RT-AC86U 384.16 Hi, I updated to the latest Merlin firmware this morning (about 9 am) and since doing so my NE CRC count has gone up to 326598 over 5 hours. ...

[UK Sentinel]

Did access Problem only started after you used second cable option ?

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[Bully]

Yeah, well not sure because i setup second cable option straight after i updated router firmware.

You need to login in order to vote

[Mrk26]

Agree with @Uk Sentinel, even you get different modem with broadcom chipset is not guarantee any better than you got now. Dsl-ac88u have really good chipset for Vdsl connection, but only that. On my line modem with lantiq chipset sync about 3-4Mb faster than any broadcom based modem. Even famous zyxel VMG1312-B10A sync lower than any lantiq based modem I tried on my line. Also if you get fastpath on downstream lantiq based modem is better as FEC are still on downstream which help reduce CRC (at least in my case) especially where you are on ECI cabinet. This is what G.inp enable on Huawei cabinet on broadcom based modems. I think HG612 maybe good to mantain line till you get fastpath, and then you maybe able to switch back to vigor, this is how I used to do with zyxel.

You need to login in order to vote

[Mrk26]

Bully wrote:

Yeah, well not sure because i setup second cable option straight after i updated router firmware.

Did you reboot router after you configure second cable option.

You need to login in order to vote

[UK Sentinel]

Bully wrote:

Yeah, well not sure because i setup second cable option straight after i updated router firmware.

Second cable option was probable the cause, go back to what works, for now

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[UK Sentinel]

Fastpath I do not think will happen with your amount of errors – so the speed you get, will probable not change until underlying line noise / faceplate(possible damage)  is addressed.

In a completely sane world, madness is the only freedom (J.G.Ballard).

Liked by:

You need to login in order to vote

[Bully]

UK Sentinel wrote:

Bully wrote:

Yeah, well not sure because i setup second cable option straight after i updated router firmware.

Second cable option was probable the cause, go back to what works, for now

 

I have gone back to what was working, but still cannot login to router via its ip address.

You need to login in order to vote

[UK Sentinel]

Did you change Router IP / WAN address to Automatic, or back to manual, I forget ?

If Manual try 192.168.1.2 to access router, as you have changed a few settings and not sure where we are etc. especially if router was not rebooted after config changes etc ?

 

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[Mrk26]

UK Sentinel wrote:

Fastpath I do not think will happen with your amount of errors – so the speed you get, will probable not change until underlying line noise / faceplate is addressed.

Totally agree, I will disconnect telephone line extension and give couple of hours(literally couple) and see how stats looks like, if that’s the case it will show up immediately. If @Bully keep amount of disconnections below 10 per day DLM shouldn’t action.

You need to login in order to vote

[UK Sentinel]

Mrk26 wrote:

UK Sentinel wrote:

Fastpath I do not think will happen with your amount of errors – so the speed you get, will probable not change until underlying line noise / faceplate is addressed.

Totally agree, I will disconnect telephone line extension and give couple of hours(literally couple) and see how stats looks like, if that’s the case it will show up immediately. If @Bully keep amount of disconnections below 10 per day DLM shouldn’t action.

  so you think modem is disconnecting multiple times during the day (I am a little lost) ?

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[Mrk26]

No, I mean, if modem need to be disconnected, it can be few times during the day but less than 10 times. Like swapping modems, change socket etc.

I was agree about noise and possibly faulty faceplate, I may be wrong but if @Bully had worse results on extension phone this mean for me that filtered signal is not filtered properly.

You need to login in order to vote

[Bully]

Ui on Asus keeps going funny ? –

 

Attachments:

1. 

   Asus-ui-2020-05-02-153410.png
   

You need to login in order to vote

[Mrk26]

Try to clear cache, or different browser.

You need to login in order to vote

[UK Sentinel]

Mrk26 wrote:

No, I mean, if modem need to be disconnected, it can be few times during the day but less than 10 times. Like swapping modems, change socket etc

I see, and yes, a few times and DLM will not punish you for disconnects

 

Mrk26 wrote:

. I was agree about noise and possibly faulty faceplate, I may be wrong but if @Bully had worse results on extension phone this mean for me that filtered signal is not filtered properly.

My thoughts also and/or inferior phone cable

In a completely sane world, madness is the only freedom (J.G.Ballard).

Liked by:

You need to login in order to vote

[UK Sentinel]

Bully wrote:

Ui on Asus keeps going funny ? –

Or reboot router / laptop

In a completely sane world, madness is the only freedom (J.G.Ballard).

You need to login in order to vote

[Author]

Posts