Forum Replies Created
-
AuthorPosts
-
Does the below mean 0 = on as default?
bitswap [US] = 1, [DS] = 1.
[0: default(ON), 1: ON, 2: OFF]You need to login in order to vote
Should i leave it off as my FEC errors seem to have dropped?
I cant seem to add images from Imgur using BB codes?
You need to login in order to vote
Seems it has switched off for some reason?
———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Near End Far End Note
Trellis : 1 1
Bitswap : 0 1
ReTxEnable : 0 0
VirtualNoise : 0 0
20BitSupport : 0 0
LatencyPath : 0 0
LOS : 0 0
LOF : 0 0
LPR : 0 0
LOM : 0 0
SosSuccess : 0 0
NCD : 0 0
LCD : 0 0
FECS : 20548 53825 (seconds)
ES : 1 2647 (seconds)
SES : 0 31 (seconds)
LOSS : 0 1 (seconds)
UAS : 33 81898 (seconds)
HECError : 0 0
CRC : 1 4047
RsCorrection : 0 0
INP : 0 40 (symbols)
InterleaveDelay : 0 1600 (1/100 ms)
NFEC : 255 61
RFEC : 16 16
LSYMB : 2898 11974
INTLVBLOCK : 255 61
AELEM : 0 —-You need to login in order to vote
Turned off modem and checked BT socket wiring all looks good, turned back on at approx 10am.
The socket was supplied and fitted by a BT engineer. I cant seem to add pics ?
Stats checked at 14.47pm
———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 35000000 bps US Actual Rate : 10801000 bps
DS Attainable Rate : 43941472 bps US Attainable Rate : 10775892 bps
DS Path Mode : Interleave US Path Mode : Fast
DS Interleave Depth : 1562 US Interleave Depth : 1
NE Current Attenuation : 19 dB Cur SNR Margin : 6 dB
DS actual PSD : 6. 3 dB US actual PSD : 13. 4 dB
NE CRC Count : 1 FE CRC Count : 4047
NE ES Count : 1 FE ES Count : 2647
Xdsl Reset Times : 0 Xdsl Link Times : 1
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
——————————– ATU-C Info ———————————
Far Current Attenuation : 27 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544ed086
DSLAM CHIPSET VENDOR : < IFTN >
> vdsl status counts[ Counters: Showtime ]
Near End Far End Note
ElapsedTime : 14724 14724 (seconds)
CRC : 1 4047
FEC : 20496 53825
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 1 2647
SES : 0 31
LOSS : 0 1
UAS : 0 0
LOFS : 0 0
[ Counters: 15Min ]
Near End Far End Note
ElapsedTime : 717 717 (seconds)
CRC : 0 0
FEC : 1107 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0
[ Counters: 1DAY ]
Near End Far End Note
ElapsedTime : 16917 16917 (seconds)
CRC : 1 4047
FEC : 20496 53825
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 1 2647
SES : 0 31
LOSS : 0 1
UAS : 0 0
LOFS : 0 0You need to login in order to vote
Todays stats –
———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 35000000 bps US Actual Rate : 10666000 bps
DS Attainable Rate : 45016400 bps US Attainable Rate : 10855195 bps
DS Path Mode : Interleave US Path Mode : Fast
DS Interleave Depth : 1514 US Interleave Depth : 1
NE Current Attenuation : 20 dB Cur SNR Margin : 5 dB
DS actual PSD : 6. 4 dB US actual PSD : 12. 7 dB
NE CRC Count : 2 FE CRC Count : 4047
NE ES Count : 2 FE ES Count : 2647
Xdsl Reset Times : 0 Xdsl Link Times : 4
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
——————————– ATU-C Info ———————————
Far Current Attenuation : 27 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544ed086
DSLAM CHIPSET VENDOR : < IFTN >
> vdsl status counts[ Counters: Showtime ]
Near End Far End Note
ElapsedTime : 503896 503896 (seconds)
CRC : 0 4047
FEC : 890519562 53824
HEC : 0 0
CRC_P : -1 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 1 2647
SES : 3 31
LOSS : 0 1
UAS : 0 0
LOFS : 0 0
[ Counters: 15Min ]
Near End Far End Note
ElapsedTime : 640 640 (seconds)
CRC : 0 0
FEC : 2794940 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0
[ Counters: 1DAY ]
Near End Far End Note
ElapsedTime : 59140 59140 (seconds)
CRC : 1 0
FEC : 330576607 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 1 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0You need to login in order to vote
Is there a way to tell if G.INP is active on my line? I hear BT have rolled out testing on ECI cabinets.
You need to login in order to vote
OK, i maybe able to check early tomorrow morning, when the other members of the family are still asleep.
You need to login in order to vote
With the amount of FEC errors will fast path return?
[ Counters: Showtime ]
Near End Far End Note
ElapsedTime : 383280 383280 (seconds)
CRC : -1 4046
FEC : 258004342 53814
HEC : 0 0
CRC_P : -1 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 2646
SES : 3 31
LOSS : 0 1
UAS : 0 0
LOFS : 0 0
[ Counters: 15Min ]
Near End Far End Note
ElapsedTime : 103 103 (seconds)
CRC : 0 0
FEC : 239368 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0
[ Counters: 1DAY ]
Near End Far End Note
ElapsedTime : 7303 7303 (seconds)
CRC : 0 0
FEC : 16686684 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 35000000 bps US Actual Rate : 10666000 bps
DS Attainable Rate : 44633936 bps US Attainable Rate : 10666135 bps
DS Path Mode : Interleave US Path Mode : Fast
DS Interleave Depth : 1514 US Interleave Depth : 1
NE Current Attenuation : 20 dB Cur SNR Margin : 6 dB
DS actual PSD : 6. 4 dB US actual PSD : 13. 1 dB
NE CRC Count : 1 FE CRC Count : 4046
NE ES Count : 1 FE ES Count : 2646
Xdsl Reset Times : 0 Xdsl Link Times : 4
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
——————————– ATU-C Info ———————————
Far Current Attenuation : 27 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544ed086
DSLAM CHIPSET VENDOR : < IFTN >
>———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Near End Far End Note
Trellis : 1 1
Bitswap : 1 1
ReTxEnable : 0 0
VirtualNoise : 0 0
20BitSupport : 0 0
LatencyPath : 0 0
LOS : 4 0
LOF : 0 0
LPR : 0 0
LOM : 0 0
SosSuccess : 0 0
NCD : 0 0
LCD : 0 0
FECS : 258146886 53814 (seconds)
ES : 1 2646 (seconds)
SES : 0 31 (seconds)
LOSS : 0 1 (seconds)
UAS : 33 80427 (seconds)
HECError : 0 0
CRC : 1 4046
RsCorrection : 0 0
INP : 0 40 (symbols)
InterleaveDelay : 0 1500 (1/100 ms)
NFEC : 255 61
RFEC : 16 16
LSYMB : 2862 11974
INTLVBLOCK : 255 61
AELEM : 0 —-
>You need to login in order to vote
Originally I had fast path on both directions, I can’t remember when I lost it on downstream.
You need to login in order to vote
Can you post picture how is connected your modem and how is connected extension line to master socket? Just wonder if telephone line which going to your living room is connected to filtered socket or unfiltered.
Cat5e cable RJ45 from from face plate to modem RJ11. Phone extension wired on inside of filtered face plate to living room socket, so this is filtered.
You need to login in order to vote
I think high is not enough to say… If that won’t get worse, I mean if you don’t loose fastpath I will add at least 1snr to downstream to increase line stability. With this amount of errors you barely have chance to get fastpath on downstream. Have you got filtered face plate mounted? Looking by amount of FEC errors I doubt.
Yeah I have a filtered face plate, open reach mk4.
You need to login in order to vote
[ Counters: Showtime ]
Near End Far End Note
ElapsedTime : 305944 305944 (seconds)
CRC : -1 4045
FEC : 37658444 53807
HEC : 0 0
CRC_P : -1 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 2645
SES : 3 31
LOSS : 0 1
UAS : 0 0
LOFS : 0 0
[ Counters: 15Min ]
Near End Far End Note
ElapsedTime : 569 569 (seconds)
CRC : 0 0
FEC : 2583210 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0
[ Counters: 1DAY ]
Near End Far End Note
ElapsedTime : 5069 5069 (seconds)
CRC : 0 0
FEC : 12746071 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0[ BAND INFORMATION ]
US:
Band=0, LATN= 6, SATN= 6, SNR= 7, Border=[ 9- 31], Limits=[ 6- 31]
Band=1, LATN= 29, SATN= 29, SNR= 6, Border=[ 882-1193], Limits=[ 882-1193]
Band=2, LATN= 45, SATN= 45, SNR= 6, Border=[1984-2770], Limits=[1984-2770]
DS:
Band=0, LATN= 14, SATN= 14, SNR= 5, Border=[ 33- 857], Limits=[ 33- 857]
Band=1, LATN= 36, SATN= 36, SNR= 5, Border=[1218-1959], Limits=[1218-1959]
Band=2, LATN= 56, SATN= 54, SNR= 6, Border=[2795-3619], Limits=[2795-3784]———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Near End Far End Note
Trellis : 1 1
Bitswap : 1 1
ReTxEnable : 0 0
VirtualNoise : 0 0
20BitSupport : 0 0
LatencyPath : 0 0
LOS : 4 0
LOF : 0 0
LPR : 0 0
LOM : 0 0
SosSuccess : 0 0
NCD : 0 0
LCD : 0 0
FECS : 38170553 53807 (seconds)
ES : 1 2645 (seconds)
SES : 0 31 (seconds)
LOSS : 0 1 (seconds)
UAS : 33 80427 (seconds)
HECError : 0 0
CRC : 1 4045
RsCorrection : 0 0
INP : 0 40 (symbols)
InterleaveDelay : 0 1500 (1/100 ms)
NFEC : 255 61
RFEC : 16 16
LSYMB : 2862 11974
INTLVBLOCK : 255 61
AELEM : 0 —-You need to login in order to vote
-
AuthorPosts
