155.155#53
    2019-09-30 15:43:51 dnsmasq[16701]: ignoring nameserver 127.0.0.1 – local interface
    2019-09-30 15:43:51 dnsmasq[16701]: bad address at /etc/hosts line 2
    2019-09-30 15:43:51 dnsmasq[16701]: read /etc/hosts – 5 addresses
    2019-09-30 15:46:33 kernel: AP SETKEYS WPA2 MAC=4C:57:CA:29:91:56
    2019-09-30 15:46:33 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2019-09-30 15:47:22 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 72
    2019-09-30 15:47:29 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 72
    2019-09-30 15:50:06 kernel: AP SETKEYS WPA2 MAC=8C:F5:A3:2B:B0:4D
    2019-09-30 15:50:06 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2019-09-30 15:50:08 kernel: BA – Send ADDBA request. StartSeq = 0, FrameLen = 33. BufSize = 72
    2019-09-30 15:52:31 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 56
    2019-09-30 15:54:54 kernel: BA – Send ADDBA request. StartSeq = 402, FrameLen = 33. BufSize = 8
    2019-09-30 15:56:55 kernel: BA – Send ADDBA request. StartSeq = e0d, FrameLen = 33. BufSize = 8
    2019-09-30 15:58:56 kernel: BA – Send ADDBA request. StartSeq = e0a, FrameLen = 33. BufSize = 8
    2019-09-30 16:00:57 kernel: BA – Send ADDBA request. StartSeq = 304, FrameLen = 33. BufSize = 8
    2019-09-30 16:01:12 kernel: BA – Send ADDBA request. StartSeq = 90f, FrameLen = 33. BufSize = 8
    2019-09-30 16:02:37 kernel: BA – Send ADDBA request. StartSeq = 60e, FrameLen = 33. BufSize = 8
    2019-09-30 16:02:58 kernel: BA – Send ADDBA request. StartSeq = 60f, FrameLen = 33. BufSize = 8
    2019-09-30 16:15:03 kernel: BA – Send ADDBA request. StartSeq = 2, FrameLen = 33. BufSize = 8
    2019-09-30 16:17:24 kernel: PsRetrieveTimeout() Recover ps state(state 1 to state 5) [wcid = 3]!!
    2019-09-30 16:18:22 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 104
    2019-09-30 16:19:02 kernel: BA – Send ADDBA request. StartSeq = e07, FrameLen = 33. BufSize = 8
    2011-01-01 00:00:41 syslogd started: BusyBox v1.00 (2019.09.06-08:28+0000)
    2011-01-01 00:00:43 kernel: [route_setting]remove interface[0]=[ppp0]
    2011-01-01 00:00:43 WAN Connection: Wan link down.
    2011-01-01 00:00:43 stop_nat_rules: apply the redirect_rules!
    2011-01-01 00:00:43 kernel: Firmware version=[v9.1.2.3]
    2011-01-01 00:00:51 kernel: AP SETKEYS WPA2 MAC=D8:68:C3:55:1B:E1
    2011-01-01 00:00:51 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2011-01-01 00:00:51 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 104
    2011-01-01 00:00:55 kernel: AP SETKEYS WPA2 MAC=50:C8:E5:80:00:46
    2011-01-01 00:00:57 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8
    2011-01-01 00:00:58 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 104
    2011-01-01 00:01:01 syslog: Timeout waiting for PADO packets
    2011-01-01 00:01:01 syslog: Unable to complete PPPoE Discovery
    2011-01-01 00:01:01 syslog: LCP down.
    2011-01-01 00:01:05 syslog: LCP is allowed to come up.
    2011-01-01 00:01:15 kernel: Link State: DSL link up.
    2011-01-01 00:01:17 WAN Connection: Fail to connect with some issues.
    2011-01-01 00:01:18 kernel: tc3162_atm_close done

    September 30, 2019 at 4:16 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4633
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    Ok, is the configuration new, maybe factory reset router and build manually, not from backup I notice in logs that there is a (dnsmasq[3367]: bad address at /etc/hosts line 2) but am surprised if this is causing the reboot ?

    i didn’t restore setting to default but i will try that and report back.

    September 30, 2019 at 3:50 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4631
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    kamiboy wrote:

    When DSL-N16 is running, but VPN is OFF, does router still reboot after a few minutes ?

    NO problem when vpn is OFF.

    September 30, 2019 at 3:48 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4630
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    Also, has the VPN ever worked correctly with your DSL-N16, or is this a new VPN set-up? When DSL-N16 is running, but VPN is OFF, does router still reboot after a few minutes ?

    yes sir, i have no issue with pptp and open vpn only l2tp vpn has issue and cause modem rebooting …

    September 30, 2019 at 3:16 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4626
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    Great, try the latest beta I have from ASUS which included some VPN improvements https://www.asuswebstorage.com/navigate/a/#/s/8DF21FF35D4E46F092D567B3B305AA7BY

    i tried latest beta firmware for dsl-n16 (9.1.2.3_783) problem with l2tp vpn connection didn’t solve and modem reboot itself after few minutes again .

     

    2019-09-30 17:31:21 WEB: Configuration changed: LogAccess_ClearLog
    2019-09-30 17:32:22 kernel: AP SETKEYS WPA2 MAC=4C:57:CA:29:91:56
    2019-09-30 17:32:22 kernel: BA – Send ADDBA request. StartSeq = 400, FrameLen = 33. BufSize = 8
    2011-01-01 03:30:42 syslogd started: BusyBox v1.00 (2019.09.06-08:28+0000)
    2011-01-01 03:30:42 WAN Connection: Wan link down.
    2011-01-01 03:30:42 stop_nat_rules: apply the redirect_rules!
    2011-01-01 03:30:45 kernel: [route_setting]remove interface[0]=[ppp0]
    2011-01-01 03:30:46 kernel: Firmware version=[v9.1.2.3]
    2011-01-01 03:30:55 WEB: User [admin] logged in from [192.168.1.2] via WEB
    2011-01-01 03:30:58 kernel: ==restart boa server(0)==
    2011-01-01 03:31:01 syslog: Timeout waiting for PADO packets
    2011-01-01 03:31:02 syslog: Unable to complete PPPoE Discovery
    2011-01-01 03:31:02 syslog: LCP down.
    2011-01-01 03:31:06 syslog: LCP is allowed to come up.
    2011-01-01 03:31:06 WEB: User [admin] logged in from [192.168.1.2] via WEB
    2011-01-01 03:31:20 kernel: Link State: DSL link up.
    2011-01-01 03:31:22 kernel: tc3162_atm_close done
    2011-01-01 03:31:22 kernel:
    2011-01-01 03:31:22 kernel: ==> check_mulif_interface_existnas0
    2011-01-01 03:31:22 kernel: ==> to find mulif group of device nas0
    2011-01-01 03:31:22 kernel: ==>mulif err, no find mulif group of device nas0
    2011-01-01 03:31:23 WAN Connection: Fail to connect with some issues.
    2011-01-01 03:31:23 RFC1483/2684 bridge: Interface “nas0” created sucessfully
    2011-01-01 03:31:23 RFC1483/2684 bridge: Communicating over ATM 0.0.35, encapsulation: LLC
    2011-01-01 03:31:24 kernel: mt7510_config
    2011-01-01 03:31:24 kernel: mt7510_atm_open
    2011-01-01 03:31:24 kernel: vpi: 0
    2011-01-01 03:31:24 kernel: vci: 35
    2011-01-01 03:31:24 kernel: mt7510_atm_open vc 0:
    2011-01-01 03:31:24 kernel: ATM over ADSL mode init
    2011-01-01 03:31:24 kernel: dslUpRate: 1809
    2011-01-01 03:31:24 kernel: enter br2684_init_hook function
    2011-01-01 03:31:24 kernel: mt7510_init_MPOA
    2011-01-01 03:31:24 kernel: Init VC 0 MPOA Function
    2011-01-01 03:31:24 kernel: MPOA Mode: MODE_BRIDGE
    2011-01-01 03:31:24 kernel: MuxType: MUX_LLC
    2011-01-01 03:31:24 kernel: Mode: MODE_BRIDGE
    2011-01-01 03:31:24 kernel: br2684_init_hook: success
    2011-01-01 03:31:24 RFC1483/2684 bridge: Interface configured
    2011-01-01 03:31:24 RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started
    2011-01-01 03:31:24 kernel: AP SETKEYS WPA2 MAC=4C:57:CA:29:91:56
    2011-01-01 03:31:24 kernel: BA – Send ADDBA request. StartSeq = 400, FrameLen = 33. BufSize = 8
    2011-01-01 03:31:24 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 104
    2011-01-01 03:31:25 syslog: Initialize LCP.
    2011-01-01 03:31:25 syslog: Plugin libpppoe.so loaded.
    2011-01-01 03:31:25 syslog: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
    2011-01-01 03:31:25 syslog: pppd 2.4.7 started by admin, uid 0
    2011-01-01 03:31:25 syslog: LCP is allowed to come up.
    2011-01-01 03:31:30 syslog: PPP session is 22984
    2011-01-01 03:31:30 syslog: Connected to a0:e0:af:cc:71:92 via interface nas0
    2011-01-01 03:31:30 syslog: Using interface ppp0
    2011-01-01 03:31:30 syslog: Connect: ppp0 <–> nas0
    2011-01-01 03:31:30 syslog: PAP authentication succeeded
    2011-01-01 03:31:30 syslog: peer from calling number A0:E0:AF:CC:71:92 authorized
    2011-01-01 03:31:31 syslog: local IP address 5.160.112.117
    2011-01-01 03:31:31 syslog: remote IP address 5.202.112.165
    2011-01-01 03:31:31 syslog: primary DNS address 5.202.100.99
    2011-01-01 03:31:31 syslog: secondary DNS address 5.202.100.102
    2011-01-01 03:31:31 kernel: Link State: PVC_0 logistic interface up.
    2011-01-01 03:31:31 dnsmasq[2738]: started, version 2.78 cachesize 150
    2011-01-01 03:31:31 dnsmasq[2738]: using nameserver 8.8.8.8#53
    2011-01-01 03:31:31 dnsmasq[2738]: using nameserver 217.218.155.155#53
    2011-01-01 03:31:31 dnsmasq[2738]: reading /etc/resolv.conf
    2011-01-01 03:31:31 dnsmasq[2738]: using nameserver 8.8.8.8#53
    2011-01-01 03:31:31 dnsmasq[2738]: using nameserver 217.218.155.155#53
    2011-01-01 03:31:31 dnsmasq[2738]: ignoring nameserver 127.0.0.1 – local interface
    2011-01-01 03:31:31 dnsmasq[2738]: bad address at /etc/hosts line 2
    2011-01-01 03:31:31 dnsmasq[2738]: read /etc/hosts – 5 addresses
    2019-09-30 17:39:42 kernel: [route_setting]remove interface[0]=[ppp0]
    2019-09-30 17:39:42 kernel: HTB: quantum of class 10001 is big. Consider r2q change.
    2019-09-30 17:39:42 kernel: HTB: quantum of class 20001 is big. Consider r2q change.
    2019-09-30 17:39:42 kernel: HTB: quantum of class 30008 is small. Consider r2q change.
    2019-09-30 17:39:42 kernel: HTB: quantum of class 20008 is small. Consider r2q change.
    2019-09-30 17:39:43 WAN Connection: WAN was restored.
    2019-09-30 17:39:43 start_nat_rules: apply the nat_rules(/tmp/nat_rules)!
    2019-09-30 17:39:54 kernel:
    2019-09-30 17:39:54 kernel: #### wan_primary: [5.160.112.117]
    2019-09-30 17:39:54 kernel: ddns_execute(), DDNS is not enable, so remove /etc/ddns.conf.
    2019-09-30 17:39:55 kernel: BA – Send ADDBA request. StartSeq = 100, FrameLen = 33. BufSize = 72
    2019-09-30 17:39:56 syslog: Initialize LCP.
    2019-09-30 17:39:56 syslog: Plugin pppol2tp.so loaded.
    2019-09-30 17:39:56 syslog: pppd 2.4.7 started by admin, uid 0
    2019-09-30 17:39:56 syslog: LCP is allowed to come up.
    2019-09-30 17:39:56 syslog: Using interface ppp20
    2019-09-30 17:39:56 syslog: Connect: ppp20 <–> l2tp (128.51.117.76)
    2019-09-30 17:39:57 syslog: CHAP authentication success
    2019-09-30 17:39:57 syslog: CHAP authentication succeeded
    2019-09-30 17:39:57 syslog: local IP address 172.31.0.145
    2019-09-30 17:39:57 syslog: remote IP address 172.31.1.1
    2019-09-30 17:39:57 syslog: primary DNS address 217.218.155.155
    2019-09-30 17:39:57 syslog: secondary DNS address 8.8.8.8
    2019-09-30 17:39:58 dnsmasq[2738]: exiting on receipt of SIGTERM
    2019-09-30 17:39:58 dnsmasq[3367]: started, version 2.78 cachesize 150
    2019-09-30 17:39:58 dnsmasq[3367]: using nameserver 8.8.8.8#53
    2019-09-30 17:39:58 dnsmasq[3367]: using nameserver 217.218.155.155#53
    2019-09-30 17:39:58 dnsmasq[3367]: reading /etc/resolv.conf
    2019-09-30 17:39:58 dnsmasq[3367]: using nameserver 8.8.8.8#53
    2019-09-30 17:39:58 dnsmasq[3367]: using nameserver 217.218.155.155#53
    2019-09-30 17:39:58 dnsmasq[3367]: ignoring nameserver 127.0.0.1 – local interface
    2019-09-30 17:39:58 dnsmasq[3367]: bad address at /etc/hosts line 2
    2019-09-30 17:39:58 dnsmasq[3367]: read /etc/hosts – 5 addresses
    2019-09-30 17:40:10 crond[599]: time disparity of 4600209 minutes detected
    2019-09-30 17:40:49 kernel: AP SETKEYS WPA2 MAC=8C:F5:A3:2B:B0:4D
    2019-09-30 17:40:50 kernel: BA – Send ADDBA request. StartSeq = 300, FrameLen = 33. BufSize = 8

    September 30, 2019 at 2:54 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4625
    Avatarkamiboy
    • Replies 32
    • Forum Regular
    UK Sentinel wrote:

    Great, try the latest beta I have from ASUS which included some VPN improvements https://www.asuswebstorage.com/navigate/a/#/s/8DF21FF35D4E46F092D567B3B305AA7BY

     

    thank you, i will try this new beta firmware i get back to you when i test this firmware.

    September 30, 2019 at 2:17 pm in reply to: ASUS DSL-N16 issue with l2tp vpn connection Hello.my asus dsl-n16 reboot itself when i connected to l2tp vpn connection  after few minutes please help me . #4622
    Avatarkamiboy
    • Replies 32
    • Forum Regular

    yes sir, i have latest official firmware (1.1.2.3_743)…

     

    Attachments:

    1. 2019-09-30-16_46_26-Window.png

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 30 total)
1 2
Latest Posts