Forum Replies Created
-
AuthorPosts
-
July 8, 2026 at 7:28 pm in reply to: Asuswrt-Merlin 3006.102.8 has now been released – 08/07/2026 AsuswrtβMerlin 3006.102.8 has been released for supported models, bringing updated GPL merges, improved UPnP compatibility, and enhancements to OpenVPN functionality. Asuswrt-Merlin 3006.xxx Changelog ================================= 3006.102.8 (8-July-2026) - NOTE: There has... #42967
Will be loading this new Asuswrt-Merlin 3006.102.8 release on my RT-BE92U later tonight to see how it handles.
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
Another option could be a Powerline Adapter (PLC devices) with wifi, which send data over copper mains wires and require circuits to be ideally on the same ring main or consumer unit is an easy option and Netgear and TP-Link offer great options,Β Very handy with those hard to reach locations.
ASUS BE routers are built for power users who want longβterm firmware support, real VLANs on certain models and deep network control, while TPβLink BE routers are aimed at normal users who want fast WiβFi, a clean UI, and simpler setup, but with lighter updates and fewer advanced features.
In short: ASUS = control and longevity. TPβLink = speed and simplicity.
Another good option is GL.iNet as this uses OpenWrt and support lifecylces are slightly better than ASUS’s usually.
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
July 6, 2026 at 7:45 pm in reply to: ASUS RT-BE92U – Official Thread New RT-BE92U Firmware 3.0.0.6_102_37025 Firmware 3.0.0.6_102_37025 11/05/2024 – Release note – Bug Fixes and EnhancementsοΌ 1. Optimized memory management mechanisms, improving system efficiency and stability. 2. Strengthened input validation and... #42954Very useful, I didn’t mention this earlier as I also enabled the option to place the IoT network on the 192.168.52.0/24 subnet and turned on AP Isolation, ensuring that devices on the IoT network canβt communicate with one another. Combined with the dedicated VLAN, it gives each device its own almost sandboxed environment, which is ideal for limiting lateral movement and keeping lessβtrusted IoT gear properly contained.
Sounds good in theory at least, now itβs just down to the firmware staying consistent with the isolation rules. Β

In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
Just another thought, if you’re already thinking of upgrading your main router anyway, and budget isn’t a concern, have you considered buying a newer ASUS router and using your existing RT-AX86S as an AiMesh node? It would likely give you better coverage than a range extender, and you’d still get good use out of the AX86S.
Moreover, the RT-AX86S eol date must be just around the corner so no harm in planning ahead.
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
July 3, 2026 at 7:42 pm in reply to: ASUS RT-BE92U – Official Thread New RT-BE92U Firmware 3.0.0.6_102_37025 Firmware 3.0.0.6_102_37025 11/05/2024 – Release note – Bug Fixes and EnhancementsοΌ 1. Optimized memory management mechanisms, improving system efficiency and stability. 2. Strengthened input validation and... #42937This week, I reconfigured my ASUS RT-BE92U router to better handle my growing collection of smart home gear, including a robotic lawnmower, smart door cameras, a robotic hoover, and security cameras etc. Itβs great to see that ASUSβs built-in ‘IoT Network’ feature automatically creates a dedicated VLAN (ID 52) out of the box, making robust network isolation and security separation incredibly easy to deploy
Good to see this work in practice.

In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
As follow on, finished setting up my Reolink D340B and chime and so far seems to be working well, notifications are a bit annoying after a while so having to adjust sensitivity and already disabled the detection alarm for Animals.
Note: It’s still early days, but the only real issue I’ve noticed so far is the speech quality when using the intercom system. The audio sounds a little muffled, although it’s something I’ll need to experiment with a bit more.
A few more pictures of my setup for reference.
Reolink D340B mounted on external wall ‘using the mounting wedge’

Reolink Door Chime plugged into house power socket

Screen Shot of Reolink App

In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
RS300 Firmware Version 1.2.7.2
Release Date: June 1, 2026
Bug Fixes:
- Addes cloud debugging support.
- Addes patch for WiFi stability
- Changes the QoS bandwidth checking mechanism to avoid memory leak.
- Fixes FW-based Internet detection for App onboarding.
- Fixes IoT Network related issues.
- Fixes PPPoE detection fail during GUI onboarding.
- Fixes Hostapd issue for All RS-Routers.
- Fixes No Internet detected when connected directly to ONT device without WAN IP address received.
- Fixes ACL List not retaining Disconnected Devices and Showing Limited Entries in GUI.
- Fixes various security issues.
Download Link:Β https://www.downloads.netgear.com/files/GDC/RS300/RS300-V1.2.7.2.zip
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
Mova ViAX 300 β First Impressions After a Few Weeks
I’ve had the ViAX 300 for a few weeks now, so thought I’d post a few thoughts in case anyone else is looking at one.
The main selling point for me was not having to install a boundary wire. Setup was pretty straightforward through the app and once the lawn was mapped, it was ready to go.
So far it’s been doing a really good job. Because it cuts little and often, the lawn always looks tidy rather than getting that “just been mowed” look once a week. It’s also a lot quieter than I expected, so I don’t really notice it working.
Navigation has impressed me too. It copes well with plant pots, furniture and other bits left in the garden. My patio chairs get moved around quite a bit and it hasn’t seemed bothered by that.
I was also a bit concerned about putting the charging dock on the patio instead of the grass, but it’s been absolutely fine. It leaves the dock, finds the lawn and returns to charge without any issues and avoids obstacles such as our dog regularly.

The app I do like as it does everything I need. Scheduling is simple, you can see what the mower is doing and changing settings only takes a few taps and you can actually watch the mower cut grass via its onboard HD camera as it can live stream.
The app, which was the 2nd main selling point for me, allows you to set no-go zones and choose the cut pattern for your lawn, I particularly like the straight parallel lines option.

Overall, I’m really happy with it given its price point. It’s saved me a lot of time, the lawn always looks presentable and, so far, it’s been one of those gadgets that actually lives up to expectations.
Only downside is that it leaves a 10-15cm cutting edge due to position of the robot mowers cutters, luckily we have a small garden with a couple of trees, 5 minuites with a grass strimmer every other week is not an issue for me.
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
. Grisu Said:After 6 days I have to login again, should be a month or even more.

Interestingly, two of my accounts also required me to log back in again a day or so ago, I have checked cookie expiration and its still 3 months from the 22nd June. I will keep watching this also over the next six days to see if this happens again.

In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
Unfortunately had to revert back to 3006.102.6 as we had issues with our iPhone’s printing to our Epson printer via Epson iPrint app again, I also noted a few UI glitches, especially after making changes and clicking the APPLY button required a screen refresh (F5) to stop screen locking. Also noted that wired clients where showing under wireless.
But 3006.102.8_beta1 did seem to cure the issue I had streaming Youtube etc. via my iPhone when on a relatively week signal.
Its a beta, early days but looking good.
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
This morning I updated my RTβBE92U from 3006.102.6 β 3006.102.8_beta1. Early impressions: upgrade went smoothly, no resets needed. UI feels a bit snappier, and DHCP/OpenVPN changes are visible. Still keeping an eye on the known Client List quirks that others have mentioned online, but so far itβs stable on my unit.
Also interested in the issue I had with Epson printer via Epson iPrint app that did not work with 3006.102.7_2.
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
June 12, 2026 at 3:47 pm in reply to: @GNUton back on Track – 3006.102.4_1-gnuton0_beta1 and 3004.388.9_2-gnuton1 Good to see @GNuton is once again actively publishing new beta firmwares since the end of last month 3006.102.4_1-gnuton0_beta1 (Pre-release) GNUton’s Asus Merlin changelog Date: May 24, 2025 Release:... #42809GNUton 3004.388.11_1-gnuton1
Date: June 10, 2026
Release: 3004.388.11_1-gnuton1
- UPDATED: Upstream code to 3004.388.11
- UPDATED: Merged GPL 388_25575
- REMOVED: AiCloud support, due to security reasons.
https://github.com/gnuton/asuswrt-merlin.ng/releases/tag/3004.388.11_1-gnuton1
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
Interesting, as connected to Internet I believe means VLAN 911 is working.
- ONT needs rebooting after swapping routers
- VLAN 911 isnβt applied
- WAN type is wrong (not Automatic IP)
If above has been applied correctly, switch off you ONT and Router for half an hour and then power back on your ONT first and then your Router so its receives a new IP address (DHCP).
If this doesn’t work, can you show me or detail the IPTV settings page on your TUF AX4200 and if WAN type has been set to Automatic IP.
In a completely sane world, madness is the only freedom (J.G.Ballard).
You need to login in order to vote
-
AuthorPosts






