UK Tech Forums
I’ve tried these, that whilst they are accepted, they do not actually do anything – unless they should be preceded by a save, or reboot?
wan dmt2 set snrmoffset xx xx (snr tweak)
wan dmt2 set path x (0-2 channel profile fast interleaved)
wan adsl reset
wan vdsl2 set target_snrm xx (snr tweak vdsl2)
wan vdsl2 set max_ds_rate xx (something about data rate)
wan vdsl2 set manual_pms on/off (something about channel profile)
wan vdsl2 set inpdelay_pms xx (same ^)
wan vdsl2 set tcm_tx on/off (idk)
wan vdsl2 set tcm_rx on/off (idk)
You need to login in order to vote
Thank you buddy, yeah I came to the same conclusion; very much appreciate your help :)
You need to login in order to vote
Does the putty cmd connect to router (192.168.1.1) and can you login (authenticate) etc?
Yes I can log into putty / land here post entering admin/password
ASUSWRT-Merlin DSL-AC68U 384.17_0-gnuton1 Sat May 2 06:41:59 UTC 2020
admin@DSL-AC68U-5ED0:/tmp/home/root#
I then enter ‘telnet 169.254.0.1’ admin /password – land here (this is where I am entering the commands)
Entering character mode
Escape character is ‘^]’.
tc login: admin
Password:
tc>
You need to login in order to vote
Thank you for taking your time to reply.
Yes, I currently have an up/downlink.
Excuse my ignorance ‘lan port 4’; is this the telnet/ssh port I define in the UI, currently default 23?
Or you mean the lan port back ‘4’ on the router my PC is connected too?
Edit: pc connected to LAN port 4, same thing :(
You need to login in order to vote
