[ampthetex]

I connected via the 5G WiFi insead of the 2.4GHz and bingo we’re back in business.

Share the knowledge

You need to login in order to vote

[ampthetex]

I reset the box, hard reset on the box, let it find an uplink, then started the wizard, it went through, left it while I did the dishes come back and the exclamation mark had gone, and we was on, but Im getting less than 20mbps, when it should be around 66mbps.

Thanks for the advice

Share the knowledge

You need to login in order to vote

[ampthetex]

UK Sentinel wrote:

Try the other options in my above post, especially the MTU etc?

Ok, I shall give them a blast.

Share the knowledge

Liked by:

You need to login in order to vote

[ampthetex]

I sniffed the details out using wireshark IIRC.

Share the knowledge

You need to login in order to vote

[ampthetex]

I tried with stock firmware that was posted few links back, but that was also saying link down on the dsl, so I reset router to factory, then flashed it with beta, held reset for about 15 seconds, then went through everything, and it was talking to the line, as I could see the data moving, through the uplink. How do I go about the option 61 string, as I have read it must be in HEX?, etc. I did try to convert it online to hex, and put that in but still the same.

Share the knowledge

You need to login in order to vote

[ampthetex]

Right, Ive flashed it, reset it, flashed it, and reset it about half a dozen times lol. I have managed to get it to see the DSL connection with the beta firmware, and its showing data going back and forth.

But, it says no internet, so Im thinking its an authentication problem, Ive tried using the DHCP box, and using the option 60, and even option 61 which I sniffed out from the Sky router, but still nothing.

 

Here’s my log from when I had some sort of connection

2011-01-01 00:01:05 [Informational] stop_nat_rules: apply the redirect_rules!
2011-01-01 00:01:06 [Informational] kernel: Firmware version=[v9.1.2.3]
2011-01-01 00:01:07 [Informational] kernel: Link State: DSL link up.
2011-01-01 00:01:07 [Informational] kernel: tc3262_ptm_close
2011-01-01 00:01:07 [Informational] kernel: usbcore: registered new interface driver usbfs
2011-01-01 00:01:07 [Informational] kernel: usbcore: registered new interface driver hub
2011-01-01 00:01:07 [Informational] kernel: usbcore: registered new device driver usb
2011-01-01 00:01:07 [Notice] kernel: SCSI subsystem initialized
2011-01-01 00:01:08 [Informational] kernel: Initializing USB Mass Storage driver…
2011-01-01 00:01:08 [Informational] kernel: usbcore: registered new interface driver usb-storage
2011-01-01 00:01:08 [Informational] kernel: USB Mass Storage support registered.
2011-01-01 00:01:09 [Notice] kernel: ufsd:: trace mask set to 0000000f
2011-01-01 00:01:09 [Notice] kernel: ufsd: driver (UFSD_HEAD lke_8.9.0_r209178_b9, LBD=ON, acl, ioctl, sd, wb, tr) loaded at c02f1000
2011-01-01 00:01:09 [Informational] kernel: NTFS support included
2011-01-01 00:01:09 [Informational] kernel: Big endian platform
2011-01-01 00:01:09 [Informational] kernel: optimized: speed
2011-01-01 00:01:09 [Informational] kernel: Build_for__ASUS_PRODUCTS_001_k2.6.22.15_2012-12-24_lke_8.9.0_r209178_b9
2011-01-01 00:01:09 [Informational] kernel:
2011-01-01 00:01:10 [Informational] kernel: PCI: Enabling device 0000:02:03.3 (0000 -> 0002)
2011-01-01 00:01:10 [Informational] kernel: ehci_hcd 0000:02:03.3: EHCI Host Controller
2011-01-01 00:01:10 [Informational] kernel: ehci_hcd 0000:02:03.3: new USB bus registered, assigned bus number 1
2011-01-01 00:01:10 [Informational] kernel: ehci_hcd 0000:02:03.3: irq 21, io mem 0x1fba1000
2011-01-01 00:01:10 [Informational] kernel: ehci_hcd 0000:02:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
2011-01-01 00:01:10 [Informational] kernel: usb usb1: configuration #1 chosen from 1 choice
2011-01-01 00:01:10 [Informational] kernel: hub 1-0:1.0: USB hub found
2011-01-01 00:01:10 [Informational] kernel: hub 1-0:1.0: 2 ports detected
2011-01-01 00:01:10 [Debug] kernel: ohci_hcd: 2006 August 04 USB 1.1 ‘Open’ Host Controller (OHCI) Driver
2011-01-01 00:01:10 [Informational] kernel: PCI: Enabling device 0000:02:03.0 (0000 -> 0002)
2011-01-01 00:01:10 [Debug] kernel: PCI: Setting latency timer of device 0000:02:03.0 to 64
2011-01-01 00:01:10 [Informational] kernel: ohci_hcd 0000:02:03.0: OHCI Host Controller
2011-01-01 00:01:10 [Informational] kernel: ohci_hcd 0000:02:03.0: new USB bus registered, assigned bus number 2
2011-01-01 00:01:10 [Informational] kernel: ohci_hcd 0000:02:03.0: irq 24, io mem 0x1fba0000
2011-01-01 00:01:11 [Informational] kernel: usb usb2: configuration #1 chosen from 1 choice
2011-01-01 00:01:11 [Informational] kernel: hub 2-0:1.0: USB hub found
2011-01-01 00:01:11 [Informational] kernel: hub 2-0:1.0: 2 ports detected
2011-01-01 00:01:11 [Informational] kernel: usbcore: registered new interface driver usblp
2011-01-01 00:01:11 [Informational] kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
2011-01-01 00:01:13 [Informational] kernel: tc3262_ptm_close
2011-01-01 00:01:13 [Informational] kernel: usbcore: registered new interface driver asix
2011-01-01 00:01:13 [Informational] kernel: nas8: starting interface.
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver cdc_ether
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver rndis_host
2011-01-01 00:01:14 [Informational] kernel: cdc_ncm: 14-Mar-2012
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver cdc_ncm
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver cdc_wdm
2011-01-01 00:01:14 [Informational] kernel: cdc_mbim: loaded
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver cdc_mbim
2011-01-01 00:01:15 [Informational] rstats[2666]: [start rstats]
2011-01-01 00:01:24 [Debug] kernel: nas8: no IPv6 routers present
2011-01-01 00:01:26 [Informational] kernel: [wan_execute]cur_vc=0, isAdslOrVdsl=2
2011-01-01 00:01:26 [Debug] kernel: nas8_0: no IPv6 routers present
2011-01-01 00:02:49 [Informational] kernel: new sra = on
2011-01-01 00:02:49 [Informational] kernel: US bitswap on,DS bitswap on
2011-01-01 00:02:49 [Informational] kernel: Set SNRM OFFSET = 0.0 db
2011-01-01 00:02:49 [Informational] kernel: Set Agc Vref1 = 65535 ; Vref2 = 65535 ; Vref3 = 65535
2011-01-01 00:02:49 [Informational] kernel: new target_snrm = 32767
2011-01-01 00:02:49 [Informational] kernel: PROFILE30A_MULTI_MODE
2011-01-01 00:02:49 [Informational] kernel: new agc_ref = 65535,65535,65535,65535
2011-01-01 00:02:49 [Informational] kernel: cur upbo =1
2011-01-01 00:02:49 [Informational] kernel: usage: wan vdsl2 set upbo [on|off]
2011-01-01 00:02:49 [Informational] kernel: New sync sym update flag :OFF
2011-01-01 00:02:49 [Informational] kernel: PHYR_NONE mode
2011-01-01 00:02:49 [Informational] kernel: ANNEXAIJLM
2011-01-01 00:02:50 [Informational] kernel: new sra = on
2011-01-01 00:02:50 [Informational] kernel: US bitswap on,DS bitswap on
2011-01-01 00:02:50 [Informational] kernel: Set SNRM OFFSET = 0.0 db
2011-01-01 00:02:50 [Informational] kernel: Set Agc Vref1 = 65535 ; Vref2 = 65535 ; Vref3 = 65535
2011-01-01 00:02:50 [Informational] kernel: new target_snrm = 32767
2011-01-01 00:02:50 [Informational] kernel: PROFILE30A_MULTI_MODE
2011-01-01 00:02:50 [Informational] kernel: new agc_ref = 65535,65535,65535,65535
2011-01-01 00:02:50 [Informational] kernel: cur upbo =1
2011-01-01 00:02:50 [Informational] kernel: usage: wan vdsl2 set upbo [on|off]
2011-01-01 00:02:50 [Informational] kernel: New sync sym update flag :OFF
2011-01-01 00:02:50 [Informational] kernel: G.inp mode
2011-01-01 00:02:51 [Informational] kernel: ANNEXAIJLM
2011-01-01 00:02:52 [Informational] kernel: Link State: DSL link down.
2011-01-01 00:02:59 [Informational] WAN Connection: Wan link down.
2011-01-01 00:03:38 [Informational] WEB: Configuration changed: SysInfo_Entry
2011-01-01 00:03:43 [Informational] WEB: Configuration changed: Account_Entry0
2011-01-01 00:03:43 [Informational] Samba Server: smb daemon is stoped
2011-01-01 00:03:43 [Informational] FTP Server: daemon is stoped
2011-01-01 00:03:44 [Informational] WEB: Configuration changed: SysInfo_Entry
2011-01-01 00:03:44 [Informational] kernel:
2011-01-01 00:03:45 [Informational] kernel:
2011-01-01 00:03:45 [Informational] kernel: WPSActiveStatus = NULL
2011-01-01 00:03:45 [Informational] kernel: WPSOOBActive = NULL
2011-01-01 00:03:45 [Informational] kernel: ReCounterActive = NULL
2011-01-01 00:03:45 [Informational] kernel: WPSGenPinCode = NULL
2011-01-01 00:03:45 [Informational] kernel: write_wlan_AutoChannelSkipList -(0x20)
2011-01-01 00:03:45 [Informational] kernel: write_wlan_AutoChannelSkipList – (DE)(0x8)
2011-01-01 00:03:45 [Informational] kernel:
2011-01-01 00:03:45 [Informational] kernel: Net device ra00_0 going down….
2011-01-01 00:03:45 [Informational] kernel: rlk_inic_mbss_close —>
2011-01-01 00:03:45 [Informational] kernel: rlk_inic_mbss_close <—
2011-01-01 00:03:45 [Informational] kernel: iNIC Closed
2011-01-01 00:03:46 [Informational] kernel: Net device ra01_0 going down….
2011-01-01 00:03:46 [Informational] kernel: rlk_inic_mbss_close —>
2011-01-01 00:03:46 [Informational] kernel: setup MBSS[0] success
2011-01-01 00:03:46 [Informational] kernel: all interfaces closed.
2011-01-01 00:03:46 [Informational] kernel: rlk_inic_mbss_close <—
2011-01-01 00:03:46 [Informational] kernel: iNIC Closed
2011-01-01 00:03:46 [Informational] kernel: Delete HeartBeatTimer ….
2011-01-01 00:03:47 [Informational] kernel: iNIC Open ra00_0
2011-01-01 00:03:47 [Informational] kernel: Op mode = 1
2011-01-01 00:03:47 [Informational] kernel: Read profile[0]
2011-01-01 00:03:47 [Informational] kernel: BssidNum=4
2011-01-01 00:03:47 [Informational] kernel: Read profile[1]
2011-01-01 00:03:47 [Informational] kernel: BssidNum=4
2011-01-01 00:03:47 [Informational] kernel: Wait for boot done…
2011-01-01 00:03:49 [Informational] kernel: RACFG_CMD_BOOT_NOTIFY
2011-01-01 00:04:10 [Informational] kernel: Open file: /etc/Wireless/RT6856/iNIC.bin
2011-01-01 00:04:10 [Informational] kernel: RACFG_CMD_BOOT_INITCFG(1)
2011-01-01 00:04:10 [Informational] kernel: RACFG_CMD_BOOT_UPLOAD(0)
2011-01-01 00:04:10 [Informational] kernel: RACFG_CMD_BOOT_UPLOAD(0)
2011-01-01 00:04:10 [Informational] kernel: RACFG_CMD_BOOT_UPLOAD(1)
2011-01-01 00:04:10 [Informational] kernel: RACFG_CMD_BOOT_UPLOAD(2)
2011-01-01 00:04:10 [Informational] kernel:
2011-01-01 00:04:10 [Informational] kernel: CRC:01 08 14 18 58 45 b1 4f 22 32 2e 35 2e 33 2e 34 22 00 00 00 32 30 31 32 30 34 31 30 00 00 00 00 00 00 00 00 24 8e 00 00
2011-01-01 00:04:10 [Informational] kernel: RACFG_CMD_BOOT_STARTUP
2011-01-01 00:04:10 [Informational] kernel: RACFG_CMD_BOOT_NOTIFY
2011-01-01 00:04:10 [Informational] kernel: Open file: /etc/Wireless/RT6856/iNIC_ap.bin
2011-01-01 00:04:10 [Informational] Samba Server: daemon is started
2011-01-01 00:04:12 [Informational] kernel: tc3262_ptm_close
2011-01-01 00:04:13 [Error] smbd[4451]: [2011/01/01 00:04:13, 0] auth/auth_util.c:get_root_nt_token(501)
2011-01-01 00:04:13 [Error] smbd[4451]: get_root_nt_token: getpwnam”root”) failed!
2011-01-01 00:04:13 [Error] smbd[4451]: [2011/01/01 00:04:13, 0] auth/auth_util.c:get_root_nt_token(501)
2011-01-01 00:04:13 [Error] smbd[4451]: get_root_nt_token: getpwnam”root”) failed!
2011-01-01 00:04:13 [Error] smbd[4451]: [2011/01/01 00:04:13, 0] services/services_db.c:svcctl_init_keys(420)
2011-01-01 00:04:13 [Error] smbd[4451]: svcctl_init_keys: key lookup failed! (WERR_ACCESS_DENIED)
2011-01-01 00:04:15 [Informational] kernel: [smuxctl rem nas8_X]
2011-01-01 00:04:24 [Informational] kernel: nas8: starting interface.
2011-01-01 00:04:25 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:04:25 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:04:25 [Informational] WEB: Configuration changed: Wan_PVC
2011-01-01 00:04:25 [Informational] kernel: generate miniupnpd.conf
2011-01-01 00:04:25 [Informational] kernel: launch upnp
2011-01-01 00:04:25 [Informational] kernel: start_miniupnpd. force(1)
2011-01-01 00:04:25 [Informational] kernel: stop upnp first
2011-01-01 00:04:25 [Informational] kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
2011-01-01 00:04:25 [Informational] WEB: Configuration changed: Upnpd_Entry
2011-01-01 00:04:25 [Informational] WEB: Configuration changed: LanguageSwitch_Entry
2011-01-01 00:04:27 [Debug] kernel: nas8: no IPv6 routers present
2011-01-01 00:04:28 [Debug] kernel: nas8_0: no IPv6 routers present
2011-01-01 00:04:56 [Error] nmbd[4441]: [2011/01/01 00:04:56, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396)
2011-01-01 00:04:56 [Error] nmbd[4441]: *****
2011-01-01 00:04:56 [Error] nmbd[4441]:
2011-01-01 00:04:56 [Error] nmbd[4441]: Samba name server DSL-N66U is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.1
2011-01-01 00:04:56 [Error] nmbd[4441]:
2011-01-01 00:04:56 [Error] nmbd[4441]: *****
2011-01-01 00:05:43 [Informational] WEB: User [admin] logged in from [192.168.1.2] via WEB
2011-01-01 00:08:07 [Informational] kernel: tc3262_ptm_close
2011-01-01 00:08:09 [Informational] kernel: [smuxctl rem nas8_X]
2011-01-01 00:08:11 [Informational] kernel: nas8: starting interface.
2011-01-01 00:08:15 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:08:15 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:08:15 [Informational] kernel: generate miniupnpd.conf
2011-01-01 00:08:15 [Informational] kernel: launch upnp
2011-01-01 00:08:15 [Informational] kernel: start_miniupnpd. force(1)
2011-01-01 00:08:15 [Informational] kernel: stop upnp first
2011-01-01 00:08:16 [Informational] kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
2011-01-01 00:08:16 [Informational] WEB: Configuration changed: Route
2011-01-01 00:08:22 [Debug] kernel: nas8: no IPv6 routers present
2011-01-01 00:08:22 [Debug] kernel: nas8_0: no IPv6 routers present
2011-01-01 00:08:45 [Informational] WEB: User [admin] logged in from [192.168.1.2] via WEB
2011-01-01 00:09:57 [Informational] kernel: check_log_path: [AccessLog]
2011-01-01 00:01:15 [Informational] syslogd started: BusyBox v1.00 (2018.11.12-18:25+0000)
2011-01-01 00:01:16 [Informational] WAN Connection: Wan link down.
2011-01-01 00:01:18 [Informational] stop_nat_rules: apply the redirect_rules!
2011-01-01 00:01:18 [Informational] kernel: Firmware version=[v9.1.2.3]
2011-01-01 00:01:20 [Informational] kernel: usbcore: registered new interface driver usbfs
2011-01-01 00:01:20 [Informational] kernel: usbcore: registered new interface driver hub
2011-01-01 00:01:20 [Informational] kernel: usbcore: registered new device driver usb
2011-01-01 00:01:20 [Notice] kernel: SCSI subsystem initialized
2011-01-01 00:01:21 [Informational] kernel: Initializing USB Mass Storage driver…
2011-01-01 00:01:21 [Informational] kernel: usbcore: registered new interface driver usb-storage
2011-01-01 00:01:21 [Informational] kernel: USB Mass Storage support registered.
2011-01-01 00:01:22 [Debug] kernel: nas8: no IPv6 routers present
2011-01-01 00:01:22 [Notice] kernel: ufsd:: trace mask set to 0000000f
2011-01-01 00:01:22 [Notice] kernel: ufsd: driver (UFSD_HEAD lke_8.9.0_r209178_b9, LBD=ON, acl, ioctl, sd, wb, tr) loaded at c0302000
2011-01-01 00:01:22 [Informational] kernel: NTFS support included
2011-01-01 00:01:22 [Informational] kernel: Big endian platform
2011-01-01 00:01:22 [Informational] kernel: optimized: speed
2011-01-01 00:01:22 [Informational] kernel: Build_for__ASUS_PRODUCTS_001_k2.6.22.15_2012-12-24_lke_8.9.0_r209178_b9
2011-01-01 00:01:22 [Informational] kernel:
2011-01-01 00:01:23 [Debug] kernel: nas8_0: no IPv6 routers present
2011-01-01 00:01:23 [Informational] kernel: PCI: Enabling device 0000:02:03.3 (0000 -> 0002)
2011-01-01 00:01:23 [Informational] kernel: ehci_hcd 0000:02:03.3: EHCI Host Controller
2011-01-01 00:01:23 [Informational] kernel: ehci_hcd 0000:02:03.3: new USB bus registered, assigned bus number 1
2011-01-01 00:01:23 [Informational] kernel: ehci_hcd 0000:02:03.3: irq 21, io mem 0x1fba1000
2011-01-01 00:01:23 [Informational] kernel: ehci_hcd 0000:02:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
2011-01-01 00:01:23 [Informational] kernel: usb usb1: configuration #1 chosen from 1 choice
2011-01-01 00:01:23 [Informational] kernel: hub 1-0:1.0: USB hub found
2011-01-01 00:01:23 [Informational] kernel: hub 1-0:1.0: 2 ports detected
2011-01-01 00:01:24 [Debug] kernel: ohci_hcd: 2006 August 04 USB 1.1 ‘Open’ Host Controller (OHCI) Driver
2011-01-01 00:01:24 [Informational] kernel: PCI: Enabling device 0000:02:03.0 (0000 -> 0002)
2011-01-01 00:01:24 [Debug] kernel: PCI: Setting latency timer of device 0000:02:03.0 to 64
2011-01-01 00:01:24 [Informational] kernel: ohci_hcd 0000:02:03.0: OHCI Host Controller
2011-01-01 00:01:24 [Informational] kernel: ohci_hcd 0000:02:03.0: new USB bus registered, assigned bus number 2
2011-01-01 00:01:24 [Informational] kernel: ohci_hcd 0000:02:03.0: irq 24, io mem 0x1fba0000
2011-01-01 00:01:24 [Informational] kernel: usb usb2: configuration #1 chosen from 1 choice
2011-01-01 00:01:24 [Informational] kernel: hub 2-0:1.0: USB hub found
2011-01-01 00:01:24 [Informational] kernel: hub 2-0:1.0: 2 ports detected
2011-01-01 00:01:24 [Informational] kernel: usbcore: registered new interface driver usblp
2011-01-01 00:01:24 [Informational] kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
2011-01-01 00:01:25 [Informational] kernel: usbcore: registered new interface driver asix
2011-01-01 00:01:26 [Informational] kernel: usbcore: registered new interface driver cdc_ether
2011-01-01 00:01:26 [Informational] kernel: usbcore: registered new interface driver rndis_host
2011-01-01 00:01:26 [Informational] kernel: cdc_ncm: 14-Mar-2012
2011-01-01 00:01:26 [Informational] kernel: usbcore: registered new interface driver cdc_ncm
2011-01-01 00:01:27 [Informational] kernel: usbcore: registered new interface driver cdc_wdm
2011-01-01 00:01:27 [Informational] kernel: cdc_mbim: loaded
2011-01-01 00:01:27 [Informational] kernel: usbcore: registered new interface driver cdc_mbim
2011-01-01 00:01:27 [Informational] rstats[3131]: [start rstats]
2011-01-01 00:03:20 [Informational] WEB: User [admin] logged in from [192.168.1.2] via WEB
2011-01-01 00:06:50 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:06:50 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:06:50 [Informational] kernel: generate miniupnpd.conf
2011-01-01 00:06:50 [Informational] kernel: launch upnp
2011-01-01 00:06:50 [Informational] kernel: start_miniupnpd. force(1)
2011-01-01 00:06:50 [Informational] kernel: stop upnp first
2011-01-01 00:06:51 [Informational] kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
2011-01-01 00:06:51 [Informational] WEB: Configuration changed: Route
2011-01-01 00:07:31 [Informational] WEB: User [admin] logged in from [192.168.1.2] via WEB
2011-01-01 00:09:41 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:09:41 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:09:41 [Informational] kernel: generate miniupnpd.conf
2011-01-01 00:09:41 [Informational] kernel: launch upnp
2011-01-01 00:09:41 [Informational] kernel: start_miniupnpd. force(1)
2011-01-01 00:09:41 [Informational] kernel: stop upnp first
2011-01-01 00:09:42 [Informational] kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
2011-01-01 00:09:42 [Informational] WEB: Configuration changed: Route
2011-01-01 00:09:42 [Informational] kernel: log cicmd 0 (wan vdsl2 set sra on )
2011-01-01 00:09:42 [Informational] kernel: US bitswap on,DS bitswap on
2011-01-01 00:09:42 [Informational] kernel: Set SNRM OFFSET = 0.0 db
2011-01-01 00:09:42 [Informational] kernel: Set Agc Vref1 = 65535 ; Vref2 = 65535 ; Vref3 = 65535
2011-01-01 00:09:42 [Informational] kernel: log cicmd 1 (wan vdsl2 set target_snrm 32767 )
2011-01-01 00:09:44 [Informational] kernel: PROFILE30A_MULTI_MODE
2011-01-01 00:09:45 [Informational] kernel: log cicmd 2 (wan vdsl set agc 65535 65535 65535 65535 )
2011-01-01 00:09:46 [Informational] kernel: log cicmd 3 (wan vdsl set upbo 255 )
2011-01-01 00:09:46 [Informational] kernel: log cicmd 4 (wan vdsl set sync_sym off )
2011-01-01 00:09:46 [Informational] kernel: G.inp mode
2011-01-01 00:09:46 [Informational] kernel: ANNEXAIJLM
2011-01-01 00:09:46 [Informational] WEB: Configuration changed: Adsl_Entry
2011-01-01 00:10:07 [Informational] kernel: set cicmd 5
2011-01-01 00:10:07 [Informational] kernel: 1: wan vdsl2 set sra on
2011-01-01 00:10:07 [Informational] kernel: new sra = on
2011-01-01 00:10:07 [Informational] kernel: 2: wan vdsl2 set target_snrm 32767
2011-01-01 00:10:07 [Informational] kernel: new target_snrm = 32767
2011-01-01 00:10:07 [Informational] kernel: 3: wan vdsl set agc 65535 65535 65535 65535
2011-01-01 00:10:07 [Informational] kernel: new agc_ref = 65535,65535,65535,65535
2011-01-01 00:10:07 [Informational] kernel: upbo 255
2011-01-01 00:10:07 [Informational] kernel: cur upbo =1
2011-01-01 00:10:07 [Informational] kernel: usage: wan vdsl2 set upbo [on|off]
2011-01-01 00:10:07 [Informational] kernel: 5: wan vdsl set sync_sym off
2011-01-01 00:10:07 [Informational] kernel: New sync sym update flag :OFF
2011-01-01 00:10:57 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:10:57 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:10:57 [Informational] WEB: Configuration changed: Wan_PVC
2011-01-01 00:11:04 [Debug] kernel: nas8_1: no IPv6 routers present
2011-01-01 00:11:15 [Informational] WEB: User [admin] logged in from [192.168.1.2] via WEB
2011-01-01 00:12:50 [Debug] kernel: elan.1: add 33:33:00:00:00:01 mcast address to master interface
2011-01-01 00:12:50 [Debug] kernel: elan.1: add 01:00:5e:00:00:01 mcast address to master interface
2011-01-01 00:12:50 [Informational] kernel: elan.1: dev_set_promiscuity(master, 1)
2011-01-01 00:12:50 [Informational] kernel: device elan.1 entered promiscuous mode
2011-01-01 00:12:50 [Informational] kernel: br1: port 1(elan.1) entering learning state
2011-01-01 00:12:52 [Informational] kernel: device nas8_0 entered promiscuous mode
2011-01-01 00:12:52 [Informational] kernel: br1: port 2(nas8_0) entering learning state
2011-01-01 00:12:56 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:12:56 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:12:56 [Informational] kernel: generate miniupnpd.conf
2011-01-01 00:12:56 [Informational] kernel: launch upnp
2011-01-01 00:12:56 [Informational] kernel: start_miniupnpd. force(1)
2011-01-01 00:12:56 [Informational] kernel: stop upnp first
2011-01-01 00:12:57 [Informational] kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
2011-01-01 00:12:57 [Informational] WEB: Configuration changed: Route
2011-01-01 00:13:03 [Debug] kernel: nas8_0: no IPv6 routers present
2011-01-01 00:13:07 [Informational] kernel: br1: topology change detected, propagating
2011-01-01 00:13:07 [Informational] kernel: br1: port 1(elan.1) entering forwarding state
2011-01-01 00:13:07 [Informational] kernel: br1: topology change detected, propagating
2011-01-01 00:13:07 [Informational] kernel: br1: port 2(nas8_0) entering forwarding state
2011-01-01 00:13:55 [Informational] kernel: device nas8_0 left promiscuous mode
2011-01-01 00:13:55 [Informational] kernel: br1: port 2(nas8_0) entering disabled state
2011-01-01 00:13:56 [Informational] kernel: elan.1: dev_set_promiscuity(master, -1)
2011-01-01 00:13:56 [Informational] kernel: device elan.1 left promiscuous mode
2011-01-01 00:13:56 [Informational] kernel: br1: port 1(elan.1) entering disabled state
2011-01-01 00:13:56 [Debug] kernel: elan.1: del 01:00:5e:00:00:01 mcast address from vlan interface
2011-01-01 00:13:56 [Debug] kernel: elan.1: del 01:00:5e:00:00:01 mcast address from master interface
2011-01-01 00:13:56 [Debug] kernel: elan.1: del 33:33:00:00:00:01 mcast address from vlan interface
2011-01-01 00:13:56 [Debug] kernel: elan.1: del 33:33:00:00:00:01 mcast address from master interface
2011-01-01 00:14:04 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:14:04 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:14:04 [Informational] kernel: generate miniupnpd.conf
2011-01-01 00:14:04 [Informational] kernel: launch upnp
2011-01-01 00:14:04 [Informational] kernel: start_miniupnpd. force(1)
2011-01-01 00:14:04 [Informational] kernel: stop upnp first
2011-01-01 00:14:04 [Informational] kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
2011-01-01 00:14:04 [Informational] WEB: Configuration changed: Route
2011-01-01 00:14:10 [Debug] kernel: nas8_0: no IPv6 routers present
2011-01-01 00:00:59 [Informational] syslogd started: BusyBox v1.00 (2018.11.12-18:25+0000)
2011-01-01 00:01:00 [Informational] WAN Connection: Wan link down.
2011-01-01 00:01:01 [Warning] syslog: LCP: timeout sending Config-Requests
2011-01-01 00:01:01 [Notice] syslog: Connection terminated.
2011-01-01 00:01:01 [Notice] syslog: Modem hangup
2011-01-01 00:01:01 [Informational] syslog: LCP down.
2011-01-01 00:01:01 [Debug] kernel: vcc_sock_destruct: wmem leakage (2048 bytes) detected.
2011-01-01 00:01:02 [Informational] stop_nat_rules: apply the redirect_rules!
2011-01-01 00:01:03 [Informational] kernel: Firmware version=[v9.1.2.3]
2011-01-01 00:01:04 [Informational] kernel: usbcore: registered new interface driver usbfs
2011-01-01 00:01:05 [Informational] kernel: usbcore: registered new interface driver hub
2011-01-01 00:01:05 [Informational] kernel: usbcore: registered new device driver usb
2011-01-01 00:01:05 [Notice] kernel: SCSI subsystem initialized
2011-01-01 00:01:05 [Informational] kernel: Initializing USB Mass Storage driver…
2011-01-01 00:01:05 [Informational] kernel: usbcore: registered new interface driver usb-storage
2011-01-01 00:01:05 [Informational] kernel: USB Mass Storage support registered.
2011-01-01 00:01:05 [Informational] syslog: LCP is allowed to come up.
2011-01-01 00:01:05 [Informational] syslog: qos.txtp.pcr = qos.rxtp.pcr = 0
2011-01-01 00:01:05 [Debug] syslog: using channel 2
2011-01-01 00:01:05 [Informational] syslog: Using interface ppp0
2011-01-01 00:01:05 [Notice] syslog: Connect: ppp0 <–> 0.38
2011-01-01 00:01:06 [Notice] kernel: ufsd:: trace mask set to 0000000f
2011-01-01 00:01:06 [Notice] kernel: ufsd: driver (UFSD_HEAD lke_8.9.0_r209178_b9, LBD=ON, acl, ioctl, sd, wb, tr) loaded at c02f1000
2011-01-01 00:01:06 [Informational] kernel: NTFS support included
2011-01-01 00:01:06 [Informational] kernel: Big endian platform
2011-01-01 00:01:06 [Informational] kernel: optimized: speed
2011-01-01 00:01:06 [Informational] kernel: Build_for__ASUS_PRODUCTS_001_k2.6.22.15_2012-12-24_lke_8.9.0_r209178_b9
2011-01-01 00:01:06 [Informational] kernel:
2011-01-01 00:01:08 [Informational] kernel: PCI: Enabling device 0000:02:03.3 (0000 -> 0002)
2011-01-01 00:01:08 [Informational] kernel: ehci_hcd 0000:02:03.3: EHCI Host Controller
2011-01-01 00:01:08 [Informational] kernel: ehci_hcd 0000:02:03.3: new USB bus registered, assigned bus number 1
2011-01-01 00:01:08 [Informational] kernel: ehci_hcd 0000:02:03.3: irq 21, io mem 0x1fba1000
2011-01-01 00:01:08 [Informational] kernel: ehci_hcd 0000:02:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
2011-01-01 00:01:08 [Informational] kernel: usb usb1: configuration #1 chosen from 1 choice
2011-01-01 00:01:08 [Informational] kernel: hub 1-0:1.0: USB hub found
2011-01-01 00:01:08 [Informational] kernel: hub 1-0:1.0: 2 ports detected
2011-01-01 00:01:08 [Debug] kernel: ohci_hcd: 2006 August 04 USB 1.1 ‘Open’ Host Controller (OHCI) Driver
2011-01-01 00:01:08 [Informational] kernel: PCI: Enabling device 0000:02:03.0 (0000 -> 0002)
2011-01-01 00:01:08 [Debug] kernel: PCI: Setting latency timer of device 0000:02:03.0 to 64
2011-01-01 00:01:08 [Informational] kernel: ohci_hcd 0000:02:03.0: OHCI Host Controller
2011-01-01 00:01:08 [Informational] kernel: ohci_hcd 0000:02:03.0: new USB bus registered, assigned bus number 2
2011-01-01 00:01:08 [Informational] kernel: ohci_hcd 0000:02:03.0: irq 24, io mem 0x1fba0000
2011-01-01 00:01:08 [Informational] kernel: usb usb2: configuration #1 chosen from 1 choice
2011-01-01 00:01:08 [Informational] kernel: hub 2-0:1.0: USB hub found
2011-01-01 00:01:08 [Informational] kernel: hub 2-0:1.0: 2 ports detected
2011-01-01 00:01:08 [Informational] kernel: usbcore: registered new interface driver usblp
2011-01-01 00:01:08 [Informational] kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
2011-01-01 00:01:13 [Informational] kernel: usbcore: registered new interface driver asix
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver cdc_ether
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver rndis_host
2011-01-01 00:01:14 [Informational] kernel: cdc_ncm: 14-Mar-2012
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver cdc_ncm
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver cdc_wdm
2011-01-01 00:01:14 [Informational] kernel: cdc_mbim: loaded
2011-01-01 00:01:14 [Informational] kernel: usbcore: registered new interface driver cdc_mbim
2011-01-01 00:01:15 [Informational] rstats[2528]: [start rstats]
2011-01-01 00:01:16 [Informational] kernel: [boa_sslInit, 24]Generate new key.
2011-01-01 00:01:20 [Informational] kernel: [boa_sslInit, 35]Enabling SSL security system
2011-01-01 00:01:21 [Informational] kernel: [boa_sslInit, 84]SSL security system enabled
2011-01-01 00:01:37 [Warning] syslog: LCP: timeout sending Config-Requests
2011-01-01 00:01:37 [Notice] syslog: Connection terminated.
2011-01-01 00:01:37 [Notice] syslog: Modem hangup
2011-01-01 00:01:37 [Informational] syslog: LCP down.
2011-01-01 00:01:37 [Debug] kernel: vcc_sock_destruct: wmem leakage (2560 bytes) detected.
2011-01-01 00:01:40 [Informational] kernel:
2011-01-01 00:01:42 [Informational] syslog: LCP is allowed to come up.
2011-01-01 00:01:42 [Informational] syslog: qos.txtp.pcr = qos.rxtp.pcr = 0
2011-01-01 00:01:42 [Debug] syslog: using channel 3
2011-01-01 00:01:42 [Informational] syslog: Using interface ppp0
2011-01-01 00:01:42 [Notice] syslog: Connect: ppp0 <–> 0.38
2011-01-01 00:01:42 [Informational] kernel: Link State: DSL link up.
2011-01-01 00:01:43 [Informational] syslog: Terminating on signal 15
2011-01-01 00:01:43 [Informational] syslog: LCP down.
2011-01-01 00:01:45 [Debug] kernel: vcc_sock_destruct: wmem leakage (512 bytes) detected.
2011-01-01 00:01:45 [Informational] kernel: tc3262_ptm_close
2011-01-01 00:01:45 [Informational] kernel: tc3262_ptm_close
2011-01-01 00:01:45 [Informational] kernel: nas8: starting interface.
2011-01-01 00:01:48 [Informational] WAN Connection: ISP’s DHCP did not function properly.
2011-01-01 00:01:55 [Debug] kernel: nas8: no IPv6 routers present
2011-01-01 00:01:56 [Debug] kernel: nas8_0: no IPv6 routers present
2011-01-01 00:13:25 [Informational] WEB: User [admin] logged in from [192.168.1.2] via WEB
2011-01-01 00:17:19 [Informational] kernel: tc3262_ptm_close
2011-01-01 00:17:21 [Informational] kernel: [smuxctl rem nas8_X]
2011-01-01 00:17:26 [Informational] kernel: nas8: starting interface.
2011-01-01 00:17:26 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:17:26 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:17:26 [Informational] kernel: generate miniupnpd.conf
2011-01-01 00:17:26 [Informational] kernel: launch upnp
2011-01-01 00:17:26 [Informational] kernel: start_miniupnpd. force(1)
2011-01-01 00:17:26 [Informational] kernel: stop upnp first
2011-01-01 00:17:26 [Informational] kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
2011-01-01 00:17:26 [Informational] WEB: Configuration changed: Route
2011-01-01 00:17:33 [Debug] kernel: nas8_0: no IPv6 routers present
2011-01-01 00:17:34 [Debug] kernel: nas8: no IPv6 routers present
2011-01-01 00:19:25 [Informational] kernel: tc3262_ptm_close
2011-01-01 00:19:27 [Informational] kernel: [smuxctl rem nas8_X]
2011-01-01 00:19:28 [Informational] kernel: nas8: starting interface.
2011-01-01 00:19:32 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:19:32 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:19:32 [Informational] kernel: generate miniupnpd.conf
2011-01-01 00:19:32 [Informational] kernel: launch upnp
2011-01-01 00:19:32 [Informational] kernel: start_miniupnpd. force(1)
2011-01-01 00:19:32 [Informational] kernel: stop upnp first
2011-01-01 00:19:32 [Informational] kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
2011-01-01 00:19:32 [Informational] WEB: Configuration changed: Route
2011-01-01 00:19:39 [Debug] kernel: nas8: no IPv6 routers present
2011-01-01 00:19:40 [Debug] kernel: nas8_0: no IPv6 routers present
2011-01-01 00:20:39 [Informational] kernel: tc3262_ptm_close
2011-01-01 00:20:40 [Informational] kernel: [smuxctl rem nas8_X]
2011-01-01 00:20:45 [Informational] kernel: nas8: starting interface.
2011-01-01 00:20:46 [Informational] kernel: _enable_ewan_vlan_tag:disable
2011-01-01 00:20:46 [Informational] kernel: enable ewan vlan tag(0)
2011-01-01 00:20:46 [Informational] kernel: generate miniupnpd.conf
2011-01-01 00:20:46 [Informational] kernel: launch upnp
2011-01-01 00:20:46 [Informational] kernel: start_miniupnpd. force(1)
2011-01-01 00:20:46 [Informational] kernel: stop upnp first
2011-01-01 00:20:46 [Informational] kernel: /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf &
2011-01-01 00:20:46 [Informational] WEB: Configuration changed: Route
2011-01-01 00:20:52 [Debug] kernel: nas8: no IPv6 routers present
2011-01-01 00:20:53 [Debug] kernel: nas8_0: no IPv6 routers present

Share the knowledge

You need to login in order to vote

[ampthetex]

Hi, That is very kind of you, thank you.

Share the knowledge

You need to login in order to vote

[ampthetex]

You cant point me in the direction of the stock firmware can you please, they seem to not be on the ASUS site anymore.

 

Cheers

 

Steve

Share the knowledge

You need to login in order to vote

[ampthetex]

Hi, Yes. When it got to 100% and says complete, I go into other room, stick a paperclip in reset button hole for 5-10 secs, then release, then go back and when its all kicked back in I try to setup via wizard via long lan cable. I’m back using the Sky bog standard router at the moment, I’ll try again later on, and I’ll take some screenshots etc.

 

Cheers

 

Steve

Share the knowledge

You need to login in order to vote

[ampthetex]

Hi, I was wondering if you can help me out at all. I have Sky Fibre, I want to use my DSL-N66U with, it works with the last standard firmware from ASUS, and connects via its own on setup no problem, but the wifi is rubbish and keeps dropping out. Ive used the last two betas, the wifi is perfect but I cant for the life of me get the damn thing to connect. I used the beta versions with my old sky broadband before fibre, and it was perfect. When I reflash it with the last 2 betas it just says initialising…………then X and Link down. Whats been left out or changed between the original firmware and the betas that just doesnt want me to connect. When I go into setup wizard Ive chosen Sky, etc. Nothing

 

These are the betas

DSL-N66U_v9.1.2.3_502-g2bdb05b

DSL-N66U_v9.1.2.3_617-gfa1b634

Thanks in advance

Steve

Share the knowledge

You need to login in order to vote

[Author]

Posts