- This topic has 717 replies, 4 voices, and was last updated 5 years, 9 months ago by
.
I have turned the stabiliser round now. Will post stats this evening
You need to login in order to vote
I also feel, if that does not work, @bully should contact BT and ask them to perform a remote line test, just to see if they can find any faults etc.
And of course unplug Telephone in the name of science
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
That’s what I was talking about
Looking forward to see full day stats but so far these looks promising after nearly half day.
You need to login in order to vote
FEC heavily reduced
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 35000000 bps US Actual Rate : 10798000 bps
DS Attainable Rate : 41312528 bps US Attainable Rate : 10451889 bps
DS Path Mode : Interleave US Path Mode : Fast
DS Interleave Depth : 585 US Interleave Depth : 1
NE Current Attenuation : 20 dB Cur SNR Margin : 5 dB
DS actual PSD : 6. 7 dB US actual PSD : 12. 7 dB
NE CRC Count : 26 FE CRC Count : 4151
NE ES Count : 9 FE ES Count : 2710
Xdsl Reset Times : 0 Xdsl Link Times : 2
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-09-0F-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
——————————– ATU-C Info ———————————
Far Current Attenuation : 27 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544ed086
DSLAM CHIPSET VENDOR : < IFTN >
> vdsl status more———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Near End Far End Note
Trellis : 1 1
Bitswap : 1 1
ReTxEnable : 0 0
VirtualNoise : 0 0
20BitSupport : 0 0
LatencyPath : 0 0
LOS : 0 0
LOF : 2 0
LPR : 0 0
LOM : 0 0
SosSuccess : 0 0
NCD : 0 0
LCD : 0 0
FECS : 3475820 59977 (seconds)
ES : 9 2710 (seconds)
SES : 0 33 (seconds)
LOSS : 0 2 (seconds)
UAS : 87 90912 (seconds)
HECError : 0 0
CRC : 26 4151
RsCorrection : 0 0
INP : 0 15 (symbols)
InterleaveDelay : 0 800 (1/100 ms)
NFEC : 255 76
RFEC : 16 16
LSYMB : 2897 11189
INTLVBLOCK : 255 76
AELEM : 0 —-
> vdsl status counts[ Counters: Showtime ]
Near End Far End Note
ElapsedTime : 80735 80735 (seconds)
CRC : 25 4151
FEC : 3475819 59977
HEC : 0 0
CRC_P : 10 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 8 2710
SES : 2 33
LOSS : 3 2
UAS : 0 0
LOFS : 0 0
[ Counters: 15Min ]
Near End Far End Note
ElapsedTime : 760 760 (seconds)
CRC : 1 0
FEC : 68334 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 1 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0
[ Counters: 1DAY ]
Near End Far End Note
ElapsedTime : 6160 6160 (seconds)
CRC : 1 0
FEC : 490069 1
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 1 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0You need to login in order to vote
Maybe worth trying filter on Telephone extension incase that is issue, apart from trying that must be electrical interference in house or DSL-Line break/dry joint outside house etc.
Either way, not many options left
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
- The topic ‘RT-AC86U 384.16 Hi, I updated to the latest Merlin firmware this morning (about 9 am) and since doing so my NE CRC count has gone up to 326598 over 5 hours. ...’ is closed to new replies.