› UKTH forums › 🛜 Wireless Routers & Modems › ASUS & Wireless › RT-AC86U 384.16 Hi, I updated to the latest Merlin firmware this morning (about 9 am) and since doing so my NE CRC count has gone up to 326598 over 5 hours. ...
- This topic has 717 replies, 4 voices, and was last updated 5 years, 10 months ago by
Bully.
-
AuthorPosts
-
June 6, 2020 at 9:18 am #7905June 6, 2020 at 9:25 am #7906
When I capped my speed to 35mbs on the HG612, I take it that cap is not in place still after swapping to the Draytek 130?
Correct
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
June 6, 2020 at 12:14 pm #7907Thanks.
still no improvements
———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 35000000 bps US Actual Rate : 10636000 bps
DS Attainable Rate : 45121488 bps US Attainable Rate : 10977776 bps
DS Path Mode : Interleave US Path Mode : Fast
DS Interleave Depth : 581 US Interleave Depth : 1
NE Current Attenuation : 20 dB Cur SNR Margin : 7 dB
DS actual PSD : 6. 5 dB US actual PSD : 13. 1 dB
NE CRC Count : 168 FE CRC Count : 4108
NE ES Count : 18 FE ES Count : 2677
Xdsl Reset Times : 0 Xdsl Link Times : 3
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-09-0F-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
——————————– ATU-C Info ———————————
Far Current Attenuation : 27 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544ed086
DSLAM CHIPSET VENDOR : < IFTN >
> vdsl status more———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Near End Far End Note
Trellis : 1 1
Bitswap : 1 1
ReTxEnable : 0 0
VirtualNoise : 0 0
20BitSupport : 0 0
LatencyPath : 0 0
LOS : 4 0
LOF : 0 0
LPR : 0 0
LOM : 0 0
SosSuccess : 0 0
NCD : 0 0
LCD : 0 0
FECS : 1401677 55010 (seconds)
ES : 18 2677 (seconds)
SES : 0 31 (seconds)
LOSS : 0 1 (seconds)
UAS : 34 89685 (seconds)
HECError : 0 0
CRC : 168 4108
RsCorrection : 0 0
INP : 0 15 (symbols)
InterleaveDelay : 0 800 (1/100 ms)
NFEC : 255 76
RFEC : 16 16
LSYMB : 2854 11189
INTLVBLOCK : 255 76
AELEM : 0 —-
> vdsl status counts[ Counters: Showtime ]
Near End Far End Note
ElapsedTime : 771870 771870 (seconds)
CRC : 168 4108
FEC : 1401675 55010
HEC : 0 0
CRC_P : 109 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 17 2677
SES : 0 31
LOSS : 0 1
UAS : 0 0
LOFS : 0 0
[ Counters: 15Min ]
Near End Far End Note
ElapsedTime : 874 874 (seconds)
CRC : 0 0
FEC : 1527 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0
[ Counters: 1DAY ]
Near End Far End Note
ElapsedTime : 20674 20674 (seconds)
CRC : 0 0
FEC : 38948 1
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0You need to login in order to vote
June 6, 2020 at 1:05 pm #7908I am sure it wont be long before next cab resynch, hopefully, Is your telephone extension and the phone itself still unplugged, ?
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
June 6, 2020 at 4:46 pm #7909The extension is still disconnected, the phone is plugged into master socket now.
You need to login in order to vote
June 6, 2020 at 4:50 pm #7910The extension is still disconnected, the phone is plugged into master socket now.
What phone brand/model is It as some models have real issues with FEC etc (Panasonics) some of there models etc?
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
June 6, 2020 at 4:55 pm #7911June 6, 2020 at 5:02 pm #7914It is a Panasonic – KX-TG7321E
Hopefully that one will not be a problem, ?
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
June 7, 2020 at 8:33 am #7919How do I find out? We are thinking of getting a new phone as the one we have is really old.
You need to login in order to vote
June 7, 2020 at 4:05 pm #7920How do I find out? We are thinking of getting a new phone as the one we have is really old.
I didn’t like to say
– BT supply a range of phones (https://shop.bt.com) but I am sure they are just rebranded (Philipps or something similar) and maybe a little low on quality, mine is a Gigaset and is a great wireless unit, alas I am not knowledgeable in this area, but I am sure between Gigaset and BT offerings, hopefully something in budget and suitable 
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
June 8, 2020 at 5:21 pm #7923Todays stats –
———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 35000000 bps US Actual Rate : 10636000 bps
DS Attainable Rate : 45280848 bps US Attainable Rate : 11022688 bps
DS Path Mode : Interleave US Path Mode : Fast
DS Interleave Depth : 581 US Interleave Depth : 1
NE Current Attenuation : 20 dB Cur SNR Margin : 7 dB
DS actual PSD : 6. 5 dB US actual PSD : 13. 1 dB
NE CRC Count : 206 FE CRC Count : 4110
NE ES Count : 32 FE ES Count : 2679
Xdsl Reset Times : 0 Xdsl Link Times : 3
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-09-0F-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
——————————– ATU-C Info ———————————
Far Current Attenuation : 27 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544ed086
DSLAM CHIPSET VENDOR : < IFTN >
> vdsl status more———————- ATU-R Info (hw: annex A, f/w: annex A/B/C) ———–
Near End Far End Note
Trellis : 1 1
Bitswap : 1 1
ReTxEnable : 0 0
VirtualNoise : 0 0
20BitSupport : 0 0
LatencyPath : 0 0
LOS : 4 0
LOF : 0 0
LPR : 0 0
LOM : 0 0
SosSuccess : 0 0
NCD : 0 0
LCD : 0 0
FECS : 4706499 55029 (seconds)
ES : 32 2679 (seconds)
SES : 0 31 (seconds)
LOSS : 0 1 (seconds)
UAS : 34 89685 (seconds)
HECError : 0 0
CRC : 206 4110
RsCorrection : 0 0
INP : 0 15 (symbols)
InterleaveDelay : 0 800 (1/100 ms)
NFEC : 255 76
RFEC : 16 16
LSYMB : 2854 11189
INTLVBLOCK : 255 76
AELEM : 0 —-
> vdsl status counts[ Counters: Showtime ]
Near End Far End Note
ElapsedTime : 938694 938694 (seconds)
CRC : 206 4110
FEC : 4706497 55029
HEC : 0 0
CRC_P : 175 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 31 2679
SES : 0 31
LOSS : 0 1
UAS : 0 0
LOFS : 0 0
[ Counters: 15Min ]
Near End Far End Note
ElapsedTime : 373 373 (seconds)
CRC : 0 0
FEC : 17643 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 0 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0
[ Counters: 1DAY ]
Near End Far End Note
ElapsedTime : 39073 39073 (seconds)
CRC : 5 0
FEC : 493835 0
HEC : 0 0
CRC_P : 0 0
CRCP_P : 0 0
CVP_P : 0 0
NCD : 0 0
LCD : 0 0
ES : 3 0
SES : 0 0
LOSS : 0 0
UAS : 0 0
LOFS : 0 0You need to login in order to vote
June 8, 2020 at 6:14 pm #7924You get lot of FEC errors last 10h, did you changed anything? These are like 3 times worse than previous stats. Your average from 120k FEC errors within 24h will go up to 1mln now. I was full of hope that you may get fastpath tonight, but now I’m not sure. Try to unplug telephone from filtered faceplate and check stats after few hours.
You need to login in order to vote
June 8, 2020 at 6:52 pm #7925June 8, 2020 at 7:12 pm #7926How about any telephone calls or any missed calls as that is when even I get a few CRC’s and FEC’s due to ring pulse (actual ring tone) etc.
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
June 8, 2020 at 8:28 pm #7927 -
AuthorPosts
- The topic ‘RT-AC86U 384.16 Hi, I updated to the latest Merlin firmware this morning (about 9 am) and since doing so my NE CRC count has gone up to 326598 over 5 hours. ...’ is closed to new replies.

