[Grisu]

Simply no.

And it is explicitly mentioned in AVM-help: https://service.avm.de/help/en/FRITZ-Box-7590/019/hilfe_internet_filter_listen

Dont know, but possibly AVM may use it to see whether your modem is up and running (at least online on your DSL-line) for MyFritz-Service.

You need to login in order to vote

[Grisu]

No contacts, sorry.

You need to login in order to vote

[Grisu]

You cant forward to an address outside your home subnet (must result in a failure)!

Of course I tried setting the rule for both UDP and TCP, each in a seperate rule and for IPv4 and IPv6.

You need to login in order to vote

[Grisu]

Not working with your workaround on my 7590 either.

Liked by:

You need to login in order to vote

[Grisu]

So 15 or 21 are room temperatures (night or holiday and normal when at home.
(admin Removed content)

You need to login in order to vote

[Grisu]

But why would someone heat a boiler to 15°C only?
He is speaking about boiler temp an not room temps.

Water has about 13-15°C when it enters the house, either drinking water from the street or ground water.
So there would be no need for heating it if you dont want it warmer than 15.

I realy dont understand what he is doing.
No complaints at all – only want to know what it is good for to learn other situations.

I have a heating pump too, but there is no sense for any boiler for it, it is working with ground water 13° in and 10° out.
If you dont oversize the pump it wont need any boiler with at least 1h working cycles using underfloor heating.
If you want to heat only one room or only parts you would need a boiler, but then you should heat it up to 25°C at least for longer pump cycles.
And for warm water we use 400l boiler with 50°C enough for 4 persons.

You need to login in order to vote

[Grisu]

What is a boiler with 15°C good for?
Too less for both heating or warm water.

Anywhat, maybe there is a setting in the boiler too where you can reduce max. temp to 15.

You need to login in order to vote

[Grisu]

Some FEC are ok as they will be corrected in the modem, but if they are lets say >1000 a minute you should work on it.

CRC are troublesome as they need retransmission.

You need to login in order to vote

[Grisu]

Why not just using MS Office built in tools from Office program folder?

scanpst.exe (for ost and pst)
scanost.exe (on office <2007)

Liked by:

You need to login in order to vote

[Grisu]

It is so easy to protect yourself!

NEVER EVER install apps or use links you got by SMS or email (and you didn’t explicitly ask for before)!!!

If you are asked to do so you may open a browser, login on the well known page and you will see if you are able to login in usual way, maybe you are asked to check and update your account details.
Or in case of apps you shall update, open the app directly on the device and have a look for updates. Or visit playstore (or similar) and manually search for updates of your installed and used apps.

Liked by:

You need to login in order to vote

[Grisu]

So why dont you get an original socket to replace your own NTE5C?

You can change back after repairing the line.

You need to login in order to vote

[Grisu]

Did you only make a reboot (by software) or turn off power for short time on ALL physically connected devices?
First might not reset HW completely to remove failure.
Do you use some kind of switch or PLC (PowerLine)?

Liked by:

You need to login in order to vote

[Grisu]

New Labor-versions available, working fine for me on 7590.

OS 7.39-labor(beta) for FRITZ!Box 7590: https://avm.de/fileadmin/user_upload/DE/Labor/Download/fritzbox-7590-labor-94458.zip
OS 7.39-labor(beta) for FRITZ!Box 7590-AX: https://avm.de/fileadmin/user_upload/DE/Labor/Download/fritzbox-7590_AX-labor-94459.zip

Liked by:

You need to login in order to vote

[Grisu]

Keep it the next 2 years as long as it is fast enough for your needs.
Prices will go down again someday and cards get better too.

I bought my 50% faster GTX-1050TI used for 80€ just at the beginning of covid, now they are sold used for 150.

You need to login in order to vote

[Grisu]

Usually only cold soldering and no need to completely replace the socket.

You need to login in order to vote

[Author]

Posts