[Grisu]

OS 7.30 for FRITZ!Box 5590-Fiber: https://download.avm.de/fritzbox/fritzbox-5590-fiber/

Liked by:

You need to login in order to vote

[Grisu]

OS 7.15 for FRITZ!Repeater 310a: https://download.avm.de/fritzwlan/fritzwlan-repeater-310-a/other/
OS 7.15 for FRITZ!Repeater 310b: https://download.avm.de/fritzwlan/fritzwlan-repeater-310-b/other/
OS 7.30 for FRITZ!Repeater 1750e: https://download.avm.de/fritzwlan/fritzwlan-repeater-1750e/other/

Liked by:

You need to login in order to vote

[Grisu]

Nothing new to me that older chips can be better on old lines than newer ones which are optimized for newer or other protocols.

You need to login in order to vote

[Grisu]

PowerLine often brings new problems, you should avoid it if possible.

Liked by:

You need to login in order to vote

[Grisu]

WPA3, PMF, unsupported channels and some more ‘features’ – just some ideas why they wont connect.

Liked by:

You need to login in order to vote

[Grisu]

Yes, I think you mean Freetz, but they don’t support DSL only router-funcionality afaik.
It is not like Merlin using AsusWRT and modifying for better results, they only use the hardware with their own FW.

Liked by:

You need to login in order to vote

[Grisu]

Sorry, never used TV or made manual manipulations in config (although this is possible with little knowlegde how to do).
What I know for sure is that here (in my coutry) the config for TV is done by provider from ACS.
And there is no workaround for it and you wont get credentials too, even if you are able to modify config on your own.

You could analyze a working box cofigured for TV for this provider and might patch your config accordingly.
Passthrough mode wont help I think, but maybe even worth a try.

It might be similar to manually config VoIP, where you are able to set different VLAN-ID in advanced telefony connection settings, but nothing to do this for TV in GUI.
Most knowledge about AVM-boxes are found in ip-phone-forum.de, possibly they could help.

PS: Why is your posting under mine, I already saw it when writing and #21536 is less than #21537?

Liked by:

You need to login in order to vote

[Grisu]

In Europe we use last weekend in the month, so yes, 5th is correct and will use 4th if there is no 5th.

I asked Asus years ago to correct this from 5th to last like it is really implemented, but no interest on their side to make this little viewing-change for clarity.

What still little confusingly, wheter to use 2nd or 3rd hour in October.
I think to remember from my testings, that 3rd will be the correct setting to change summertime at 3 to 2 wintertime.

Liked by:

You need to login in order to vote

[Grisu]

Advanced power settings (might not work for USB-HDD):

Windows 10 – How to control hard drive power down

or: https://www.youtube.com/watch?v=EorQ-rbVCps

Liked by:

You need to login in order to vote

[Grisu]

And you can have a look how it is integrated into the system, maybe it is dedected as internal disk and not as removable.

Usually they spin down after configurable time (5-30 minutes are mostly set).

You need to login in order to vote

[Grisu]

Only broken wires where they are moved when opening the door – closed there is enough contact for function.
It is like this since years, so not worth further actions.

Liked by:

You need to login in order to vote

[Grisu]

This works for other cars too, my Skoda does it the same way.
You dont even have go down, just when it is up press as long till motor is turning off.

Have to do it often, as there is a bad contact in the wireing near door angle (broken wire), so when opening door it probably loose contact and have to be reseted next time driving.
Not worth to repair.

Liked by:

You need to login in order to vote

[Grisu]

OS 7.30 for FRITZ!Repeater 600v2: https://download.avm.de/fritzwlan/fritzrepeater-600v2/other/

Liked by:

You need to login in order to vote

[Grisu]

Maybe its use as backup disk or there are running antivirus processes.
Or you opened an .iso which is mounted as drive or zip and blocking the HDD.
Whats happening if you deactivate drive and/or usb in device-manager?

Sorry, I didnt understand the meaning of eject in the initial posting.

I cant eject a HDD/SSD only remove it from PC (=unplug USB connector).
I only eject a disc from CD/DVD drive, but I cant eject the drive itself, it can only be removed in my understanding.

You need to login in order to vote

[Grisu]

click “remove HW” on taskbar right side and remove this drive before unplug USB.

You need to login in order to vote

[Author]

Posts