Forum Replies Created
-
There is something wrong with your boiler, thats why it not heating in the moment you turn on hot water.
Let it be repaired and be happy again, no need to change anything.
(not relevant to boilers)
Probably it dosnt recognice warm water flowing, thats why it doesnt turn on the same moment you take warm water.
Flowmeter needs to be checked or adjusted to lower flows.Liked by:
You need to login in order to vote
Cost are only depending on consumed energy.
A 30kW will run less hours a day than a 24kW, but at the end they both will use same amount of energy (gas). The 30kw may turn on/off more often a day.
It depends on your house whether it can “consume” 30kw or better stay with 24kW – the fewer radiators the less kw.
If you take a too small one it may not bring enough heat into your house on very cold days.
But if you did not freece till now it is usually better to stay with the smaller one.Liked by:
You need to login in order to vote
So I think its better to use a UPS with stabilized 12V output instead of converting upto 230V AC and with power adapter back to 12V again.
For sure there may be much better choices, didnt want to search for and took the first: https://www.amazon.co.uk/Mini-10400mAh-Router-Battery-Backup/dp/B0CNT6LLHP/ref=sr_1_16
-
This reply was modified 1 year, 9 months ago by .
-
This reply was modified 1 year, 9 months ago by .
-
This reply was modified 1 year, 9 months ago by .
Liked by:
You need to login in order to vote
You can use it without wifi too, but than you need to use LAN backhaul between boxes.
Liked by:
You need to login in order to vote
Easy to do if you mesh your 7530 better per LAN (WLAN would be possible too) with your 7530-AX.
Then you get to option (under mesh) to provide phonebook and telephony to the other box.
When done you may register an DECT phone on the other box or use its fon-connector.
Just configuration to do so.
I use it since years like that for my parents nearby.
You can configure on each which number shall ring on which clients or connector.
Only there is no DECT-roaming, so your DECT phone may be registered to either one or the other box.
You probably (depending on phone) can register it to both boxes, but only one is active and you have to change it to the other one if you leave the supply range of the DECT.All used phone numbers have to be registred on the master box and are available on mesh-client too.
BTW: There is no 7530-KA, its an 7530, KA is only an identification code not part of the model number whereas 7590-AX is a different model (with AX-Wifi).
-
This reply was modified 1 year, 10 months ago by .
-
This reply was modified 1 year, 10 months ago by .
-
This reply was modified 1 year, 10 months ago by .
-
This reply was modified 1 year, 10 months ago by .
Attachments:
Liked by:
You need to login in order to vote
Dont want to disappoint you, but AI will only be available only on the iPhone 16 lineup and the iPhone 15 Pro and Pro Max due to hardware-limitations.
https://www.nytimes.com/wirecutter/reviews/iphone-apple-intelligence-ai-features-launch/
Liked by:
You need to login in order to vote
No, there wont change any IP range, neither main nor guest, they will put only a route from one to the other to get access to the other clients.
Liked by:
You need to login in order to vote
Maybe with Merlin on it (if supported model) you have more options (long time that I had Asus, so dont know).
You need to login in order to vote
On AVM there is the possibility to let see clients on guest-SSID each other or to disable it.
Maybe on Asus there is a similarly option to activate.
But you probably have to activate WLAN as backhaul, because now it is connected via LAN to the master router and a LAN-connection is on home network and not on guest network.For this on AVM you can set LAN4 to act as guest, so clients (or a router) on LAN4 will be in guest network like WLAN clients on guest SSID.
Dont know wether Asus has these features or not.Liked by:
You need to login in order to vote
-
This reply was modified 1 year, 9 months ago by
