[Nicky]

Thank you.

I’m not aware of anything maxing out. I’ve attached a screenshot of the current status.

 

Attachments:

1. 

   Screenshot.jpg
   

You need to login in order to vote

[Nicky]

This is a first for me.

I saw this in the system logs, can anyone tell me what’s going on here please?

Mar 22 02:20:34 kernel: CPU: 2 PID: 1765 Comm: asd Tainted: P O 4.1.52 #2
Mar 22 02:20:34 kernel: Hardware name: Generic DT based system
Mar 22 02:20:34 kernel: task: d91b8400 ti: d19b0000 task.ti: d19b0000
Mar 22 02:20:34 kernel: PC is at 0xb6902ec0
Mar 22 02:20:34 kernel: LR is at 0xb6903bb0
Mar 22 02:20:34 kernel: pc : [<b6902ec0>] lr : [<b6903bb0>] psr: 80000010
Mar 22 02:20:34 kernel: sp : beeb1340 ip : b6917150 fp : b69061f8
Mar 22 02:20:34 kernel: r10: 00024164 r9 : b69060c0 r8 : 00000000
Mar 22 02:20:34 kernel: r7 : 0171cb40 r6 : 0171c9c0 r5 : beeb1360 r4 : 017202c0
Mar 22 02:20:34 kernel: r3 : b65016c8 r2 : 00000000 r1 : 00000080 r0 : 00000000
Mar 22 02:20:34 kernel: Flags: Nzcv IRQs on FIQs on Mode USER_32 ISA ARM Segment user
Mar 22 02:20:34 kernel: Control: 10c5387d Table: 118ac04a DAC: 00000015
Mar 22 02:20:34 kernel: CPU: 2 PID: 1765 Comm: asd Tainted: P O 4.1.52 #2
Mar 22 02:20:34 kernel: Hardware name: Generic DT based system
Mar 22 02:20:34 kernel: [<c00270a0>] (unwind_backtrace) from [<c0022cf8>] (show_stack+0x10/0x14)
Mar 22 02:20:34 kernel: [<c0022cf8>] (show_stack) from [<c04c76bc>] (dump_stack+0x8c/0xa0)
Mar 22 02:20:34 kernel: [<c04c76bc>] (dump_stack) from [<c003ad2c>] (get_signal+0x490/0x558)
Mar 22 02:20:34 kernel: [<c003ad2c>] (get_signal) from [<c0022290>] (do_signal+0xc8/0x3ac)
Mar 22 02:20:34 kernel: [<c0022290>] (do_signal) from [<c0022718>] (do_work_pending+0x94/0xa4)
Mar 22 02:20:34 kernel: [<c0022718>] (do_work_pending) from [<c001f58c>] (work_pending+0xc/0x20)
Mar 22 02:25:59 rc_service: service 20703:notify_rc restart_firewall

You need to login in order to vote

[Nicky]

dodgydrains wrote:

Nicky wrote:

Are all your devices showing on your list with 3.0.0.4.388_22525. I’m getting devices not showing, both wireless and wired, even though they are operating properly and I’m also getting devices dropping off the list and reappearing moments later, but they too are all operating normally?

Not something that I have noticed. I did do a full factory reset in the evening after the intial dirty flash update.

dodgydrains wrote:

Nicky wrote:

Are all your devices showing on your list with 3.0.0.4.388_22525. I’m getting devices not showing, both wireless and wired, even though they are operating properly and I’m also getting devices dropping off the list and reappearing moments later, but they too are all operating normally?

Not something that I have noticed. I did do a full factory reset in the evening after the intial dirty flash update.

That’s something I’ve not done yet because it can be such a ball ache, but something I know I will eventually need to do.

You need to login in order to vote

[Nicky]

Are all your devices showing on your list with 3.0.0.4.388_22525. I’m getting devices not showing, both wireless and wired, even though they are operating properly and I’m also getting devices dropping off the list and reappearing moments later, but they too are all operating normally?

You need to login in order to vote

[Nicky]

I’ve had another router crash this evening and when it recovered a number of my 2.4GHz devices refused to connect. I done a power cycle of the router and all the nodes and still they wouldn’t connect, so I regreased back from “3.0.0.4.388_21617 ” to “3.0.0.4.386_49873-g72159cc” and everything came back online?

Looks like I’ll be sticking with “3.0.0.4.386_49873-g72159cc” until Asus sort things out.

Just a though, but up until now all the firmware upgrades had been stable, until they added the new VPN and wire guard settings. Could that be the issue?

Liked by:

You need to login in order to vote

[Nicky]

Not such a good day today. The router done a random reboot at 15:11 (GMT) and then wouldn’t connect to all wireless devices, so I had to power cycle the router.  All seems ok for the moment.

I’ve sent to logs to ASUS via the feedback tab.

 

The system setup is: 2x ZenWiFi XT8 (1x main router, 1x node) Firmware Version:3.0.0.4.388_21617 + 2x ZenWiFi Mini AX1800 (2x nodes) Firmware Version 3.0.0.4.386_49599 with hardwire Backhaul to all nodes.

Liked by:

You need to login in order to vote

[Nicky]

Well it’s been 24 hours and all seams stable. The system has been under fairly heavy load today, with around 90GB of internet traffic plus around 350GB of internal traffic. The Router’s RAM has dropped to 80MB and no devices have been noticed to have lost connection.

That said, the system log does repeatedly show that 2 devices were disconnected because the sending station was leaving or had left but was then immediately reconnected.

The system setup is: 2x ZenWiFi XT8 (1x main router, 1x node) Firmware Version:3.0.0.4.388_21617 + 2x ZenWiFi Mini AX1800 (2x nodes) Firmware Version 3.0.0.4.386_49599 with hardwire Backhaul to all nodes.

You need to login in order to vote

[Nicky]

Well, it’s been up for 10 hours (overnight) with no issues. All 72 devices are now listed and the RAM appears to have stabilised at 99MB.

Let’s see how the day goes.

 

The system setup is: 2x ZenWiFi (Firmware Version:3.0.0.4.388_21617) + 2x ZenWiFi Mini’s (Firmware Version 3.0.0.4.386_49599) with hardwire Backhaul to all nodes.

Liked by:

You need to login in order to vote

[Nicky]

Well here goes nothing. Just upgraded to Firmware Version:3.0.0.4.388_21617. I took it’s time to settle down. 68 of the 72 devices shown in the list, but that’s not unusual, it can take a while for all devices to show on the list. Initial memory free was 82MB but after about 30 minutes it increased to 117/118MB.

So fingers crossed and let’s see how it fairs overnight?

The system setup is: 2x ZenWiFi (Firmware Version:3.0.0.4.388_21617) + 2x ZenWiFi Mini’s (Firmware Version 3.0.0.4.386_49599) with hardwire Backhaul to all nodes.

Liked by:

You need to login in order to vote

[Nicky]

You need to login in order to vote

[Nicky]

That sounds promising. Are you getting any 2.4 GHz disconnect issues?

You need to login in order to vote

[Nicky]

Why are they still pushing “FW_ZENWIFI_XT8_300438821099” out via the router’s firmware upgrade option when they know there are issues with it?

I upgraded to “FW_ZENWIFI_XT8_300438821099” last week and had all kinds of stability issues, including devises no being able to connect to the router via wifi, so I regressed back to “FW_ZENWIFI_XT8_300438649873”. Now everything is back normal.

Liked by:

You need to login in order to vote

[Author]

Posts