Forum Replies Created
-
AuthorPosts
-
It may give you new IP, or may it be the same. When I capped my line last week I still was on same IP, but canβt guarantee. Edit Yes, it will disconnect.
Ok, thanks.
You need to login in order to vote
xdslcmd configure βmaxDataRate 35000 12000 100000 You will cap line to 35Mb on downstream, upstream stays at 12Mb. Cap working straight away once you hit enter and modem will resync with lower speed and higher snr(what should make your line more stable). To remove cap you will need to reboot modem. If you reboot modem accidentally you need to reapply cap.
Thanks.Β So when the modem resycns will it disconnect the internet and give me a new IP ?
You need to login in order to vote
That is a big burst Latest 15 minutes time = 12 min 26 sec FEC: 24288 0 Previous 15 minutes time = 15 min 0 sec FEC: 1032 0 Not bigger than on previous modem but still quite big. @Uk Sentinel On my line not much difference errors wise with SRA off. @Bully Did you consider to get BT to check your line or you prefer to play with modem first. π
Yeah not sure what to do, I am off work now till Monday morning.Β Would i need to reboot modem at all if i change stuff?
You need to login in order to vote
You guys have been busy in here today

I only have a laptop and do not want to leave it on over night plugged into mains to do any graphs.
xdslcmd profile –show
Modulations:
G.Dmt Disabled
G.lite Disabled
T1.413 Disabled
ADSL2 Disabled
AnnexL Disabled
ADSL2+ Disabled
AnnexM Disabled
VDSL2 Enabled
VDSL2 profiles:
8a Enabled
8b Enabled
8c Enabled
8d Enabled
12a Enabled
12b Enabled
17a Enabled
30a Enabled
US0 Enabled
Phone line pair:
Inner pair
Capability:
bitswap On
sra On
trellis On
sesdrop Off
CoMinMgn Off
24k On
phyReXmt(Us/Ds) Off/On
TpsTc AvPvAa
monitorTone: On
dynamicD: On
dynamicF: Off
SOS: On
Training Margin(Q4 in dB): -1(DEFAULT)xdslcmd info –stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 12222 Kbps, Downstream rate = 49704 Kbps
Bearer: 0, Upstream rate = 12198 Kbps, Downstream rate = 39994 KbpsLink Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.6 6.1
Attn(dB): 19.5 0.0
Pwr(dBm): 13.4 6.7
VDSL2 framing
Bearer 0
MSGc: 18 20
B: 31 238
M: 1 1
T: 64 63
R: 10 16
S: 0.0255 0.6235
L: 13200 3272
D: 1283 1
I: 42 255
N: 42 255
Counters
Bearer 0
OHF: 97879003 533601
OHFErr: 76 0
RS: 3225643728 2765574
RSCorr: 625931 7
RSUnCorr: 3550 0Bearer 0
HEC: 622 0
OCD: 28 0
LCD: 28 0
Total Cells: 1272800060 0
Data Cells: 824453921 0
Drop Cells: 0
Bit Errors: 0 0ES: 28 2655
SES: 0 31
UAS: 26 86680
AS: 240120Bearer 0
INP: 3.50 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 2.45 9.85
OR: 78.26 21.09
AgR: 40072.04 12219.06Bitswap: 164180/165203 17/17
Total time = 1 days 18 hours 42 min 26 sec
FEC: 625931 7
CRC: 76 0
ES: 28 2655
SES: 0 31
UAS: 26 86680
LOS: 0 1
LOF: 0 1
LOM: 0 0
Latest 15 minutes time = 12 min 26 sec
FEC: 24288 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 1032 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 18 hours 42 min 26 sec
FEC: 149261 0
CRC: 9 0
ES: 2 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 264066 3
CRC: 30 0
ES: 12 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 2 days 18 hours 41 min 59 sec
FEC: 625931 7
CRC: 76 0
ES: 28 2655
SES: 0 31
UAS: 0 86654
LOS: 0 1
LOF: 0 1
LOM: 0 0DSLAM type / SW version: IFTN:0xd086 (208.134) / v0xd086
Modem/router firmware: AnnexA version – A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 2 days 18 hours 42 min 0 sec
Resyncs: 0 (since 06 May 2020 19:28:10)Downstream Upstream
Line attenuation (dB): 19.5 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 39994 12198
SNR margin (dB): 6.6 6.1
Power (dBm): 13.4 6.7
Interleave depth: 1283 1
INP: 3.50 0
G.INP: Not enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)RSCorr/RS (%): 0.0194 0.0003
RSUnCorr/RS (%): 0.0001 0.0000
ES/hour: 0 0You need to login in order to vote
Phone disconnected for an hour and a half, stats below –
xdslcmd info –stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 12232 Kbps, Downstream rate = 49480 Kbps
Bearer: 0, Upstream rate = 12198 Kbps, Downstream rate = 39994 KbpsLink Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.5 6.1
Attn(dB): 19.5 0.0
Pwr(dBm): 13.3 6.7
VDSL2 framing
Bearer 0
MSGc: 18 20
B: 31 238
M: 1 1
T: 64 63
R: 10 16
S: 0.0255 0.6235
L: 13200 3272
D: 1283 1
I: 42 255
N: 42 255
Counters
Bearer 0
OHF: 62407926 214562
OHFErr: 49 0
RS: 2489652223 2891526
RSCorr: 371148 4
RSUnCorr: 1395 0Bearer 0
HEC: 257 0
OCD: 10 0
LCD: 10 0
Total Cells: 3175578604 0
Data Cells: 529225626 0
Drop Cells: 0
Bit Errors: 0 0ES: 20 2655
SES: 0 31
UAS: 26 86680
AS: 153102Bearer 0
INP: 3.50 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 2.45 9.85
OR: 78.26 21.09
AgR: 40072.04 12219.06Bitswap: 104727/105373 9/9
Total time = 1 days 18 hours 32 min 8 sec
FEC: 371148 4
CRC: 49 0
ES: 20 2655
SES: 0 31
UAS: 26 86680
LOS: 0 1
LOF: 0 1
LOM: 0 0
Latest 15 minutes time = 2 min 8 sec
FEC: 225 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 2198 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 18 hours 32 min 8 sec
FEC: 158544 0
CRC: 12 0
ES: 6 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 212604 4
CRC: 37 0
ES: 14 2655
SES: 0 31
UAS: 26 86680
LOS: 0 1
LOF: 0 1
LOM: 0 0
Since Link time = 1 days 18 hours 31 min 41 sec
FEC: 371148 4
CRC: 49 0
ES: 20 2655
SES: 0 31
UAS: 0 86654
LOS: 0 1
LOF: 0 1
LOM: 0 0You need to login in order to vote
Today’s stats –
xdslcmd info –stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 12293 Kbps, Downstream rate = 50368 Kbps
Bearer: 0, Upstream rate = 12198 Kbps, Downstream rate = 39994 KbpsLink Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.8 6.1
Attn(dB): 19.5 0.0
Pwr(dBm): 13.3 6.8
VDSL2 framing
Bearer 0
MSGc: 18 20
B: 31 238
M: 1 1
T: 64 63
R: 10 16
S: 0.0255 0.6235
L: 13200 3272
D: 1283 1
I: 42 255
N: 42 255
Counters
Bearer 0
OHF: 27569498 53603
OHFErr: 26 0
RS: 1996597486 87213
RSCorr: 138199 3
RSUnCorr: 557 0Bearer 0
HEC: 112 0
OCD: 4 0
LCD: 4 0
Total Cells: 902541263 0
Data Cells: 176403486 0
Drop Cells: 0
Bit Errors: 0 0ES: 11 2655
SES: 0 31
UAS: 26 86680
AS: 67635Bearer 0
INP: 3.50 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 2.45 9.85
OR: 78.26 21.09
AgR: 40072.04 12219.06Bitswap: 46337/46630 3/3
Total time = 18 hours 47 min 41 sec
FEC: 138199 3
CRC: 26 0
ES: 11 2655
SES: 0 31
UAS: 26 86680
LOS: 0 1
LOF: 0 1
LOM: 0 0
Latest 15 minutes time = 2 min 41 sec
FEC: 159 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 6871 0
CRC: 1 0
ES: 1 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 18 hours 47 min 41 sec
FEC: 138199 3
CRC: 26 0
ES: 11 2655
SES: 0 31
UAS: 26 86680
LOS: 0 1
LOF: 0 1
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 18 hours 47 min 15 sec
FEC: 138199 3
CRC: 26 0
ES: 11 2655
SES: 0 31
UAS: 0 86654
LOS: 0 1
LOF: 0 1
LOM: 0 0Stats recorded 04 May 2020 19:35:00
DSLAM type / SW version: IFTN:0xd086 (208.134) / v0xd086
Modem/router firmware: AnnexA version – A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 18 hours 47 min 45 sec
Resyncs: 0 (since 04 May 2020 19:34:24)Downstream Upstream
Line attenuation (dB): 19.5 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 39994 12198
SNR margin (dB): 6.8 6.1
Power (dBm): 13.3 6.8
Interleave depth: 1283 1
INP: 3.50 0
G.INP: Not enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)RSCorr/RS (%): 0.0069 0.0011
RSUnCorr/RS (%): 0.0000 0.0000
ES/hour: 0 0You need to login in order to vote
Could i use my smart hub 2 as a modem only and connect it to my Asus for the router and wifi ?
BTβs Smart Hub 2 does not offer the modem (Bridged) mode β and its DSL chipset is Broadcom and very locked down. I was just thinking of the Fritz!Box 3490 as this is a well built unit and gives you access to stats etc via UI and manages its own Bitswap / SRA etc so may be of benefit to yourself. (maybe) ! Alas I could not find an online Emulator for the Fritz!Box 3490 Alas not sure what stats the Smart hub gives, but maybe worth a try in the name of science

Some guy claims he has set up modem only mode ? first post here – https://community.bt.com/t5/Home-setup-Wi-Fi-network/Smart-Hub-2-as-a-Modem/td-p/1922978
You need to login in order to vote
Could i use my smart hub 2 as a modem only and connect it to my Asus for the router and wifi ?
You need to login in order to vote
Today’s stats –
xdslcmd info –stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 12239 Kbps, Downstream rate = 50560 Kbps
Bearer: 0, Upstream rate = 12228 Kbps, Downstream rate = 39994 KbpsLink Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.8 6.1
Attn(dB): 19.5 0.0
Pwr(dBm): 13.4 6.7
VDSL2 framing
Bearer 0
MSGc: 18 20
B: 31 238
M: 1 1
T: 64 63
R: 10 16
S: 0.0255 0.6220
L: 13200 3280
D: 1283 1
I: 42 255
N: 42 255
Counters
Bearer 0
OHF: 35968793 444292
OHFErr: 20 0
RS: 926959794 516592
RSCorr: 253116 4
RSUnCorr: 404 0Bearer 0
HEC: 57 0
OCD: 2 0
LCD: 2 0
Total Cells: 2486312448 0
Data Cells: 779755788 0
Drop Cells: 0
Bit Errors: 0 0ES: 7 2655
SES: 0 31
UAS: 26 84483
AS: 88239Bearer 0
INP: 3.50 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 2.45 9.83
OR: 78.26 21.15
AgR: 40072.04 12248.93Bitswap: 61493/61959 24/24
Total time = 1 days 31 min 5 sec
FEC: 253116 4
CRC: 20 0
ES: 7 2655
SES: 0 31
UAS: 26 84483
LOS: 0 1
LOF: 0 1
LOM: 0 0
Latest 15 minutes time = 1 min 5 sec
FEC: 39 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 866 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 31 min 5 sec
FEC: 1235 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 24 hours 0 sec
FEC: 251881 4
CRC: 20 0
ES: 7 2655
SES: 0 31
UAS: 26 84483
LOS: 0 1
LOF: 0 1
LOM: 0 0
Since Link time = 1 days 30 min 37 sec
FEC: 253116 4
CRC: 20 0
ES: 7 2655
SES: 0 31
UAS: 0 84457
LOS: 0 1
LOF: 0 1
LOM: 0 0Stats recorded 03 May 2020 14:57:55
DSLAM type / SW version: IFTN:0xd086 (208.134) / v0xd086
Modem/router firmware: AnnexA version – A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 1 day 0 hour 30 min 39 sec
Resyncs: 0 (since 03 May 2020 14:55:52)Downstream Upstream
Line attenuation (dB): 19.5 0.0
Signal attenuation (dB): Not available on VDSL2
Connection speed (kbps): 39994 12228
SNR margin (dB): 6.8 6.1
Power (dBm): 13.4 6.7
Interleave depth: 1283 1
INP: 3.50 0
G.INP: Not enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)RSCorr/RS (%): 0.0273 0.0008
RSUnCorr/RS (%): 0.0000 0.0000
ES/hour: 0 0You need to login in order to vote
I figured out why I could not access router via its ip address, the Local Access Config was set to HTTPS only and not both.
Attachments:
You need to login in order to vote
Not sure if this an issue because once Iβm logged in to router in adress bar it show router.asus.com. Did you have issues before update?
No, no issues before update.
You need to login in order to vote
-
AuthorPosts

