Forum Replies Created
-
AuthorPosts
-
February 14, 2020 at 9:37 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #6015
No, still interleaved on booth (upstream and downstream) after five days I put up snr on downstream up to 8db,will see if that change anything soon, if not may have to put on my line zyxel VMG1312-B10A for little while for better control on speed on downstream and upstream. How long it takes for you to go back on fastpatch when you switch modems?
You need to login in order to vote
February 9, 2020 at 1:34 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5987February 9, 2020 at 12:23 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5983He is playing fortnite, and making videos of gameplay in that game (mainly). He is really good but as you know low ping in games like that give you more fair play game comparing to other players.
You need to login in order to vote
February 9, 2020 at 12:08 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5981That’s interesting, I though you can squeeze as much as possible (g.inp, retx low, 3db etc) with broadcom based modem on Huawei…
Well at least its working the way you need that’s most important.
“Gaming prospective” sorry, but this bit make ma laugh right now, as I told my son that due to I change modem its need to adapt now so our ping in game instead of below 10ms (even 0ms) will be now 30ms plus 😂😂. Not happy days for now. 😜
You need to login in order to vote
February 9, 2020 at 10:16 am in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5979Well, you know I’m patient enough 😊
I will give dlm full two days to take first positive action as per previous experience, if upstream don’t jump in this time to fastpatch then I will start to thinking about. Are you still on Huawei cabinet? If yes why you use vigor? Thought famous zyxel VMG1312-B10A will be better on Huawei cab.
You need to login in order to vote
February 9, 2020 at 8:47 am in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5973To be honest, yesterday once I set all it was running constantly without any interruption, even checked stats for errors and nothing indicates that it may be interleaved next day….
Can’t believe is because I changed modem as in the past I switched between two different modems for couple of days (different chipsets) and never had that issue…
Wonder if not because this one running bt fw so doing funny things in background according to sys log…
You need to login in order to vote
February 9, 2020 at 7:07 am in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5971Woke up in this morning, checked vigor connection both upstream and downstream on interleave now 😡
Vigor was connected all afternoon yesterday and mess up completely my line now.
@Uk Sentinel
Could you please do screenshot of your Mpoa tab in wan settings? I just want to double check if on mine all is O.K, not sure if wan connection detection should be set to Arp or “always on”.
You need to login in order to vote
February 8, 2020 at 2:28 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5968Right, everything is set how it should be, mtu, bridge, changed vigor ip to 192.168.2.1 as per you instructions in different thread, got access to vigor and all working at the moment. Son testing connection now 😝, so far so good.
It’s good to listen when smart guy talking 😊
Like always you take all credits, thanks a lot.
You need to login in order to vote
February 8, 2020 at 12:57 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5964O.K, will try that, I will give him last chance. Asus is set to ppoe, it does connect just loosing connection.
You need to login in order to vote
February 8, 2020 at 12:50 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5962Damn, yours looks very simple compared to vigor2760. The only one thing is wonder me now. I connect wan from asus to lan 2 (192.168.2.1) in vigor and lan 1 (192.168.1.3) from vigor2760 to lan in asus to get stats. Could that be a problem? Lan1 on vigor got dhcp disabled and lan2 got dhcp enabled. Iwas looking for connections example but couldn’t find anything. Shouldn’t I connect only one cable to vigor?
You need to login in order to vote
February 8, 2020 at 8:04 am in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5958Asus rt-ax88u, but don’t think is anything to do with asus. It working perfectly with eci and zyxel VMG1312-B10A.
You need to login in order to vote
February 7, 2020 at 10:13 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5956This is the one working for me: (1464) 1492 is correct and this is what I got set in router, should be the same in Vigor?
Also could you please have look (if you using vigor 130) sys log explorer, enable web syslog and select All in “syslog type”, what types of logs you have?
You need to login in order to vote
February 7, 2020 at 4:24 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5952O.K will play with it tomorrow, don’t really want to get my line banned as I have this router connected for 4h with multiple ppoe sessions dropped. I will post updates.
Thanks a lot for you help.You need to login in order to vote
February 7, 2020 at 4:04 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5949I tested on fw 3.8.8.2 bt and on the latest 3.8.9.4 bt, on booth is the same. Actually I changed MTU to 1492 on vigor but not sure if that matters in bridge mode ,maybe that is the problem? Should I try non bt fw on it?
You need to login in order to vote
February 7, 2020 at 3:50 pm in reply to: Draytek Vigor2760 Any advice with extra settings for vigor 2670 used in bridge mode? #5945I will play with it tomorrow, I already had several disconnections with it today, don’t really want to get my line interleaved or even banded. In bridge mode nothing special was set, so I’m surprised that it keep dropping ppoe 🤔.
If I will set it up in modem router mode I guess I will have to enable DMZ for my router to handle all traffic to avoid double NAT.
I also tried two different fw and still the same…
You need to login in order to vote
-
AuthorPosts