Reply To: RT-AC86U 384.16 Hi, I updated to the latest Merlin firmware this morning (about 9 am) and since doing so my NE CRC count has gone up to 326598 over 5 hours. …

[Bully]

My filtered faceplate was only fitted a couple of months ago by a BT engineer.

 

xdslcmd info –stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 12016 Kbps, Downstream rate = 38900 Kbps
Bearer: 0, Upstream rate = 11858 Kbps, Downstream rate = 35934 Kbps

Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 7.0 6.2
Attn(dB): 19.6 0.0
Pwr(dBm): 12.8 6.7
VDSL2 framing
Bearer 0
MSGc: 18 22
B: 51 238
M: 1 1
T: 64 33
R: 12 16
S: 0.0460 0.6413
L: 11120 3181
D: 703 1
I: 64 255
N: 64 255
Counters
Bearer 0
OHF: 4300478 1202601
OHFErr: 423 0
RS: 1100836737 2033149
RSCorr: 4945606 0
RSUnCorr: 11905 0

Bearer 0
HEC: 2908 0
OCD: 158 0
LCD: 158 0
Total Cells: 879047428 0
Data Cells: 41049060 0
Drop Cells: 0
Bit Errors: 0 0

ES: 231 2655
SES: 0 31
UAS: 25 86716
AS: 12723

Bearer 0
INP: 3.00 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 2.95 10.62
OR: 64.90 21.08
AgR: 35999.37 11879.22

Bitswap: 7820/7852 0/0

Total time = 3 hours 32 min 28 sec
FEC: 4945606 0
CRC: 423 0
ES: 231 2655
SES: 0 31
UAS: 25 86716
LOS: 0 1
LOF: 0 1
LOM: 0 0
Latest 15 minutes time = 2 min 28 sec
FEC: 95 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 2696939 0
CRC: 119 0
ES: 103 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 3 hours 32 min 28 sec
FEC: 4945606 0
CRC: 423 0
ES: 231 2655
SES: 0 31
UAS: 25 86716
LOS: 0 1
LOF: 0 1
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 3 hours 32 min 1 sec
FEC: 4945606 0
CRC: 423 0
ES: 231 2655
SES: 0 31
UAS: 0 86691
LOS: 0 1
LOF: 0 1
LOM: 0 0

DSLAM type / SW version: IFTN:0xd086 (208.134) / v0xd086
Modem/router firmware: AnnexA version – A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 3 hours 32 min 33 sec
Resyncs: 0 (since 08 May 2020 19:00:57)

Downstream Upstream
Line attenuation (dB): 19.6 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 35934 11858
SNR margin (dB): 7.0 6.1
Power (dBm): 12.8 6.7
Interleave depth: 703 1
INP: 3.00 0
G.INP: Not enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)

RSCorr/RS (%): 0.4482 0.0000
RSUnCorr/RS (%): 0.0011 0.0000
ES/hour: 0 0

xdslcmd profile –show

Modulations:
G.Dmt Disabled
G.lite Disabled
T1.413 Disabled
ADSL2 Disabled
AnnexL Disabled
ADSL2+ Disabled
AnnexM Disabled
VDSL2 Enabled
VDSL2 profiles:
8a Enabled
8b Enabled
8c Enabled
8d Enabled
12a Enabled
12b Enabled
17a Enabled
30a Enabled
US0 Enabled
Phone line pair:
Inner pair
Capability:
bitswap On
sra On
trellis On
sesdrop Off
CoMinMgn Off
24k On
phyReXmt(Us/Ds) Off/On
TpsTc AvPvAa
monitorTone: On
dynamicD: On
dynamicF: Off
SOS: On
Training Margin(Q4 in dB): -1(DEFAULT)

You need to login in order to vote